The Stage 2 Performance Package engineered by FCA US LLC is the answer to your desire for even more performance. When combined with the Stage 1 package, it will add up to 56 HP and 30 lb-ft of torque while maintaining excellent manners at idle and part-throttle. The package features a new Mopar® Performance Cam, as well as new Mopar® Performance Valve Springs. The cam measures 222/230 at 0.050 (270/282 at 0.006) and has just under 0.600 lift with a 115 degree lobe separation angle. Mopar® developed the cam to make the best use of the VCT feature. The Mopar® Performance Valve Spring, designed specifically for the HEMI® engine, uses the production 5.7L spring seat, retainer, and locks with the cam while maintaining durability.The package also includes: Heavy duty Push Rods, set of Tie Bars, upper and lower Gasket Set. A new Powertrain Control Module (PCM) will be required for Stage 2, but it is not included in this package. Badges are not included in the packageIMPORTANT NOTICE: Federal law, and many state, provincial and local laws impose vehicle emissions and safety standards that prohibit the use of a motor vehicle on public streets and highways if the vehicle is not compliant with such standards. FCA US LLC customers are responsible for complying with applicable federal, state, provincial and local laws, including environmental and safety laws, and for determining whether their modified vehicle complies with such laws. If this Stage 2 Performance Package is installed on a vehicle, use of the vehicle on public streets or highways is prohibited