Genuine Mopar Engines

Other Name: Engine Complete

Replaced by: 68303088AC

Features: Own the same legendary 5.7L HEMI® engine found in the 2015 and newer Dodge Challenger. Features: 383 horsepower and 417 lb-ft of torque. New engine assembly, not a reman. Includes complete engine assembly with water pump, fly wheel and clutch, front sump oil pan, intake manifold with throttle body, fuel injectors and coil packs. Engine Type GEN III HEMI® V8Displacement 345 cu inBore 99.5 mmStroke 90.9 mmBlock (53021214DR) Cast Iron with 4 Bolt Powder Metal CapsCrank Material Nodular IronConnecting Rods Powdered MetalPiston Material Hypereutectic AluminumCamshaft Nodular IronValve/Lift Duration @ 0.15 mm (.006) Int: 13.1 mm (0.516") - 259 deg. Exh: 12.8 mm (0.504") - 289 deg.Cylinder Heads Aluminum, HEMIspherical ChamberIntake Valve Size 52.1 mmExhaust Valve Size 39.4 mmCompression Ratio 10.5:1Peak RPM 5600Recommended Fuel Premium CRATE HEMI® ENGINES ARE DESIGNED FOR INSTALLATION IN: 1. ANY MOTOR VEHICLE MANUFACTURED PRIOR TO MODEL YEAR 1976 OR 2. COMPETITION VEHICLES DRIVEN ON TRACKS OR OFF-ROAD. Vehicles manufactured 1976 and later equipped with this part should not be driven on public roads or highways. Mopar customers are responsible for ensuring that their use of their vehicle equipped with this part complies with applicable federal, state/provincial, and local laws, regulations, and ordinances. Vehicles manufactured 1976 and later equipped with this part and driven on public roads or highways may violate U.S., California, Canadian, or local motor vehicle emissions laws and regulations."

Other Name: CAMSHSFT-Engine

Stage 2 Performance Camshaft with phase limiter: The Mopar® performance camshaft P5160018 is based on the popular COMP series of camshafts with slightly modified cam timing to increase low-end torque without sacrificing high-end power (thanks to an optimized VCT calibration). The cam measures 222/230 at 0.050 (270/282 at 0.006) and has just under 0.600 lift with a 115 degree lobe separation angle.This part is designed and intended solely for use in competition vehicles driven on tracks or off-road. Vehicles equipped with this part should not be driven on public roads or highways.Mopar customers are responsible for ensuring that their use of their vehicle equipped with this part complies with applicable federal, state/provincial, and local laws, regulations, and ordinances. Vehicles equipped with this part and driven on public roads or highways may violate U.S., California, Canadian, or local motor vehicle emissions laws and regulations.

Other Name: Engine Complete

Replaced by: 68303090AC

Step up to the next level of performance with the SRT® 6.4L HEMI® Engine. With 485 hp and 475 lb.-ft. of torque, this complete engine assembly includes a water pump, flywheel and clutch, front sump oil pan, intake manifold with throttle body, fuel injectors and coil packs. Features: 392 cu. in. 103.9mm Bore 94.6mm Stroke Cast Iron Block with 4-Bolt Powder Metal Caps Forged Steel Crank Material Powdered Metal, Floating Pin Connecting Rods Hypereutectic Aluminum Piston Material Nodular Iron Camshaft Aluminum, Hemispherical Chamber Cylinder Heads 54.3mm Intake Valve Size 42mm Exhaust Valve Size 10.9:1 Compression Ratio 6,400 Peak RPM CRATE HEMI® ENGINES ARE DESIGNED FOR INSTALLATION IN: 1. ANY MOTOR VEHICLE MANUFACTURED PRIOR TO MODEL YEAR 1976 OR 2. COMPETITION VEHICLES DRIVEN ON TRACKS OR OFF-ROAD. Vehicles manufactured 1976 and later equipped with this part should not be driven on public roads or highways. Mopar customers are responsible for ensuring that their use of their vehicle equipped with this part complies with applicable federal, state/provincial, and local laws, regulations, and ordinances. Vehicles manufactured 1976 and later equipped with this part and driven on public roads or highways may violate U.S., California, Canadian, or local motor vehicle emissions laws and regulations.

Other Name: BLADE-WIPER

Replaced by: PW100013AC

Other Name: Engine-Complete

Replaced by: 68303089AC

Features: 376 cu. in. 103.9mm Bore 90.9mm Stroke Cast Iron Block with 4-Bolt Powder Metal Main Caps Forged Steel Crank Material Connecting Rods and Floating Pins with Diamond-Like Coating Forged Piston Material Nodular Iron Camshaft Valve/Lift duration @ 0.15mm. Int: 14.25 (0.561) mm 278 deg. Hollow stems, Exh: 14.0 (0.551) mm 304 deg. Sodium-filled stems 356 Aluminum, Hemispherical Chamber Cylinder Heads 54.3mm Intake Valve Size 42mm Exhaust Valve Size 9.5:1 Compression Ratio 6,200 Max RPM CRATE HEMI® ENGINES ARE DESIGNED FOR INSTALLATION IN: 1. ANY MOTOR VEHICLE MANUFACTURED PRIOR TO MODEL YEAR 1976 OR 2. COMPETITION VEHICLES DRIVEN ON TRACKS OR OFF-ROAD. Vehicles manufactured 1976 and later equipped with this part should not be driven on public roads or highways. Mopar customers are responsible for ensuring that their use of their vehicle equipped with this part complies with applicable federal, state/provincial, and local laws, regulations, and ordinances. Vehicles manufactured 1976 and later equipped with this part and driven on public roads or highways may violate U.S., California, Canadian, or local motor vehicle emissions laws and regulations.

Other Name: Spring-Valve

Performance Valve Springs - GEN III HEMI® (5.7L/6.4L) : Made from the same high-strength material as the valve springs found in the Dodge Viper, the Mopar® Performance Valve Spring was designed for high lift camshaft profiles (up to 0.625 lift) such as the Mopar® Performance 5.7L Cam (part number P5160018). This spring will work with the factory seats, retainers, and locks and require no shims or machining of the cylinder head (Shims required for 6.4L application).

Other Name: Engine Complete

Replaced by: 68303091AC

Redeye Crate Engine Assembly