How to Remove the Blower Motor Assembly and Blower Motor Resistor in a Chrysler 200?

Disconnect the negative battery cable. Remove the insulation panel and unlock the connector. Remove the 3 mounting screws and disconnect the wire harness. For models with ATC, disconnect the electrical connectors for the blower motor power module. Remove the mounting fasteners from the blower and power module. Disconnect the electrical connectors from the blower motor resistor and remove the mounting fasteners.

Genuine Chrysler 200 Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Blower Motors found

View related parts
Chrysler 200 Motor-Blower With Wheel
Part Number: 68223053AC
$148.74 MSRP: $227.00
You Save: $78.26 (35%)
ADD TO CART
Product Specifications
- Other Name: Motor Blower with Wheel; Blower Motor
- Replaced by: 68223053AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2017 Chrysler 200 | C AWD, C FWD, Limited, LX, S AWD, S FWD | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chrysler 200 Motor-Blower With Wheel
Part Number: 68223053AB
$148.74 MSRP: $227.00
You Save: $78.26 (35%)
ADD TO CART
Product Specifications
- Other Name: Motor Blower with Wheel
- Replaced by: 68223053AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015 Chrysler 200 | C AWD, C FWD, Limited, LX, S AWD, S FWD | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chrysler 200 Motor-Blower With Wheel
Part Number: 5191345AA
$179.22 MSRP: $270.00
You Save: $90.78 (34%)
ADD TO CART
Product Specifications
- Other Name: Motor Blower with Wheel; Blower Motor, Dash Control Unit
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Chrysler 200 | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, S Convertible, S Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 3.6L

Chrysler 200 Blower Motor

Blower Motor is a major part of Chrysler 200 cars that control the modulating of air into the canopy of the vehicle. The blower motor is used to control the supply of air; thus, drivers can easily regulate the temperature of the car depending on the weather prevailing. The blower motor controls are easily accessible usually hooked to a control module by conductor wires. However, these controls may shut poorly, due to either electronics or perhaps a circuit board malfunction, or be destroyed and disabled, which causes a lack of regulation of heating and air-conditioning systems. Some of the signs that may indicate that the blower motors may be malfunctioning include; the inability to regulate the temperatures inside the cabin and ascertainment of damages on the controls. In sum, it can be noted that the blower motor is essential for creating comfort as well as managing the climate inside Chrysler 200 automobiles.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler 200 Blower Motor at great affordable prices. Moreover, all genuine Chrysler 200 Blower Motor come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler 200 Blower Motor Parts Questions & Experts Answers

Motor-Blower With Wheel
68223053AB
Q: How to Remove the Blower Motor Assembly and Blower Motor Resistor in a Chrysler 200?
A: Disconnect the negative battery cable. Remove the insulation panel and unlock the connector. Remove the 3 mounting screws and disconnect the wire harness. For models with ATC, disconnect the electrical connectors for the blower motor power module. Remove the mounting fasteners from the blower and power module. Disconnect the electrical connectors from the blower motor resistor and remove the mounting fasteners.