The Brake Disc is an important component of the disc brake system in Chrysler 200 automobiles where it offers the contact surface that the brake pads requires to entail the rotational inertia of the automobile. Sitting on the axle or the hub, the rotor turns along with the wheel, when the brakes are turned on, hydraulic pressure squeezes the caliper, thus pressing the pads against the rotor. This design brings better cooling even on the so-called vented rotors equipped with cooling flutes, usually the front ones, and the solid disc and drum ones may be the rear ones in some vehicles. Chrysler 200 Brake Discs have basically cast iron construction with composit possibilities of cast iron with steel in the center. Modifications on the disc like drilled or slotted rotors improve on heat breaking and noise reduction and at the same time increase on wear on the pads. Special attention needs to be paid to the defectivity, as such factors as scoring, warping, and excessive runout of the disk have a negative impact on the braking force. However, it is more preferable to replace Chrysler 200 Brake Discs in pair per axles in order to get balance and good outcome for the car's brake system.