×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Chrysler 300 Automatic Transmission Filter
AT Filter- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Automatic Transmission Filters found
Chrysler 300 Filter-Transmission Oil
Part Number: 52108325AA$37.93 MSRP: $51.85You Save: $13.92 (27%)
Chrysler 300 Filter-Transmission Oil
Part Number: 52852913AB$38.70 MSRP: $57.85You Save: $19.15 (34%)
Chrysler 300 Filter-Transmission Regulator Valve
Part Number: 3878313$2.95 MSRP: $4.35You Save: $1.40 (33%)
Chrysler 300 Automatic Transmission Filter
The Automatic Transmission Filter in Chrysler 300 is very vital since it is responsible for capturing contaminants and wear by-products as the advance of healthy automatic transmission system, in the same way, as engine oil filter. This function is rather useful to stop the possible harm that may be caused to the transmission and enable it work optimally. Automatic Transmission Filter should also be replaced frequently as a part of routine maintenance since the filter gets clogged over time as the vehicle continues to operate. Several generations of Chrysler 300 models have been equipped with different types of Automatic Transmission Filters which were developed to offer such features as longer service life or increased filtration properties. As these filters could seem quite similar absolutely, internally they comes in rather different and as a result may turn out ineffective. In any case, Chrysler 300 Automatic Transmission Filters serve to provide just the degree of protection that the vehicle's transmission system requires for that particular model year.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler 300 Automatic Transmission Filter at great affordable prices. Moreover, all genuine Chrysler 300 Automatic Transmission Filter come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Chrysler 300 Automatic Transmission Filter Parts Questions & Experts Answers
- Q: How to drain and replace transmission fluid and Automatic Transmission Filter in a Chrysler 300?A: At specified time intervals, drain and replace the transmission fluid after the vehicle has completely cooled down. Before starting, purchase the recommended transmission fluid and a new filter. Additionally, gather tools such as jack stands, a drain pan, newspapers, and clean rags. Raise and support the vehicle on jack stands. Place a drain pan and remove the front and side transmission pan mounting bolts. Loosen the rear pan bolts and carefully pry the transmission pan loose with a screwdriver to allow the fluid to drain. Remove the remaining bolts, pan, and gasket, and clean the gasket surface of the transmission. Drain the fluid from the pan, clean it with solvent, and dry it with compressed air. Remove the filter and seal, then install a new filter seal and the new filter. Ensure the gasket surface on the transmission pan is clean. Install a new gasket if working on a NAG1 transmission, or clean the pan and transmission surfaces with lacquer thinner and apply ATF-resistant RTV sealant if working on a 42LE transmission. Bolt the pan in place and tighten the bolts gradually until the final torque figure is reached. Lower the vehicle and add the specified amount of automatic transmission fluid through the filler tube. Check for leaks during the first few trips. To check the fluid level, start the engine with the parking brake set and move the shift lever through all gear ranges, ending in Neutral. Wait for at least 2 minutes. With the transmission at normal operating temperature, insert the dipstick into the filler tube and note the fluid level. Use a scan tool to check the temperature of the fluid and determine the correct fluid level using the temperature and the height of the fluid on the dipstick. If additional fluid is required, add it directly into the tube using a funnel and check the level until it's correct. Finally, install the dipstick tube cap.
Related Chrysler 300 Parts
Browse by Year
2023 Automatic Transmission Filter 2022 Automatic Transmission Filter 2021 Automatic Transmission Filter 2014 Automatic Transmission Filter 2013 Automatic Transmission Filter 2012 Automatic Transmission Filter 2011 Automatic Transmission Filter 2010 Automatic Transmission Filter 2009 Automatic Transmission Filter 2008 Automatic Transmission Filter 2007 Automatic Transmission Filter 2006 Automatic Transmission Filter 2005 Automatic Transmission Filter