Vehicle exterior lights include front park/turn signal lights, inner and outer front parking lights, front side marker lights, fog lights, center high-mounted brake lights, tail lights, and license plate lights. To replace the fog light bulb, raise the vehicle, remove the splash shield, disconnect the connector, remove the bulb holder, and install the new bulb. The center brake lights cannot have individual bulbs replaced. To replace tail light bulbs, open the trunk, disconnect the connector, remove the taillight assembly, and replace the bulb. The license plate light bulb is in the rear bumper cover, remove the housing screws, the bulb socket, and replace the bulb. The reading light bulbs require prying off the lens, removing the housing, and replacing the bulb. The vanity light bulbs can be removed by prying off the lens and sliding out the bulb, then installing the new bulb. The door courtesy lights are in the front door trim panels, pry the lens out, pull down the light/lens assembly, remove the bulb, and install the new bulb. The rear reading lights require prying out the lens, removing the bulb, and installing the new bulb.