×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Chrysler 300 Oil Cooler
Engine Oil Cooler- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
10 Oil Coolers found
Chrysler 300 Engine Oil Filter Adapter
Part Number: 68365925AA$190.50 MSRP: $250.00You Save: $59.50 (24%)
Chrysler 300 Oil Cooler
The Oil Cooler in Chrysler 300 vehicles is responsible for allowable temperature of the engine oil which is vital in determining the performance as well as the durability of the Chrysler 300 vehicles' engine. These coolers are connected to the vehicle cooling system and use oil to water cooling system so that the oil warms up fast and does not overheat during rigorous use. Chrysler 300 models over the years have used different styles of Oil Coolers, which the main objective has been to improve on the cooling system. Nevertheless, in certain circumstances like while towing the car or driving the car in hot climatic conditions, the factory fitted Oil Cooler may not be adequate and this may lead to stalling of the cooler due to clogging or corrosion. A lot of potential is to be gained with the Chrysler 300 vehicles by getting an upgrade to the Oil Cooler kits which enhances the overall control on the oil temperature and in turn enhances the amount of time that both the oil and the engine lasts.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler 300 Oil Cooler at great affordable prices. Moreover, all genuine Chrysler 300 Oil Cooler come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Chrysler 300 Oil Cooler Parts Questions & Experts Answers
- Q: How to Replace an Oil Cooler on Chrysler 300?A: To replace the oil cooler, start by raising the front of the vehicle and supporting it securely on jack stands. Drain the cooling system and remove the engine oil filter. For installation, clean the mating surfaces and use a new gasket. Align the cutout on the cooler with the tab on the oil pan and tighten the bolt while holding the oil cooler to prevent it from turning. Finally, install a new oil filter, refill the cooling system, and check the oil level, adding as necessary.
