What is the routine preventive maintenance program for the battery on Chrysler Cirrus?

To ensure the vehicle starts reliably, one must maintain its battery. Remember to always disconnect the negative terminal first before servicing it. Also, the wheel well of the left front fender houses the battery. Use a wire brush and a warm water-baking soda solution to check for any case damage and clean the terminals and connections. Put on gloves and goggles for safety purposes. Replace cables with damages if any occur in them. To charge, remove the battery, check electrolyte level then connect charger leads to posts. Adjust charger settings to 12 volts and watch out for overheating signs. A hydrometer or voltmeter may determine how well a charge is placed. Basically, when fully charged, it has around 12.6 volts reading on it.

Genuine Chrysler Cirrus Car Batteries

Auto Battery

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Car Batteries found

View related parts
Chrysler Cirrus Terminal-Battery Terminal
Part Number: VU01205
$57.04 MSRP: $84.00
You Save: $26.96 (33%)
ADD TO CART
Product Specifications
- Other Name: Tray, Battery
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chrysler Cirrus | LX, LXi | 4 Cyl 2.0L, 4 Cyl 2.4L, 6 Cyl 2.5L
View related parts
Chrysler Cirrus Battery-Storage
Part Number: BAUNV75450
$51.74 MSRP: $74.70
You Save: $22.96 (31%)
ADD TO CART
Product Specifications
- Other Name: Tray Battery
- Replaces: UNV0075450
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chrysler Cirrus | LX, LXi | 4 Cyl 2.0L, 4 Cyl 2.4L, 6 Cyl 2.5L
View related parts
Chrysler Cirrus Battery-None
Part Number: BA075510EX
$184.99 MSRP: $220.00
You Save: $35.01 (16%)
ADD TO CART
Product Specifications
- Other Name: Tray Battery
- Replaced by: BB75F101AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chrysler Cirrus | LX, LXi | 4 Cyl 2.0L, 4 Cyl 2.4L, 6 Cyl 2.5L
View related parts
Chrysler Cirrus Terminal-Battery Terminal
Part Number: VU01207
Product Specifications
- Other Name: Tray, Battery
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chrysler Cirrus | LX, LXi | 4 Cyl 2.0L, 4 Cyl 2.4L, 6 Cyl 2.5L

Chrysler Cirrus Car Batteries

The Car Batteries of Chrysler Cirrus vehicle is used as an electrochemical energy storage system to supply electrical current as a starter and for ignition and injectors. They also operate certain parts when the engine is switched off and also retain functions such as the clock and memory of the wooing parts of the vehicle when it is not in use. Chrysler Cirrus has been using different types of batteries in the course of the years, like conventional flooded lead-acid (FLA), FLA maintenance-free, as well as AGM batteries. Certainly, FLA batteries demand frequent maintenance, while AGM batteries have benefits which included no-maintenance, low internal resistance, and higher robustness, making them perfect for tough environment. Such Car Batteries selection affects the power output delivery, durability, and ease of maintenance on Chrysler Cirrus vehicles to meet the electrical load in today's uses.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Cirrus Car Batteries at great affordable prices. Moreover, all genuine Chrysler Cirrus Car Batteries come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler Cirrus Car Batteries Parts Questions & Experts Answers

Battery-None
BA075510EX
Q: What is the routine preventive maintenance program for the battery on Chrysler Cirrus?
A: To ensure the vehicle starts reliably, one must maintain its battery. Remember to always disconnect the negative terminal first before servicing it. Also, the wheel well of the left front fender houses the battery. Use a wire brush and a warm water-baking soda solution to check for any case damage and clean the terminals and connections. Put on gloves and goggles for safety purposes. Replace cables with damages if any occur in them. To charge, remove the battery, check electrolyte level then connect charger leads to posts. Adjust charger settings to 12 volts and watch out for overheating signs. A hydrometer or voltmeter may determine how well a charge is placed. Basically, when fully charged, it has around 12.6 volts reading on it.