How do you remove and install the latch and lock cylinder from the trunk on Chrysler Cirrus?

To release the latch, one has to open the boot, next, unscrew the push-in fasteners that are used to hold the latch cover in place and then withdraw the cover. After that, the electrical connectors supplying the latch assembly has to be disconnected and the latch bolts have to be loosened in order to disengage the latch from the trunk. In installation, do the operation in reverse, while making sure that the lock cylinder linkage interacts perfectly with latch assembly. Below where the lock is installed there is a hole for the trunk latch and to remove the lock cylinder one has to take out the trunk latch, then using pliers remove the lock retaining clip and pull out the lock on the trunk lid. In the case of installation, then, one simply has to reverse the procedure described above for removal.

Genuine Chrysler Cirrus Trunk Lid Latch

Luggage Compartment Door Lock Assembly

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Trunk Lid Latches found

View related parts
Chrysler Cirrus Latch-DECKLID
Part Number: 4814033AB
$88.13 MSRP: $104.00
You Save: $15.87 (16%)
ADD TO CART
Product Specifications
- Other Name: Latch Decklid; Lock
- Replaced by: 4814033AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chrysler Cirrus | LXi | 4 Cyl 2.4L, 6 Cyl 2.5L
View related parts
Chrysler Cirrus Latch-DECKLID
Part Number: 4814034AC
$88.67 MSRP: $103.00
You Save: $14.33 (14%)
ADD TO CART
Product Specifications
- Other Name: Latch Decklid; Latch Assembly, Lock
- Replaces: 5012949AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Cirrus | LX, LXi | 4 Cyl 2.0L, 4 Cyl 2.4L, 6 Cyl 2.5L
View related parts
Chrysler Cirrus Latch-DECKLID
Part Number: 4814033AC
$89.66 MSRP: $104.00
You Save: $14.34 (14%)
ADD TO CART
Product Specifications
- Other Name: Latch Decklid; Latch Assembly, Lock
- Replaces: 4814033AB, 5012945AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2000 Chrysler Cirrus | LX, LXi | 4 Cyl 2.0L, 4 Cyl 2.4L, 6 Cyl 2.5L

Chrysler Cirrus Trunk Lid Latch

One of the parts of the Chrysler Cirrus is Trunk Lid Latch, which safely fixes the trunk lid so that the cargo does not shift during the movement. This one works in the manner of a seat belt in which in order to Unlock the mechanism it must be activated. Made of stainless steel the Chrysler Cirrus Trunk Lid Latch is designed to be strong and resistant from outside forces such as wind and hence any force exerted leads to it being locked to avoid anything falling out. Periodically the Trunk Lid Latch may wear out due to usage and it will have to be replaced so that it may serve its purpose effectively. Apart from closing and locking belongings a properly functioning Chrysler Cirrus Trunk Lid Latch also serves as a preventive measure for thieves, that help in protecting the items that one may have stored in the trunk. That is why this article describes several checks and adjustments, which should be performed periodically to make the Trunk Lid Latch functional.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Cirrus Trunk Lid Latch at great affordable prices. Moreover, all genuine Chrysler Cirrus Trunk Lid Latch come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler Cirrus Trunk Lid Latch Parts Questions & Experts Answers

Latch-DECKLID
4814033AB
Q: How do you remove and install the latch and lock cylinder from the trunk on Chrysler Cirrus?
A: To release the latch, one has to open the boot, next, unscrew the push-in fasteners that are used to hold the latch cover in place and then withdraw the cover. After that, the electrical connectors supplying the latch assembly has to be disconnected and the latch bolts have to be loosened in order to disengage the latch from the trunk. In installation, do the operation in reverse, while making sure that the lock cylinder linkage interacts perfectly with latch assembly. Below where the lock is installed there is a hole for the trunk latch and to remove the lock cylinder one has to take out the trunk latch, then using pliers remove the lock retaining clip and pull out the lock on the trunk lid. In the case of installation, then, one simply has to reverse the procedure described above for removal.