How do you disconnect the negative battery cable and remove the crankshaft pulley in 3.5L V6 engine on Chrysler Sebring?

Disconnect the negative battery cable from the remote ground terminal. Loosen the lug nuts on the right front wheel, raise the front of the vehicle, and support it securely on jackstands. Remove the right front wheel and inner fender liner. Remove the right engine mount. Remove the accessory drive belts. Connect an engine hoist to the engine and support it. Remove the lower crossmember. Lower the engine enough to position a large screwdriver through the crankshaft pulley to keep the crankshaft from turning, and remove the pulley-to-crankshaft bolt. Pull the crankshaft pulley off the crankshaft with a puller, ensuring the jaws of the puller only contact the hub of the pulley and not the outer ring. A spacer or long Allen-head bolt must be inserted into the crankshaft nose for the puller's tapered tip to push against, avoiding contact with the crankshaft itself. To install the crankshaft pulley, slide it onto the crankshaft as far as it will go, then use a vibration damper installation tool to press it onto the crankshaft. Install the crankshaft pulley retaining bolt and tighten it to the specified torque. The remainder of installation follows the reverse order of removal.

Genuine Chrysler Sebring Crankshaft Pulley

Crankshaft Pulley Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Crankshaft Pulleys found

View related parts
Chrysler Sebring DAMPER-CRANKSHAFT
Part Number: 2312425000
$251.46 MSRP: $379.00
You Save: $127.54 (34%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Sedan | 4 Cyl 2.4L
View related parts
Chrysler Sebring DAMPER-CRANKSHAFT
Part Number: 4892096AA
$138.63 MSRP: $208.00
You Save: $69.37 (34%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft; Crankshaft Pulley, Pulley
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan | 6 Cyl 2.7L
View related parts
Chrysler Sebring DAMPER-CRANKSHAFT
Part Number: 4792460AA
$90.19 MSRP: $114.77
You Save: $24.58 (22%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft; Crankshaft Pulley, Pulley, Vibration Damper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler Sebring | Base Convertible, Base Sedan, GTC Convertible, Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, LXi Convertible, LXi Sedan, Touring Convertible, Touring Sedan, TSI Sedan | 6 Cyl 2.7L
View related parts
Chrysler Sebring DAMPER-CRANKSHAFT
Part Number: 4892135AA
Product Specifications
- Other Name: DAMPER Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Sedan | 6 Cyl 3.5L
View related parts
Chrysler Sebring DAMPER-CRANKSHAFT
Part Number: 4667772
Product Specifications
- Other Name: DAMPER Crankshaft; Crankshaft Pulley, Pulley
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chrysler Sebring | LX | 4 Cyl 2.0L
View related parts
Chrysler Sebring DAMPER-Engine Vibration
Part Number: 4694268
Product Specifications
- Other Name: DAMPER Engine Vibration
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2004 Chrysler Sebring | Base Convertible, Base Sedan, GTC Convertible, JX, JXi, Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, LXi Sedan, Touring Sedan | 4 Cyl 2.0L, 4 Cyl 2.4L
View related parts
Chrysler Sebring DAMPER
Part Number: MD197613
Product Specifications
- Other Name: DAMPER Crankshaft; Crankshaft Pulley, Pulley
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chrysler Sebring | LX, LXi | 6 Cyl 2.5L
View related parts
Chrysler Sebring DAMPER-CRANKSHAFT DAMPER
Part Number: MD324796
Product Specifications
- Other Name: PULLEY Crankshaft; Crankshaft Pulley, Pulley, Vibration Damper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2000 Chrysler Sebring | JX, JXi | 6 Cyl 2.5L
View related parts
Chrysler Sebring DAMPER-CRANKSHAFT
Part Number: MD333325
Product Specifications
- Other Name: PULLEY Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | LX | 6 Cyl 3.0L
View related parts
Chrysler Sebring DAMPER-Vibration
Part Number: 68001304AA
Product Specifications
- Other Name: DAMPER Vibration
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Sebring | Limited Sedan, LX Sedan, Touring Sedan
View related parts
Chrysler Sebring DAMPER-CRANKSHAFT
Part Number: MD376056
Product Specifications
- Other Name: PULLEY Crankshaft; Crankshaft Pulley, Pulley
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2005 Chrysler Sebring | Base, LX | 4 Cyl 2.4L

Chrysler Sebring Crankshaft Pulley

The Performance Crankshaft Pulley on Chrysler Sebring vehicles plays an important part of directing crankshaft power to most parts like the power steering pump, A/C compressor and the alternator. Infact the Performance Crankshaft Pulley made the torque positioning direct from the crankshaft of the engine making it faster and efficient. Further, it operates to decrease vibration within the engine, thus providing balance during its operation. Chrysler Sebring in given years has had different form of Performance Crankshaft Pulley, all forms being ideal for performance and lightweight features. These differences could mean varied material and structure that affects its efficiency in distribution of power and reduction of vibration. The ability to push out an improved version of the Performance Crankshaft Pulley speaks volumes on the Chrysler Sebring's aim at enhancing performance as well as dependability of the Chrysler automobiles.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Sebring Crankshaft Pulley at great affordable prices. Moreover, all genuine Chrysler Sebring Crankshaft Pulley come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler Sebring Crankshaft Pulley Parts Questions & Experts Answers

DAMPER-CRANKSHAFT
4892096AA
Q: How do you disconnect the negative battery cable and remove the crankshaft pulley in 3.5L V6 engine on Chrysler Sebring?
A: Disconnect the negative battery cable from the remote ground terminal. Loosen the lug nuts on the right front wheel, raise the front of the vehicle, and support it securely on jackstands. Remove the right front wheel and inner fender liner. Remove the right engine mount. Remove the accessory drive belts. Connect an engine hoist to the engine and support it. Remove the lower crossmember. Lower the engine enough to position a large screwdriver through the crankshaft pulley to keep the crankshaft from turning, and remove the pulley-to-crankshaft bolt. Pull the crankshaft pulley off the crankshaft with a puller, ensuring the jaws of the puller only contact the hub of the pulley and not the outer ring. A spacer or long Allen-head bolt must be inserted into the crankshaft nose for the puller's tapered tip to push against, avoiding contact with the crankshaft itself. To install the crankshaft pulley, slide it onto the crankshaft as far as it will go, then use a vibration damper installation tool to press it onto the crankshaft. Install the crankshaft pulley retaining bolt and tighten it to the specified torque. The remainder of installation follows the reverse order of removal.