×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Chrysler Sebring Throttle Body
Fuel Injection Throttle Body- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
21 Throttle Bodies found
Chrysler Sebring Throttle Body Etc Unit
Part Number: 4861691AA$305.80 MSRP: $468.00You Save: $162.20 (35%)
Chrysler Sebring Fuel Throttle Body
Part Number: 4861694AA$305.80 MSRP: $468.00You Save: $162.20 (35%)
Chrysler Sebring Throttle Body Assembly
Part Number: 4669853$185.88 MSRP: $236.53You Save: $50.65 (22%)
| Page 1 of 2 |Next >
1-20 of 21 Results
Chrysler Sebring Throttle Body
Throttle Body in Chrysler Sebring car is important in controlling the amount of air that goes into the engine and therefore is closely connected with the fuel injection system. Located between the air cleaner and intake manifold it contains a butterfly value which opens/closes depending on accelerator pedal position. With this mechanism, the air intake is increased when the pedal is pressed and therefore signals the PCM to increase fuel supply. Chrysler Sebring line has changed from using conventional mechanical throttle to ETC or Electronic Throttle Control whereby the use of throttle sensors and electric motor is employed in the task. Bodies of older models may have incorporated a Throttle Body Injection or TBI while current models of Sebring automobiles may incorporate multi-port fuel injection systems. The efficiency of Throttle body can be reduced gradually by dust or debris accumulation, thus requiring cleaning or replacement of related parts such as TPS or IAC.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Sebring Throttle Body at great affordable prices. Moreover, all genuine Chrysler Sebring Throttle Body come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Chrysler Sebring Throttle Body Parts Questions & Experts Answers
- Q: How to Remove and Replace the Throttle Body on Chrysler Sebring?A: Disconnect the negative battery cable from the remote ground terminal or battery. Remove the engine cover. Detach the air intake duct or resonator, as applicable, from the throttle body. Disconnect the throttle body electrical connector. If equipped, remove the throttle body support bracket. Remove the throttle body mounting fasteners and detach the throttle body from the upper intake manifold. Remove the throttle body gasket and inspect it for cracks, tears, and deterioration. If it isn't in perfect condition, replace it. Make sure that the gasket mating surfaces of the throttle body and the intake manifold are clean. Installation is the reverse of removal. Tighten the throttle body bolts to the torque.
