How do you remove and install the crankshaft pulley on Dodge Caravan?

Before you attempt to pull the crankshaft pulley off, make sure you loose the cable from the negative terminal of the battery. You have to turn the lug nuts on the right front wheel to a few turns, then jack up the car, and put it on jackstands before you remove the right front wheel. Next pull out the passenger side inner fender splash shield and the serpentine drive belt. Take of the driveplate cover and with a large screwdriver engage the crankshaft in the position then get a helper to use a breaker bar and socket to pull the crankshaft pulley-to-crankshaft bolt. Very gingerly remove the crankshaft pulley with a two jaw puller carefully engaging the inner part of the pulley. Do not pull on the outer rim of the pulley as this may cause damage. There can be beefy in-between the puller bolt and the crankshaft due to some degree of recess of the pulley. During installation, use a://'screw-in tool which is screwed directly to the crankshaft in place of the crankshaft pulley bolt' Clean engine oil or multi-purpose grease shall be applied to the seal contact surface of the damper hub so that there will be no leakage of oil. The crankshaft pulley bolt with the washers as spacers can be used in case of the tool is not available and torque should not be more than the specified value. Last but not the least, re-attach the crankshaft pulley bolt and carry out the step by step reformation of the other parts in reverse method of the elimination phase.

Genuine Dodge Caravan Crankshaft Pulley

Crankshaft Pulley Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Crankshaft Pulleys found

View related parts
Dodge Caravan PULLEY-CRANKSHAFT Air Compressor D
Part Number: MD319994
$27.69 MSRP: $35.24
You Save: $7.55 (22%)
ADD TO CART
Product Specifications
- Other Name: PULLEY Crankshaft; Damper Pulley
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Dodge Caravan | Base, LE, SE | 6 Cyl 3.0L
View related parts
Dodge Caravan DAMPER-CRANKSHAFT
Part Number: MD354781
$190.59 MSRP: $220.00
You Save: $29.41 (14%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2000 Dodge Caravan | Base, LE, SE | 6 Cyl 3.0L
View related parts
Dodge Caravan DAMPER-CRANKSHAFT
Part Number: MD143435
Product Specifications
- Other Name: PULLEY, Crankshaft - Alternator Drive
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-2000 Dodge Caravan | Base, C/V (Long Wheel Base VAN) FWD, C/V (Short Wheel Base VAN) FWD, LE, LE FWD, SE, SE FWD | 6 Cyl 3.0L
View related parts
Dodge Caravan DAMPER-CRANKSHAFT
Part Number: 4448886
Product Specifications
- Other Name: DAMPER Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-2007 Dodge Caravan | Base, C/V, C/V (Long Wheel Base VAN) AWD, C/V (Long Wheel Base VAN) FWD, C/V (Short Wheel Base VAN) AWD, C/V (Short Wheel Base VAN) FWD, LE, LE AWD, LE FWD, SE, SE AWD, SE FWD, Sport, SXT | 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Dodge Caravan PULLEY Asm Drive
Part Number: 3870074
Product Specifications
- Other Name: PULLEY, Drive; Crankshaft Pulley, Idler Pulley, Pulley
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1984-1987 Dodge Caravan
View related parts
Dodge Caravan DAMPER-Engine Vibration
Part Number: 4694268
Product Specifications
- Other Name: DAMPER Engine Vibration
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2003 Dodge Caravan | Base, C/V, EC, LE, SE | 4 Cyl 2.4L
View related parts
Dodge Caravan PULLEY-V-Belt Drive
Part Number: 4483413
Product Specifications
- Other Name: PULLEY, Drive; Crankshaft Damper, Crankshaft Pulley, Pulley
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1989-1995 Dodge Caravan | Base, C/V (Long Wheel Base VAN) FWD, C/V (Short Wheel Base VAN) FWD, LE FWD, SE FWD | 4 Cyl 2.5L

Dodge Caravan Crankshaft Pulley

The Performance Crankshaft Pulley on Dodge Caravan vehicles plays a very important function of connecting the engine power to extras such as the power steering pump, A/C compressor, or the alternator. True torque can be obtained directly by the crankshaft pulley harness and reduces energy wastage thus making it a Performance Crankshaft Pulley. Also, it plays a role of an engine absorber by reducing vibrations making its operation smoother. Through the years, different types of Performance Crankshaft Pulley have been used on Dodge Caravan and each type is functioned to provide a good performance in its manner. These variations may be of the type that affects the weight and the design of the vehicle and the material that is used in making it, which have an effect on the response and authority of the vehicle. Lastly, the Performance Crankshaft Pulley is highly important to the functionality of the Dodge Caravan as it helps in dealing with power and to reduce vibrations.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Caravan Crankshaft Pulley at great affordable prices. Moreover, all genuine Dodge Caravan Crankshaft Pulley come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Caravan Crankshaft Pulley Parts Questions & Experts Answers

DAMPER-Engine Vibration
4694268
Q: How do you remove and install the crankshaft pulley on Dodge Caravan?
A: Before you attempt to pull the crankshaft pulley off, make sure you loose the cable from the negative terminal of the battery. You have to turn the lug nuts on the right front wheel to a few turns, then jack up the car, and put it on jackstands before you remove the right front wheel. Next pull out the passenger side inner fender splash shield and the serpentine drive belt. Take of the driveplate cover and with a large screwdriver engage the crankshaft in the position then get a helper to use a breaker bar and socket to pull the crankshaft pulley-to-crankshaft bolt. Very gingerly remove the crankshaft pulley with a two jaw puller carefully engaging the inner part of the pulley. Do not pull on the outer rim of the pulley as this may cause damage. There can be beefy in-between the puller bolt and the crankshaft due to some degree of recess of the pulley. During installation, use a://'screw-in tool which is screwed directly to the crankshaft in place of the crankshaft pulley bolt' Clean engine oil or multi-purpose grease shall be applied to the seal contact surface of the damper hub so that there will be no leakage of oil. The crankshaft pulley bolt with the washers as spacers can be used in case of the tool is not available and torque should not be more than the specified value. Last but not the least, re-attach the crankshaft pulley bolt and carry out the step by step reformation of the other parts in reverse method of the elimination phase.