×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Dodge Caravan Parking Brake Shoe
Emergency Parking Brake Shoe- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Parking Brake Shoes found
Dodge Caravan Parking Brake Shoe And Lining Kit
Part Number: 5019802AA$155.89 MSRP: $199.00You Save: $43.11 (22%)
Dodge Caravan Parking Brake Shoe
Parking Brake Shoe in Dodge Caravan delivers a vital function of holding the wheels whenever the car is parked. Its main operation is use in creating friction when the brake lining abuts against the drum wall thus immobilizing the wheels when the parking brake is applied. There have been different types of Parking Brake Shoe used in Dodge Caravan over the years and they have changes in a bid to make the parking brake better. Some of the differences between these types may be in the material or structure, this means that they may vary in how they function as well as their lifetimes.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Caravan Parking Brake Shoe at great affordable prices. Moreover, all genuine Dodge Caravan Parking Brake Shoe come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Caravan Parking Brake Shoe Parts Questions & Experts Answers
- Q: How to replace the parking brake shoes on the rear wheels on Dodge Caravan?A: Loosen the rear wheel lug nuts, raise the rear of the vehicle, and support it securely on jackstands. Block the front wheels and remove the rear wheels. Release the parking brake. Remove the rear calipers. Support the caliper assemblies with a coat hanger or heavy wire and don't disconnect the Brake Line from the caliper. Remove the rear discs. Remove the rear hub and bearing assemblies. Clean the parking brake assembly with brake system cleaner. Replace the parking brake shoes. Clean the backing plate, then apply a thin coat of high-temperature grease to the shoe contact points on the backing plate. Clean and lubricate the threads of the adjuster screw assembly. Mount the trailing shoe on the backing plate, making sure the notch in the shoe engages with the actuator lever, and secure the shoe with the hold-down spring and pin. Connect the upper return springs to the top of the trailing shoe and to the top of the leading shoe. Place the leading shoe in position and secure the shoe with the hold-down spring and pin. Install the lower return spring. Spread the shoes apart and install the adjuster screw assembly. Inspect the drum surface inside the disc for score marks, deep grooves, hard spots, and cracks. If the disc/drum is worn, scored, or out of round, it will have to be resurfaced by an automotive machine shop or replaced. Install the hub and bearing assemblies. Install the disc/drum over the shoes. Using a screwdriver, turn the star wheel on the parking brake shoe adjuster until the shoes slightly drag as the disc is turned, then back off the adjuster until the shoes don't drag. Install the caliper. Repeat this sequence on the parking brake shoes for the other rear wheel.
