How to Install a Receiver-Drier in an Automotive Air Conditioning System on Dodge Challenger?

To begin, have an automotive air conditioning technician discharge the air conditioning system. Then, disconnect the cable from the negative battery terminal, making sure to disconnect the Intelligent Battery Sensor (IBS) connector first if applicable. Next, remove the front bumper cover and the A/C accumulator mounting fastener. Pull the A/C accumulator out of the condenser fitting, removing and discarding the O-ring seals. Plug all open fittings to prevent dirt and moisture from entering. Install the A/C accumulator back into the condenser fitting using new O-ring seals. If a new A/C accumulator is being installed, add 1 oz (30 ml) of new refrigerant oil to it. Finally, complete the installation by reversing the removal process. Once finished, take the vehicle to a shop to have the air conditioning system evacuated, charged, and leak tested.

Genuine Dodge Challenger A/C Accumulator

Accumulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 A/C Accumulator found

View related parts
Dodge Challenger DRIER-Receiver
Part Number: 5170744AA
$121.82 MSRP: $184.00
You Save: $62.18 (34%)
ADD TO CART
Product Specifications
- Other Name: DRIER Receiver; Dehydrator, Drier
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Challenger | GT AWD, GT RWD, R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SRT 392, SRT 392 RWD, SRT Demon RWD, SRT Hellcat, SRT Hellcat RWD, SXT, SXT AWD, SXT Plus, SXT RWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
- 2012-2013 Dodge Challenger | R/T, SE, SRT8, SRT8 Core | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.4L

Dodge Challenger A/C Accumulator

The A/C Accumulator in Dodge Challenger automobiles is important and acts as a major part of the cooling system. This cylinder shaped equipment is located between the evaporator and the compressor and functions to remove moisture and oil together with other foreign particles from the system. Since the described impurities can negatively influence the operation of Dodge Challenger A/C system, the A/C Accumulator meets the goal of acting as a protection gear of sorts that helps enhance the performance and productivity of the air conditioning system in these vehicles. Needless to say, over the years of Dodge Challenger production, various types of A/C Accumulators were employed and they all served the basic purpose of ensuring that the car's A/C system was clean.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Challenger A/C Accumulator at great affordable prices. Moreover, all genuine Dodge Challenger A/C Accumulator come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Challenger A/C Accumulator Parts Questions & Experts Answers

DRIER-Receiver
5170744AA
Q: How to Install a Receiver-Drier in an Automotive Air Conditioning System on Dodge Challenger?
A: To begin, have an automotive air conditioning technician discharge the air conditioning system. Then, disconnect the cable from the negative battery terminal, making sure to disconnect the Intelligent Battery Sensor (IBS) connector first if applicable. Next, remove the front bumper cover and the A/C accumulator mounting fastener. Pull the A/C accumulator out of the condenser fitting, removing and discarding the O-ring seals. Plug all open fittings to prevent dirt and moisture from entering. Install the A/C accumulator back into the condenser fitting using new O-ring seals. If a new A/C accumulator is being installed, add 1 oz (30 ml) of new refrigerant oil to it. Finally, complete the installation by reversing the removal process. Once finished, take the vehicle to a shop to have the air conditioning system evacuated, charged, and leak tested.