How do you remove and install the brake light switch on Dodge Challenger?

Detach the lower instrument panel insulator at the knee bolster side of the car on the driver side. This switch provides a signal to the electronic module through the SAE J1930 interface circuit when the brake pedal is depressed, and it is fixed to a bracket welded to the brake pedal. Compress the brake pedal and turn the switch 30 degrees in the anticlockwise direction and pull it out from the housing. Pull off the electrical connector of the brake light switch. There is a switch, which can be installed by pulling the plunger of the switch out as far as it will go. Press the brake pedal down as far as its possible and then fix the switch in its respective bracket in the way it was unstowed. Take your foot off the brake pedal and then apply some pressure upwards on the pedal to make sure that the brake has been released. Rsult only switch at this point is now fully adjusted and in place.

Genuine Dodge Challenger Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Light Switches found

View related parts
Dodge Challenger Switch-Stop Lamp
Part Number: 4671336AD
$24.26 MSRP: $33.25
You Save: $8.99 (28%)
ADD TO CART
Product Specifications
- Other Name: Switch Stop Lamp
- Replaces: 4671336, 4671336AC, 4671336AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2014 Dodge Challenger | R/T, SE, SRT, SRT Core, SRT8, SRT8 Core | 6 Cyl 3.5L, 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.1L, 8 Cyl 6.4L
View related parts
Dodge Challenger Switch-Stop Lamp
Part Number: 4671336AB
$22.37 MSRP: $33.25
You Save: $10.88 (33%)
ADD TO CART
Product Specifications
- Other Name: Switch Stop Lamp
- Replaced by: 4671336AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2012 Dodge Challenger | R/T, SE, SRT8 | 6 Cyl 3.5L, 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.1L, 8 Cyl 6.4L
View related parts
Dodge Challenger Switch-Stop Lamp
Part Number: 4671336AC
$22.37 MSRP: $33.25
You Save: $10.88 (33%)
ADD TO CART
Product Specifications
- Other Name: Switch Stop Lamp
- Replaced by: 4671336AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013 Dodge Challenger | R/T, SE, SRT8, SRT8 Core | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.4L
View related parts
Dodge Challenger Sensor-Brake Pedal
Part Number: 56038969AC
$24.92 MSRP: $36.60
You Save: $11.68 (32%)
ADD TO CART
Product Specifications
- Other Name: Stoplamp Switch
- Replaces: 56038969AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2022 Dodge Challenger | GT AWD, GT RWD, R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SRT 392, SRT 392 RWD, SRT Demon RWD, SRT Hellcat, SRT Hellcat RWD, SXT, SXT AWD, SXT Plus, SXT RWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L

Dodge Challenger Brake Light Switch

Dodge Challenger Brake Light Switch helps in switching On the brake lights when the brake pedal is depressed. This mechanism make the drivers behind the Dodge Challenger aware when the car is in the process of slowing down or coming to stand still which increases the safety of the road. While the overview does not specify different types or styles of Brake Light Switch used in various Dodge Challenger models, it is essential to note that the primary goal remains consistent across all iterations: in order to secure adequate signaling of braking actions. This means that the Brake Light Switch is fundamental in the provision of information to other motorists thus enhancing their safety on the roads.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Challenger Brake Light Switch at great affordable prices. Moreover, all genuine Dodge Challenger Brake Light Switch come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Challenger Brake Light Switch Parts Questions & Experts Answers

Switch-Stop Lamp
4671336AB
Q: How do you remove and install the brake light switch on Dodge Challenger?
A: Detach the lower instrument panel insulator at the knee bolster side of the car on the driver side. This switch provides a signal to the electronic module through the SAE J1930 interface circuit when the brake pedal is depressed, and it is fixed to a bracket welded to the brake pedal. Compress the brake pedal and turn the switch 30 degrees in the anticlockwise direction and pull it out from the housing. Pull off the electrical connector of the brake light switch. There is a switch, which can be installed by pulling the plunger of the switch out as far as it will go. Press the brake pedal down as far as its possible and then fix the switch in its respective bracket in the way it was unstowed. Take your foot off the brake pedal and then apply some pressure upwards on the pedal to make sure that the brake has been released. Rsult only switch at this point is now fully adjusted and in place.