How to disconnect the battery and remove the crankshaft pulley in 2.7L V6 engine on Dodge Challenger?

Disconnect the cable from the negative terminal of the battery. Remove the upper radiator crossmember, the cooling fan assembly, and the radiator. Take off the engine splash shield. Remove the drivebelts and position the belt tensioner away from the crankshaft pulley. Use a strap wrench around the crankshaft pulley to hold it while using a breaker bar and socket to remove the crankshaft pulley center bolt; a chain-type wrench may be used if an old drivebelt or rag is wrapped around the crankshaft pulley first. Pull the damper off the crankshaft with a puller, ensuring the puller jaws contact only the hub of the pulley and not the outer ring. A spacer should be placed against the end of the crankshaft nose or a long Allen-head bolt should be inserted into the crankshaft nose for the puller's tapered tip to push against, preventing damage to the crankshaft threads. Check the surface on the pulley hub that the oil seal rides on; if it has been grooved, a press-on sleeve may be available to renew the sealing surface, which can be pressed into place with a hammer and a block of wood. Lubricate the pulley hub with clean engine oil and reinstall the crankshaft pulley using a vibration damper installation tool to press it onto the crankshaft. Install the crankshaft pulley retaining bolt and tighten it to the specified torque. The remainder of the installation follows the reverse order of removal.

Genuine Dodge Challenger Crankshaft Pulley

Crankshaft Pulley Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Crankshaft Pulleys found

View related parts
Dodge Challenger DAMPER-CRANKSHAFT
Part Number: 5184293AH
$158.76 MSRP: $241.00
You Save: $82.24 (35%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
- Replaces: 5184293AC, 5184293AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Challenger | GT AWD, GT RWD, R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SE, SRT, SRT 392, SRT 392 RWD, SRT Core, SRT Hellcat RWD, SRT8, SRT8 Core, SXT, SXT AWD, SXT Plus, SXT RWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger DAMPER-CRANKSHAFT
Part Number: 53022413AA
$229.11 MSRP: $344.00
You Save: $114.89 (34%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft; Crankshaft Damper, Vibration Damper
- Replaces: 53022334AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Challenger | R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SRT, SRT 392, SRT 392 RWD, SRT Core, SRT Hellcat RWD, SRT8, SRT8 Core, SXT, SXT Plus | 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger DAMPER-CRANKSHAFT
Part Number: 53010831AD
$323.40 MSRP: $496.00
You Save: $172.60 (35%)
ADD TO CART
Product Specifications
- Other Name: Crankshaft Damper, Vibration Damper
- Replaces: 5038731AE, 5038731AG, 53010831AB, 53010831AC, 5038731AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Challenger | R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SRT 392, SRT 392 RWD, SRT Demon RWD, SRT Hellcat, SRT Hellcat RWD, SXT, SXT Plus | 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger DAMPER-CRANKSHAFT
Part Number: 5038473AA
$305.80 MSRP: $468.00
You Save: $162.20 (35%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft; Crankshaft Damper, Vibration Damper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Challenger | R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SRT, SRT 392, SRT 392 RWD, SRT Core, SRT Hellcat RWD, SRT8, SRT8 Core, SXT, SXT Plus | 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Challenger DAMPER-CRANKSHAFT
Part Number: 5184293AC
$158.76 MSRP: $241.00
You Save: $82.24 (35%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
- Replaced by: 5184293AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2012 Dodge Challenger | R/T, SE, SRT8 | 6 Cyl 3.6L
View related parts
Dodge Challenger DAMPER-CRANKSHAFT
Part Number: 5184293AG
$158.76 MSRP: $241.00
You Save: $82.24 (35%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
- Replaced by: 5184293AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2015 Dodge Challenger | R/T, R/T Scat Pack, SE, SRT, SRT 392, SRT Core, SRT8, SRT8 Core, SXT, SXT Plus | 6 Cyl 3.6L
View related parts
Dodge Challenger DAMPER-CRANKSHAFT
Part Number: 5038731AE
$323.40 MSRP: $496.00
You Save: $172.60 (35%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
- Replaced by: 53010831AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2016 Dodge Challenger | R/T, R/T Scat Pack, SRT 392, SRT Hellcat, SXT, SXT Plus | 8 Cyl 6.2L
View related parts
Dodge Challenger DAMPER-CRANKSHAFT
Part Number: 5038731AF
$323.40 MSRP: $496.00
You Save: $172.60 (35%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
- Replaced by: 53010831AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017 Dodge Challenger | R/T 392 RWD, R/T RWD, SRT 392 RWD, SRT Hellcat RWD | 8 Cyl 6.2L
View related parts
Dodge Challenger DAMPER-CRANKSHAFT
Part Number: 5038731AG
$323.40 MSRP: $496.00
You Save: $172.60 (35%)
ADD TO CART
Product Specifications
- Replaced by: 53010831AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018 Dodge Challenger | R/T 392 RWD, R/T RWD, SRT 392 RWD, SRT Demon RWD, SRT Hellcat RWD | 8 Cyl 6.2L
View related parts
Dodge Challenger DAMPER-CRANKSHAFT
Part Number: 53010831AB
$323.40 MSRP: $496.00
You Save: $172.60 (35%)
ADD TO CART
Product Specifications
- Replaced by: 53010831AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018 Dodge Challenger | R/T 392 RWD, R/T RWD, SRT 392 RWD, SRT Demon RWD, SRT Hellcat RWD | 8 Cyl 6.2L
View related parts
Dodge Challenger DAMPER-CRANKSHAFT
Part Number: 5037394AA
Product Specifications
- Other Name: DAMPER Crankshaft; Crankshaft Damper, Pulley, Vibration Damper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Challenger | R/T, SRT8 | 8 Cyl 6.1L
View related parts
Dodge Challenger DAMPER-Vibration
Part Number: 53022412AA
Product Specifications
- Other Name: DAMPER Vibration; Crankshaft Damper, Pulley, Vibration Damper
- Replaces: 53022084AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Challenger | R/T | 8 Cyl 5.7L
View related parts
Dodge Challenger DAMPER-CRANKSHAFT
Part Number: 4792811AB
Product Specifications
- Other Name: DAMPER Crankshaft; Crankshaft Damper, Pulley, Vibration Damper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Challenger | R/T, SE | 6 Cyl 3.5L
View related parts
Dodge Challenger DAMPER-Vibration
Part Number: 53022084AA
Product Specifications
- Other Name: DAMPER Vibration
- Replaced by: 53022412AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Challenger | R/T | 8 Cyl 5.7L

Dodge Challenger Crankshaft Pulley

The Performance Crankshaft Pulley in Dodge Challenger cars plays an overwhelming role in transmitting energy and torque so efficiently from the engine to other components like the power steering pump, the A/C compressor besides the alternator. The Performance Crankshaft Pulley takes power directly from the crankshaft of the engine and thus boosts the engines capacity and performance, another name for it therefore is the harmonic balance wheel in the sense that it helps reduce vibrations. Several Performance Crankshaft Pulley designs have been used in Dodge Challenger for years, and all these styles have been oriented to the maximum power supply and effective engine operation. These pulleys may have variation in their way of construction and design, and hence may not be very efficient in lessening the vibration of the engine and hence the performances. The changes of the Performance Crankshaft Pulley are a characteristic of innovations in engineering, which sought the optimal for the functionality of the Dodge Challenger in the streets.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Challenger Crankshaft Pulley at great affordable prices. Moreover, all genuine Dodge Challenger Crankshaft Pulley come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Challenger Crankshaft Pulley Parts Questions & Experts Answers

DAMPER-CRANKSHAFT
53022413AA
Q: How to disconnect the battery and remove the crankshaft pulley in 2.7L V6 engine on Dodge Challenger?
A: Disconnect the cable from the negative terminal of the battery. Remove the upper radiator crossmember, the cooling fan assembly, and the radiator. Take off the engine splash shield. Remove the drivebelts and position the belt tensioner away from the crankshaft pulley. Use a strap wrench around the crankshaft pulley to hold it while using a breaker bar and socket to remove the crankshaft pulley center bolt; a chain-type wrench may be used if an old drivebelt or rag is wrapped around the crankshaft pulley first. Pull the damper off the crankshaft with a puller, ensuring the puller jaws contact only the hub of the pulley and not the outer ring. A spacer should be placed against the end of the crankshaft nose or a long Allen-head bolt should be inserted into the crankshaft nose for the puller's tapered tip to push against, preventing damage to the crankshaft threads. Check the surface on the pulley hub that the oil seal rides on; if it has been grooved, a press-on sleeve may be available to renew the sealing surface, which can be pressed into place with a hammer and a block of wood. Lubricate the pulley hub with clean engine oil and reinstall the crankshaft pulley using a vibration damper installation tool to press it onto the crankshaft. Install the crankshaft pulley retaining bolt and tighten it to the specified torque. The remainder of the installation follows the reverse order of removal.