How to remove and install a door latch,Door Lock Cylinder and outside door handle on Dodge Charger?

Raise the window completely and remove the door trim panel and water shield. Remove the door speaker. Remove the fasteners at the rear glass run channel and move the channel away from the latch (Remove the fasteners securing the pull cup bracket). This provides a little extra working room in the latch area inside the door. Rotate the plastic retaining clips off the rods, then detach the latch links. Disconnect the electrical connector. Remove the three mounting screws (it may be necessary to use an impact-type screwdriver to loosen them), then remove the latch from the door ( Remove the latch mounting screws). Place the latch in position and install the screws. Tighten the screws securely. Connect the link rods and electrical connector to the latch. The remainder of installation is the reverse of removal. Remove the outside door handle. Withdraw the lock cylinder from the door handle. Installation is the reverse of removal. Remove the door trim panel. Remove the door speaker. Remove the fasteners at the rear glass run channel and move the channel away from the latch. This provides a little extra working room in the latch area inside the door. Disconnect the link rods from the outside handle, remove the mounting fasteners and carefully detach the handle from the door. Place the handle in position, attach the link and install the nuts. Tighten the fasteners securely. The remainder of installation is the reverse of removal.

Genuine Dodge Charger Door Handle

Inside Door Handle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

478 Door Handles found

View related parts
Dodge Charger Handle-Front Door Exterior
Part Number: 1MZ84DX8AJ
$101.21 MSRP: $209.00
You Save: $107.79 (52%)
ADD TO CART
Product Specifications
- Other Name: Handle Front Door Exterior
- Replaced by: 1MZ84DX8AM
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2019 Dodge Charger | GT AWD, GT RWD, Police AWD, Police RWD, R/T 392 RWD, R/T RWD, Scat Pack RWD, SE AWD, SE RWD, SRT 392 RWD, SRT Hellcat RWD, SXT AWD, SXT Plus RWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Dodge Charger Handle-Front Door Exterior
Part Number: 1MZ84KBXAJ
$143.26 MSRP: $213.00
You Save: $69.74 (33%)
ADD TO CART
Product Specifications
- Other Name: Handle Front Door Exterior
- Replaced by: 1MZ84KBXAM
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2018 Dodge Charger | GT AWD, Police AWD, Police RWD, R/T 392 RWD, R/T RWD, SE AWD, SE RWD, SRT 392 RWD, SRT Hellcat RWD, SXT AWD, SXT Plus RWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Dodge Charger Handle-Front Door Exterior
Part Number: 1MZ85DX8AM
$132.99 MSRP: $199.00
You Save: $66.01 (34%)
ADD TO CART
Product Specifications
- Other Name: Outside Handle
- Position: Front
- Replaces: 1MZ85DX8AF, 1MZ85DX8AE, 1MZ85DX8AI, 1MZ85DX8AJ, 1MZ85DX8AH, 1MZ85DX8AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Charger | GT AWD, GT RWD, Police AWD, Police RWD, R/T 392 RWD, R/T AWD, R/T RWD, SE AWD, SE RWD, SRT 392 RWD, SRT Hellcat RWD, SRT Hellcat Widebody RWD, SRT RWD, SRT Superbee RWD, SRT8 RWD, SRT8 Superbee RWD, SXT AWD, SXT Plus RWD, SXT RWD, Scat Pack RWD, V6 AWD | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Charger Bracket-Door Handle
Part Number: 68060188AL
$30.47 MSRP: $44.80
You Save: $14.33 (32%)
ADD TO CART
Product Specifications
- Other Name: Handle Outside Bracket
- Position: Passenger Side
- Replaces: 68060188AF, 68060188AD, 68060188AG, 68060188AE, 68060188AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Charger | GT AWD, GT RWD, Police AWD, Police RWD, R/T 392 RWD, R/T AWD, R/T RWD, SE AWD, SE RWD, SRT 392 RWD, SRT Hellcat RWD, SRT Hellcat Widebody RWD, SRT RWD, SRT Superbee RWD, SRT8 RWD, SRT8 Superbee RWD, SXT AWD, SXT Plus RWD, SXT RWD, Scat Pack RWD, V6 AWD | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Charger Handle-Front Door Exterior
Part Number: 1MZ84DX8AM
$139.70 MSRP: $209.00
You Save: $69.30 (34%)
ADD TO CART
Product Specifications
- Other Name: Outside Handle
- Position: Front
- Replaces: 1MZ84DX8AF, 1MZ84DX8AG, 1MZ84DX8AE, 1MZ84DX8AH, 1MZ84DX8AI, 1MZ84DX8AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Charger | GT AWD, GT RWD, Police AWD, Police RWD, R/T 392 RWD, R/T AWD, R/T RWD, SE AWD, SE RWD, SRT 392 RWD, SRT Hellcat RWD, SRT Hellcat Widebody RWD, SRT RWD, SRT Superbee RWD, SRT8 RWD, SRT8 Superbee RWD, SXT AWD, SXT Plus RWD, SXT RWD, Scat Pack RWD, V6 AWD | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Charger Handle-Front Door Exterior
Part Number: 1MZ84GW7AF
$148.02 MSRP: $174.00
You Save: $25.98 (15%)
ADD TO CART
Product Specifications
- Other Name: Handle Front Door Exterior; Outside Handle
- Position: Passenger Side
- Replaced by: 1MZ84GW7AM
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2012 Dodge Charger | Police RWD, R/T AWD, R/T RWD, SE RWD, SRT8 RWD, SRT8 Superbee RWD, SXT AWD, SXT RWD, V6 AWD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.4L
View related parts
Dodge Charger Handle-Front Door Exterior
Part Number: 1MZ85JSCAH
$125.22 MSRP: $188.00
You Save: $62.78 (34%)
ADD TO CART
Product Specifications
- Other Name: Handle Front Door Exterior
- Replaced by: 1MZ85JSCAM
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2016 Dodge Charger | Police AWD, Police RWD, R/T RWD, Scat Pack RWD, SE AWD, SE RWD, SRT 392 RWD, SRT Hellcat RWD, SRT RWD, SXT AWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Dodge Charger Handle-Exterior Door
Part Number: 1MZ81DX8AH
$100.64 MSRP: $151.00
You Save: $50.36 (34%)
ADD TO CART
Product Specifications
- Other Name: Outside Handle
- Position: Driver Side
- Replaces: 1MZ81DX8AF, 1MZ81DX8AG, 1MZ81DX8AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2023 Dodge Charger | GT AWD, GT RWD, Police AWD, Police RWD, R/T 392 RWD, R/T AWD, R/T RWD, SE AWD, SE RWD, SRT 392 RWD, SRT Hellcat RWD, SRT Hellcat Widebody RWD, SRT RWD, SRT Superbee RWD, SRT8 RWD, SRT8 Superbee RWD, SXT AWD, SXT Plus RWD, SXT RWD, Scat Pack RWD, V6 AWD | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Charger Handle-Front Door Exterior
Part Number: 1MZ85JSCAJ
$125.22 MSRP: $188.00
You Save: $62.78 (34%)
ADD TO CART
Product Specifications
- Other Name: Handle Front Door Exterior
- Position: Front
- Replaced by: 1MZ85JSCAM
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2019 Dodge Charger | GT AWD, GT RWD, Police AWD, Police RWD, R/T 392 RWD, R/T RWD, Scat Pack RWD, SE AWD, SE RWD, SRT 392 RWD, SRT Hellcat RWD, SXT AWD, SXT Plus RWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Dodge Charger Handle-Front Door Exterior
Part Number: 1MZ84PDNAJ
$80.24 MSRP: $167.00
You Save: $86.76 (52%)
ADD TO CART
Product Specifications
- Other Name: Handle Front Door Exterior
- Position: Front
- Replaced by: 1MZ84PDNAM
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2019 Dodge Charger | GT AWD, GT RWD, Police AWD, Police RWD, R/T 392 RWD, R/T RWD, Scat Pack RWD, SE AWD, SE RWD, SRT 392 RWD, SRT Hellcat RWD, SXT AWD, SXT Plus RWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Dodge Charger Handle-Front Door Exterior
Part Number: 1MZ84DX8AH
$101.21 MSRP: $209.00
You Save: $107.79 (52%)
ADD TO CART
Product Specifications
- Other Name: Handle Front Door Exterior
- Replaced by: 1MZ84DX8AM
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016 Dodge Charger | Police AWD, Police RWD, R/T RWD, Scat Pack RWD, SE AWD, SE RWD, SRT 392 RWD, SRT Hellcat RWD, SXT AWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Dodge Charger Handle-Front Door Exterior
Part Number: 1MZ84KBXAG
$102.82 MSRP: $213.00
You Save: $110.18 (52%)
ADD TO CART
Product Specifications
- Other Name: Handle Front Door Exterior
- Replaced by: 1MZ84KBXAM
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2015 Dodge Charger | Police AWD, Police RWD, R/T AWD, R/T RWD, Scat Pack RWD, SE AWD, SE RWD, SRT Hellcat RWD, SRT RWD, SRT Superbee RWD, SRT8 RWD, SRT8 Superbee RWD, SXT AWD, SXT RWD, V6 AWD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Dodge Charger Handle-Front Door Exterior
Part Number: 1MZ84KBXAH
$102.82 MSRP: $213.00
You Save: $110.18 (52%)
ADD TO CART
Product Specifications
- Other Name: Handle Front Door Exterior
- Position: Front
- Replaced by: 1MZ84KBXAM
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016 Dodge Charger | Police AWD, Police RWD, R/T RWD, Scat Pack RWD, SE AWD, SE RWD, SRT 392 RWD, SRT Hellcat RWD, SXT AWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Dodge Charger Handle-Front Door Exterior
Part Number: 1MZ85SBMAJ
$89.96 MSRP: $188.00
You Save: $98.04 (53%)
ADD TO CART
Product Specifications
- Position: Front
- Replaced by: 1MZ85SBMAM
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2019 Dodge Charger | GT AWD, GT RWD, Police AWD, Police RWD, R/T 392 RWD, R/T RWD, Scat Pack RWD, SRT 392 RWD, SRT Hellcat RWD, SXT AWD, SXT Plus RWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Dodge Charger Handle-Exterior Door
Part Number: 1MZ81FQDAH
$84.05 MSRP: $127.00
You Save: $42.95 (34%)
ADD TO CART
Product Specifications
- Replaces: 1MZ81FQDAG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2019-2020 Dodge Charger | GT AWD, GT RWD, Police AWD, Police RWD, R/T RWD, SRT Hellcat RWD, SRT Hellcat Widebody RWD, SXT AWD, SXT RWD, Scat Pack RWD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
- 2015-2017 Dodge Charger | Police AWD, Police RWD, R/T 392 RWD, R/T RWD, SE AWD, SE RWD, SRT 392 RWD, SRT Hellcat RWD, SRT RWD, SXT AWD, SXT RWD, Scat Pack RWD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Dodge Charger Handle-Front Door Exterior
Part Number: 1MZ84VECAM
$106.34 MSRP: $160.00
You Save: $53.66 (34%)
ADD TO CART
Product Specifications
- Other Name: Outside Handle
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020 Dodge Charger | GT AWD, GT RWD, Police AWD, Police RWD, R/T RWD, Scat Pack RWD, SRT Hellcat Widebody RWD, SXT AWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Dodge Charger Handle-Front Door Exterior
Part Number: 1MZ84PDNAM
$111.65 MSRP: $167.00
You Save: $55.35 (34%)
ADD TO CART
Product Specifications
- Other Name: Outside Handle
- Position: Front
- Replaces: 1MZ84PDNAJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2023 Dodge Charger | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
- 2017-2019 Dodge Charger | GT AWD, GT RWD, Police AWD, Police RWD, R/T 392 RWD, R/T RWD, SE AWD, SE RWD, SRT 392 RWD, SRT Hellcat RWD, SXT AWD, SXT Plus RWD, SXT RWD, Scat Pack RWD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Dodge Charger Handle-Front Door Exterior
Part Number: 1MZ85JSCAM
$125.22 MSRP: $188.00
You Save: $62.78 (34%)
ADD TO CART
Product Specifications
- Other Name: Outside Handle
- Position: Front
- Replaces: 1MZ85JSCAG, 1MZ85JSCAH, 1MZ85JSCAE, 1MZ85JSCAI, 1MZ85JSCAJ, 1MZ85JSCAD, 1MZ85JSCAF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2023 Dodge Charger | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
- 2013-2019 Dodge Charger | GT AWD, GT RWD, Police AWD, Police RWD, R/T 392 RWD, R/T AWD, R/T RWD, SE AWD, SE RWD, SRT 392 RWD, SRT Hellcat RWD, SRT RWD, SRT Superbee RWD, SRT8 RWD, SRT8 Superbee RWD, SXT AWD, SXT Plus RWD, SXT RWD, Scat Pack RWD, V6 AWD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
- 2011 Dodge Charger | Police RWD, R/T AWD, R/T RWD, SE RWD | 6 Cyl 3.6L, 8 Cyl 5.7L
View More
View related parts
Dodge Charger Handle-Front Door Exterior
Part Number: 1MZ85SBMAM
$125.17 MSRP: $188.00
You Save: $62.83 (34%)
ADD TO CART
Product Specifications
- Other Name: Outside Handle
- Position: Driver Side
- Replaces: 1MZ85SBMAJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2023 Dodge Charger | GT AWD, GT RWD, Police AWD, Police RWD, R/T 392 RWD, R/T RWD, SRT 392 RWD, SRT Hellcat RWD, SRT Hellcat Widebody RWD, SXT AWD, SXT Plus RWD, SXT RWD, Scat Pack RWD | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Charger Handle-Front Door Exterior
Part Number: 1MZ85ZR3AM
$135.23 MSRP: $203.00
You Save: $67.77 (34%)
ADD TO CART
Product Specifications
- Other Name: Outside Handle
- Position: Driver Side
- Replaces: 1MZ85ZR3AF, 1MZ85ZR3AE, 1MZ85ZR3AI, 1MZ85ZR3AG, 1MZ85ZR3AJ, 1MZ85ZR3AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2023 Dodge Charger | GT AWD, GT RWD, Police AWD, Police RWD, R/T 392 RWD, R/T AWD, R/T RWD, SE AWD, SE RWD, SRT 392 RWD, SRT Hellcat RWD, SRT Hellcat Widebody RWD, SRT RWD, SRT Superbee RWD, SRT8 RWD, SRT8 Superbee RWD, SXT AWD, SXT Plus RWD, SXT RWD, Scat Pack RWD, V6 AWD | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L

| Page 1 of 24 |Next >

1-20 of 478 Results

Dodge Charger Door Handle

Inasmuch as the Interior Door Handle of the Dodge Charger possesses aesthetic features, it also plays an important role of enabling occupants to open the car doors from the inside thus enabling them to get out easily. This is a small handle by which the door is opened, whereby a hook is pushed off the latch as the case with the outer handle. Eventually, Interior Door Handle becomes fragile in the Dodge Charger especially the handle on the driver side due to daily use that can make the handle develop scratches that affect the general appearance of the interior part of the Charger. Interior Door Handles are available in different techniques within Dodge Charger, yet styles are not specified. The primary risk therefore is malfunction which may be attributed to wear or a problem with the door latch assembly hence operational challenges and inconvenience. It is important that a car owner should take time often to service the Dodge Charger's Interior Door Handle since it is one of the vital parts that gives power and comfort to the car and also maintain the neat look of the Interiors.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Charger Door Handle at great affordable prices. Moreover, all genuine Dodge Charger Door Handle come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Charger Door Handle Parts Questions & Experts Answers

Handle-Exterior Door
4589009AG
Q: How to remove and install a door latch,Door Lock Cylinder and outside door handle on Dodge Charger?
A: Raise the window completely and remove the door trim panel and water shield. Remove the door speaker. Remove the fasteners at the rear glass run channel and move the channel away from the latch (Remove the fasteners securing the pull cup bracket). This provides a little extra working room in the latch area inside the door. Rotate the plastic retaining clips off the rods, then detach the latch links. Disconnect the electrical connector. Remove the three mounting screws (it may be necessary to use an impact-type screwdriver to loosen them), then remove the latch from the door ( Remove the latch mounting screws). Place the latch in position and install the screws. Tighten the screws securely. Connect the link rods and electrical connector to the latch. The remainder of installation is the reverse of removal. Remove the outside door handle. Withdraw the lock cylinder from the door handle. Installation is the reverse of removal. Remove the door trim panel. Remove the door speaker. Remove the fasteners at the rear glass run channel and move the channel away from the latch. This provides a little extra working room in the latch area inside the door. Disconnect the link rods from the outside handle, remove the mounting fasteners and carefully detach the handle from the door. Place the handle in position, attach the link and install the nuts. Tighten the fasteners securely. The remainder of installation is the reverse of removal.