Where is the IAT Sensor Located on Dodge Charger?

The Intake Manifold Temperature sensor is on the air intake duct of all engines. The exact location may vary depending on the engine, but the same sensor is used for all engines. To remove the sensor, unlock and disconnect the electrical connector by pushing the lock towards the harness and depressing the release tab. Note the orientation of the sensor before removing it. To install a new or old sensor, it must be correctly oriented. Grasp the sensor firmly and pull it straight out of the air intake duct. Installation is the reverse of removal.

Genuine Dodge Charger Intake Manifold Temperature Sensor

Air Intake Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Intake Manifold Temperature Sensors found

View related parts
Dodge Charger Sensor-Charge Air Temp
Part Number: 5149279AC
$29.18 MSRP: $43.05
You Save: $13.87 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor Charge Air Temp
- Replaces: 5149279AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Charger | Police AWD, Police RWD, R/T 392 RWD, R/T AWD, R/T RWD, SRT 392 RWD, SRT Hellcat RWD, SRT Hellcat Widebody RWD, SRT RWD, SRT Superbee RWD, SRT8 RWD, SRT8 Superbee RWD, Scat Pack RWD | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Charger Sensor-Air Temperature
Part Number: 5149182AB
$28.79 MSRP: $42.40
You Save: $13.61 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor Air Temperature
- Replaces: 5149182AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Charger | GT AWD, GT RWD, Police RWD, SE AWD, SE RWD, SRT Hellcat Widebody RWD, SXT AWD, SXT Plus RWD, SXT RWD, V6 AWD | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Sensor-Air Temperature
Part Number: 56028364AA
$27.46 MSRP: $40.75
You Save: $13.29 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor Air Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Charger | Base RWD, R/T AWD, R/T RWD | 8 Cyl 5.7L
View related parts
Dodge Charger Sensor-Charge Air Temp
Part Number: 4606487AB
$63.83 MSRP: $96.10
You Save: $32.27 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor Charge Air Temp
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Dodge Charger | Base AWD, Base RWD, R/T AWD, R/T RWD, Rallye AWD, Rallye RWD, SRT8 RWD, SXT AWD, SXT RWD | 6 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1L
View related parts
Dodge Charger Sensor-Charge Air Temp
Part Number: 5149279AB
$28.73 MSRP: $43.05
You Save: $14.32 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor Charge Air Temp
- Replaced by: 5149279AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2013 Dodge Charger | Police RWD, R/T AWD, R/T RWD, SRT8 RWD, SRT8 Superbee RWD | 8 Cyl 5.7L, 8 Cyl 6.4L

Dodge Charger Intake Manifold Temperature Sensor

The Charger IAT sensor is an important component responsible for the detection of the temperature of the air that gets into the engine to facilitate effective combustion thereby promoting efficient engine performance. This information is reported to the PCM which in turns adjusts the fuel injector timing to meet various requested air/fuel ratio for different operating conditions. There are quite a number of Intake Manifold Temperature Sensors for the Dodge Charger cars over the years, but the common ones include Mass Air flow sensors, and Velocity Air flow sensors. It is noteworthy that each of them is tuned for certain air flow values, and is used in conjunction with certain fuel injectors. Changes in these sensors can impact their capacity to manage greater airflow commonly realized in mods, including oversized throttle bodies and high-flow fuel injectors. Functioning of the Intake Manifold Temperature Sensor has to be fine as any sort of problems can lead to a problem such as stalling or wrong air/fuel mix ratios.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Charger Intake Manifold Temperature Sensor at great affordable prices. Moreover, all genuine Dodge Charger Intake Manifold Temperature Sensor come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Charger Intake Manifold Temperature Sensor Parts Questions & Experts Answers

Sensor-Charge Air Temp
4606487AB
Q: Where is the IAT Sensor Located on Dodge Charger?
A: The Intake Manifold Temperature sensor is on the air intake duct of all engines. The exact location may vary depending on the engine, but the same sensor is used for all engines. To remove the sensor, unlock and disconnect the electrical connector by pushing the lock towards the harness and depressing the release tab. Note the orientation of the sensor before removing it. To install a new or old sensor, it must be correctly oriented. Grasp the sensor firmly and pull it straight out of the air intake duct. Installation is the reverse of removal.