×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Dodge Colt Door Lock
Power Door Lock Actuator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Door Lock found
Dodge Colt Door Lock
Door Lock in Dodge Colt automobiles is primarily used to lock the car thus making it impossible for an unauthorized person to gain access to the vehicle or anyone inside during a move. In the past, Dodge Colt has applied several types for the Door Lock, which include the ordinary key lock, power lock, remote key-less entry, and automatic locking system. On the power door locks there is a switch that makes it possible to lock and unlock all the doors at the same time that was a great addition in this Dodge Colt models. Another interior feature, known as remote keyless entry systems, which appeared in the mid 1980, allow door operations through a keyless entry remote. These Door Lock systems have also advanced with automotive technology, the current systems usually come with automatic functions where the doors lock on engaging the gear or reaching a certain speed limit. In general, there has been development in the Door Lock mechanisms of Dodge Colt which enhances its security and operation for the users.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Colt Door Lock at great affordable prices. Moreover, all genuine Dodge Colt Door Lock come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Colt Door Lock Parts Questions & Experts Answers
- Q: How do you remove and refit the door lock and handle on Dodge Colt?A: Remove the door glass and regulator, then detach the interior remote control handle along with the two control rods from the handle. Disconnect the short link rod, pull out the securing clip, and remove the lock cylinder. Next, disconnect the longer link rod, unscrew the two securing nuts, and remove the door exterior handle. Unscrew and remove the four screws from the latch and withdraw the latch with the two control rods. For refitting, apply grease to all friction surfaces and fit the lock cylinder so that its drain hole faces down. Once fitted, adjust the play of the lock interior handle to between 0.16 and 0.40 in (4.0 and 10.0 mm) by sliding the handle mounting plate within the limits of its elongated mounting plate. The length of travel of the lock button can be adjusted by releasing the screw, and the plug in the exterior handle is adjustable by means of the trunnion on the threaded rod, which should be between 0.12 and 0.24 in (3.0 to 6.0 mm).
Related Dodge Colt Parts
Dodge Colt Door Handle
Dodge Colt Door Hinge
Dodge Colt Door Latch Assembly
Dodge Colt Door Lock Cylinder
Dodge Colt Door Moldings
Dodge Colt Drain Plug