Genuine Dodge Colt Exhaust Manifold

Engine Exhaust Manifold
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Exhaust Manifolds found

  • Dodge Colt Exhaust Manifold - MD099975
    Diagram for Dodge Colt Exhaust Manifold - MD099975
    View related parts
    Product Specifications
    • Other Name: Manifold, Exhaust; Manifold
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following Vehicles:
    • 1988 Dodge Colt | EJ3
  • Dodge Colt Exhaust Manifold - MD081821
    Product Specifications
    • Other Name: Manifold,-Exhaust; Manifold
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following Vehicles:
    • 1985-1986 Dodge Colt | EF2, EJ2

Dodge Colt Exhaust Manifold

The Exhaust Manifold of Dodge Colt vehicles helps in channeling hot gases from the engine to the Exhaust systems hence enhancing the performance of the engine and at the same time minimizing on the emission of dangers gases to the environment. Sited at assorted places on the engine block, the manifold is intended to gather exhaust from several cylinders inclusive of a number of tubes equal to the cylinders in the engine. Dodge Colt exhaust manifolds have been made either of cast iron or stainless, whereas headers are other kinds of exhaust manifolds that one can buy in the market to potentially increase performance by decreasing flow restriction. They also enhance the rate of the exhaust gas thereby resulting in better efficiency of the engine. The design and material variations across different Dodge Colt models may influence performance characteristics, but the primary function remains consistent: for the purpose of allowing the efficient release of exhaust gases while excluding backpressure that might negatively impact operation of the engine.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Colt Exhaust Manifold at great affordable prices. Moreover, all genuine Dodge Colt Exhaust Manifold come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Colt Exhaust Manifold Parts Questions & Experts Answers

  • Q: What Are the Features and Removal/Installation Procedures for the Intake and Exhaust Manifolds on Dodge Colt?
    A: The intake manifold, made of lightweight alloy, is attached to the cylinder head, pre-heating the carburettor via coolant passages. Before removal, the cooling system must be drained and the thermostat housing hose disconnected. The distributor must also be removed due to its position in the manifold flange. A new gasket and cement are needed when refitting. The cast iron exhaust manifold is on the opposite side, featuring a heat shield for the air cleaner. Its flange gaskets form heat shields. The exhaust system, varying by operating territory, is in two sections, attached to the manifold with a flanged joint. Regular corrosion checks are necessary, and sections can be independently replaced. The exhaust system is flexibly mounted.

Related Dodge Colt Parts