How to remove and install the blower motor and blower motor resistor on Dodge Dakota?

Blower motor resistor, Disconnect battery, remove glove box or cover, disconnect connectors, remove screws and resistor. Reverse for installation. Blower motor: Remove kick panel, disconnect connector, remove screws and motor. Replace if damaged. Reverse for installation. Rear blower motor resistor (Durango): Disconnect battery, remove panel, disconnect connector, remove screw and resistor. Reverse for installation. Rear blower motor: Discharge AC, disconnect battery, remove refrigerant line fitting, remove hoses, remove panel, remove air ducts, disconnect connectors, remove housing, disconnect motor connector, remove screws and motor. Reverse for installation. Replace O-rings, evacuate, recharge, and leak-test system. Check coolant level.

Genuine Dodge Dakota Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Blower Motor Resistors found

View related parts
Dodge Dakota Resistor-A/C Blower Motor
Part Number: 4462841
$6.22 MSRP: $7.92
You Save: $1.70 (22%)
ADD TO CART
Product Specifications
- Other Name: Resistor, A/C. Blower Motor; Blower Motor Resistor, Resistor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1988-1996 Dodge Dakota | 3-Person Cab 2WD, 3-Person Cab 4WD, Club Cab 2WD, Club Cab 4WD, Regular Cab 2WD, Regular Cab 4WD | 4 Cyl 2.2L, 4 Cyl 2.5L, 6 Cyl 3.9L, 8 Cyl 5.2L
View related parts
Dodge Dakota Resistor-Blower Motor
Part Number: 5161067AA
$20.40 MSRP: $30.30
You Save: $9.90 (33%)
ADD TO CART
Product Specifications
- Other Name: Resistor Blower Motor
- Replaced by: 5161067AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Dodge Dakota | Laramie Club Cab 2WD, Laramie Club Cab 4WD, Laramie Quad Cab 2WD, Laramie Quad Cab 4WD, SLT Club Cab 2WD, SLT Club Cab 4WD, SLT Quad Cab 2WD, SLT Quad Cab 4WD, ST Club Cab 2WD, ST Club Cab 4WD, ST Quad Cab 2WD, ST Quad Cab 4WD | 6 Cyl 3.7L, 8 Cyl 4.7L
View related parts
Dodge Dakota Resistor-Blower Motor
Part Number: 5161067AB
$20.85 MSRP: $30.30
You Save: $9.45 (32%)
ADD TO CART
Product Specifications
- Other Name: Resistor Blower Motor; Resistor
- Replaces: 5161067AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2011 Dodge Dakota | Laramie Club Cab 2WD, Laramie Club Cab 4WD, Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Extended Cab 2WD, Laramie Extended Cab 4WD, Laramie Quad Cab 2WD, Laramie Quad Cab 4WD, SLT Club Cab 2WD, SLT Club Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Extended Cab 2WD, SLT Extended Cab 4WD, SLT Quad Cab 2WD, SLT Quad Cab 4WD, ST Club Cab 2WD, ST Club Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Extended Cab 2WD, ST Extended Cab 4WD, ST Quad Cab 2WD, ST Quad Cab 4WD, SXT Crew Cab 2WD, SXT Crew Cab 4WD, SXT Extended Cab 2WD, SXT Extended Cab 4WD, Sport Crew Cab 2WD, Sport Crew Cab 4WD, Sport Extended Cab 2WD, Sport Extended Cab 4WD, TRX Crew Cab 2WD, TRX Crew Cab 4WD, TRX Extended Cab 2WD, TRX Extended Cab 4WD | 6 Cyl 3.7L, 8 Cyl 4.7L
View related parts
Dodge Dakota Resistor-Blower Motor
Part Number: 55055467AB
Product Specifications
- Other Name: Resistor Blower Motor; Resistor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Dodge Dakota | Club Cab 2WD, Club Cab 4WD, Regular Cab 2WD, Regular Cab 4WD | 4 Cyl 2.5L, 6 Cyl 3.9L, 8 Cyl 5.2L, 8 Cyl 5.9L
View related parts
Dodge Dakota Resistor-Blower Motor
Part Number: 55056041AB
Product Specifications
- Other Name: Resistor Blower Motor; Resistor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Dodge Dakota | Club Cab 2WD, Club Cab 4WD, Quad Cab 2WD, Quad Cab 4WD, Regular Cab 2WD, Regular Cab 4WD | 4 Cyl 2.5L, 6 Cyl 3.9L, 8 Cyl 4.7L, 8 Cyl 5.9L

Dodge Dakota Blower Motor Resistor

The Dodge Dakota Blower Motor Resistor has to work effectively so as to control the pace of blower motor that is useful in circulating either heated or cool air in the car. This component plays an important role of making sure that both the driver as well as the passengers are comfortable during their travel. Dodge Dakota models use the Blower Motor Resistor in order to control the airflow thus having different speeds. Some of the possible subtypes of Blower Motor Resistor that has been installed in Dodge dakota models throughout the years includes, The main differences among these resistors mainly concern their construction and compatibility with specific model years, to guarantee proper performance of the blower motor in the Dodge Dakota car models range.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Dakota Blower Motor Resistor at great affordable prices. Moreover, all genuine Dodge Dakota Blower Motor Resistor come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Dakota Blower Motor Resistor Parts Questions & Experts Answers

Resistor-Blower Motor
5161067AB
Q: How to remove and install the blower motor and blower motor resistor on Dodge Dakota?
A: Blower motor resistor, Disconnect battery, remove glove box or cover, disconnect connectors, remove screws and resistor. Reverse for installation. Blower motor: Remove kick panel, disconnect connector, remove screws and motor. Replace if damaged. Reverse for installation. Rear blower motor resistor (Durango): Disconnect battery, remove panel, disconnect connector, remove screw and resistor. Reverse for installation. Rear blower motor: Discharge AC, disconnect battery, remove refrigerant line fitting, remove hoses, remove panel, remove air ducts, disconnect connectors, remove housing, disconnect motor connector, remove screws and motor. Reverse for installation. Replace O-rings, evacuate, recharge, and leak-test system. Check coolant level.