×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Dodge Dakota Hood
Engine Hood- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Hoods found
Dodge Dakota Hood Panel Assembly
Part Number: 55359276AC$767.22 MSRP: $1125.00You Save: $357.78 (32%)
Dodge Dakota Hood
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Dakota Hood at great affordable prices. Moreover, all genuine Dodge Dakota Hood come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Dakota Hood Parts Questions & Experts Answers
- Q: How should the hood be removed and installed to ensure proper alignment and fit on Dodge Dakota?A: The hood is heavy and somewhat awkward to remove and install, so at least two people should perform this procedure. Begin by using blankets or pads to cover the cowl area of the body and Fenders to protect the paint. Make marks or scribe a line around the hood hinge for proper alignment during installation. Disconnect any cables or wires that may interfere with removal. Have an assistant support one side of the hood while you support the other, and simultaneously remove the hinge-to-hood nuts, using your shoulder to support the hood while removing the bolts. Lift off the hood, and for installation, reverse the removal steps. For adjustment, fore-and-aft and side-to-side alignment of the hood can be achieved by moving the hinge plate slot after loosening the bolts or nuts. Mark around each hinge plate to determine the amount of movement, then loosen the bolts or nuts and adjust the hood into the correct position, tightening the hinge bolts afterward to check the fit. If necessary, adjust the Hood Latch up-and-down and side-to-side on the radiator support to ensure the hood closes securely and flush with the fenders, making marks around the latch for reference before repositioning it. Finally, adjust the hood bumpers on the radiator support to ensure the hood is flush with the fenders when closed, and periodically lubricate the hood latch assembly and hinges with white, lithium-base grease to prevent binding and wear.
