×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Dodge Dakota Steering Knuckle
Front Steering Knuckle- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
21 Steering Knuckles found
Dodge Dakota Front Steering Knuckle
Part Number: 52106947AD$356.95 MSRP: $411.00You Save: $54.05 (14%)
Dodge Dakota Front Steering Knuckle
Part Number: 52855117AA$542.64 MSRP: $794.00You Save: $251.36 (32%)Dodge Dakota Front Steering Knuckle
Part Number: 52855116AA$562.02 MSRP: $823.00You Save: $260.98 (32%)
Dodge Dakota Front Steering Knuckle
Part Number: 52855116AB$562.02 MSRP: $823.00You Save: $260.98 (32%)Dodge Dakota Front Steering Knuckle
Part Number: 52855117AB$542.64 MSRP: $794.00You Save: $251.36 (32%)
| Page 1 of 2 |Next >
1-20 of 21 Results
Dodge Dakota Steering Knuckle
The Steering Knuckle of the particular Dodge Dakota acts an integral part of the car's suspension and steering system that join the front wheels to control arms and tie rod ends. This design enables it to go up or down as a result of road surface and to go side ways during turning. Kinking types on Dodge Dakota include But, depending on whether the Dakota automobile model in question is an RWD model or an FWD/AWD/4WD model, there are different Steering Knuckle types. Depending on the model, some RWD models may have an integrated spindle while the FWD/AWD/4WD models may come with a hub bolted on the Steering Knuckle. In years past, the Dakota has seen a variety of Steering Knuckles, but the modern steering Steering Knuckle type is more advanced than in the old kingpin type. Whereas former models featured kingpins, today's models feature ball joints in an effort to enhance the performance. Thus, the main task of the Steering Knuckle is the stability of the rotation of the wheel and its control, thus, being one of the crucial components in handling and safety of the vehicle, namely Dodge Dakota. Inspection and maintenance of the Steering Knuckle should always be done after certain intervals to increase its durability as well as efficiency.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Dakota Steering Knuckle at great affordable prices. Moreover, all genuine Dodge Dakota Steering Knuckle come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Dakota Steering Knuckle Parts Questions & Experts Answers
- Q: How to Remove and Install a Steering Knuckle on Dodge Dakota?A: If you're working on a 4WD model, start by removing the driveaxle/hub nut. Next, loosen the wheel lug nuts and raise the vehicle, supporting it securely on jackstands. Remove the wheel and then proceed to remove the brake disc and wheel speed sensor. Disconnect the tie-rod from the steering knuckle and support the lower Control Arm with a floor jack. Separate the upper control arm from the steering knuckle, followed by separating the lower control arm from the steering knuckle. Carefully inspect the steering knuckle for cracks, especially around the steering arm and spindle mounting area, as well as the balljoint stud holes. If any cracks or elongated holes are found, replace the steering knuckle. Finally, for installation, reverse the removal steps and ensure that all suspension fasteners are tightened to the specified torque.
Related Dodge Dakota Parts
Browse by Year
2011 Steering Knuckle 2010 Steering Knuckle 2009 Steering Knuckle 2008 Steering Knuckle 2007 Steering Knuckle 2006 Steering Knuckle 2005 Steering Knuckle 2004 Steering Knuckle 2003 Steering Knuckle 2002 Steering Knuckle 2001 Steering Knuckle 2000 Steering Knuckle 1999 Steering Knuckle 1998 Steering Knuckle 1997 Steering Knuckle 1996 Steering Knuckle 1995 Steering Knuckle 1994 Steering Knuckle 1993 Steering Knuckle 1992 Steering Knuckle 1991 Steering Knuckle 1990 Steering Knuckle