×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Dodge Daytona Parking Brake Cable
Emergency Parking Brake Release Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
8 Parking Brake Cables found
Dodge Daytona Assembly-Parking Brake Int
Part Number: 4294917$10.61 MSRP: $12.25You Save: $1.64 (14%)
Dodge Daytona Parking Brake Cable
The Parking Brake Cable is one of the components used in Dodge Daytona cars and is used to aid the parking brake system which help in keeping the car stationary especially whenever parked on a slope. This cable links the parking brake or the emergency brake or the handbrake to the systems brakes and is definitely necessary. Throughout the years of manufacturing Dodge Daytona perhaps there have been some variation in the style of Parking Brake Cable that are known for activating the parking brakes. A good Parking Brake Cable is very important, a bad cable which may be weak, or too stretched may produce less force on the brake drum while a non existent cable means a defective parking brake. This can be done by conducting a routine check on the various signs such as the parking brake light which in this case can reveal problems of the Parking Brake Cable to guarantee the safety of the Dodge Daytona.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Daytona Parking Brake Cable at great affordable prices. Moreover, all genuine Dodge Daytona Parking Brake Cable come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Daytona Parking Brake Cable Parts Questions & Experts Answers
- Q: How to install and adjust a parking brake cable on Dodge Daytona?A: Raise the vehicle and support it securely. Working underneath the vehicle, loosen the adjusting nut and disengage the cable from the connector. Inside the vehicle, lift the floor mat or carpeting and remove the floor pan seal panel. Pull the cable forward to disconnect it from the clevis. Remove the cable assembly through the hole. To install the cable, insert the cable housing retainers into the rail bracket hole and the parking brake pedal assembly. Feed the end of the cable through the holes in the pan and the rail bracket. Install the floor seal. Engage the end of the cable in the lever clevis and seat the cable ends in the parking brake assembly and the rail bracket. Install the floor mat. Engage the rear cable in the equalizer bracket, then adjust it. Remove the rear wheels and the hub/drum assemblies. Back off the adjusting nut until the cable is slack. Disconnect the rear brake cable from the connector. Disconnect the cable at the brake shoe lever. Use a screw-type hose clamp to compress the retainers so the cable can be removed from the brake backing plate. Remove the clamp when the cable is free. Pull the cable from the backing plate and rear axle. To install the cable, insert the cable and the inner housing end through the trailing arm holes and the crossmember cable bracket. Connect the chassis fitting to the bracket. Insert the outer cable end through the support hole and snap the retainer into place. Attach the cable to the lever in the brake shoe assembly, making sure the washer is between the cable spring and parking brake lever. Insert the cable inner end into the connector. Install the hub/drum assemblies. Attach the cable to the connector, then adjust the parking brake.
