How to remove and install front and rear bumpers on Dodge Durango?

All vehicles have a front bumper system consisting of a brush guard, painted bumper cover, painted fascia, and a structural member all painted black for appearance from the exterior, and a black ABS plastic fascia from the interior to protect the lower valence, with Durango models using the same material for the rear bumpers. To demount the bumper cover you should start with the removal of the radiator grille and then the headlight housings which are followed by the unbolt of the fasteners located at the end of the bumper in the front wheelwell. For Dakota models, the upper mounting fasteners as well as the bumper cover should be detached and, for Durango models, the tabs at the top should be popped to take off the bumper cover. The process of installation is to the contrary of the removal process. Second, to gain access to the bumper cover support, the bumper cover must be removed and if available any fog lamp must be disconnected. For the Dakota models, three fasteners must be uncoupled at the top and six at the front of the support, while for Durango models one must remove the fasteners near the fog lamps before removing the support. Once more, installation is done in the reverse order to the diagram below. The rear bumper for Durango models may be removed by first opening the liftgate: next, remove the upper mounting bolts, then the bottom and side bolts and finally, the rear bumper cover. The process of installation is just an opposite way to the process removal. Again, for Dakota models, pull off any electrical connectors that may hinder the process and you have to use a wrench to take off the bolts at the center of the bumper to the crossmember or to the hitch and with the assistance of another person, you require removing the bolts/nuts attaching the bumper to the hitch or frame rails. Installation procedure is the exact opposite to removal procedure.

Genuine Dodge Durango Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

93 Bumpers found

View related parts
Dodge Durango Rear Bumper Cover Lower
Part Number: 5113699AB
$352.71 MSRP: $630.00
You Save: $277.29 (45%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Rear Lower
- Replaced by: 68260788AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2015 Dodge Durango | Citadel AWD, Citadel RWD, Limited AWD, Limited RWD, R/T AWD, R/T RWD, Special Service AWD, Special Service RWD, SXT AWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Dodge Durango Front Lower Bumper Cover
Part Number: 68089166AC
$146.40 MSRP: $218.00
You Save: $71.60 (33%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Front Lower; Lower Cover
- Position: Front Lower
- Replaces: 68089166AA, 68089166AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2013 Dodge Durango | Citadel AWD, Citadel RWD, Crew AWD, Crew RWD, Express AWD, Express RWD, Heat AWD, Heat RWD, R/T AWD, R/T RWD, SXT AWD, SXT RWD, Special Service AWD, Special Service RWD | 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Dodge Durango Rear Upper Bumper Cover
Part Number: 68092093AB
$316.97 MSRP: $469.00
You Save: $152.03 (33%)
ADD TO CART
Product Specifications
- Other Name: FASCIA-Rear Upper; Bumper Cover
- Position: Rear Upper
- Replaces: 68092093AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Durango | Citadel AWD, Citadel RWD, Crew AWD, Crew RWD, Express AWD, Express RWD, GT AWD, GT RWD, Heat AWD, Heat RWD, Limited AWD, Limited RWD, Pursuit Vehicle AWD, R/T AWD, R/T RWD, SRT 392 AWD, SRT AWD, SRT Hellcat AWD, SXT AWD, SXT RWD, Special Service AWD, Special Service RWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Durango Fascia-Front Upper
Part Number: 1XV03TZZAD
$389.70 MSRP: $568.00
You Save: $178.30 (32%)
ADD TO CART
Product Specifications
- Other Name: Bumper Cover
- Replaces: 1XV03TZZAB, 1XV03TZZAC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2020 Dodge Durango | Citadel AWD, Citadel RWD, GT AWD, GT RWD, Limited AWD, Limited RWD, Pursuit Vehicle AWD, R/T AWD, R/T RWD, SRT AWD, SXT AWD, SXT RWD, Special Service AWD, Special Service RWD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.4L
View related parts
Dodge Durango Front Upper Bumper Cover
Part Number: 6PN54TZZAA
$613.14 MSRP: $894.00
You Save: $280.86 (32%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Front Upper; Bumper Cover
- Position: Front Upper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2020 Dodge Durango | Citadel AWD, Citadel RWD, GT AWD, GT RWD, Pursuit Vehicle AWD, R/T AWD, R/T RWD, Special Service RWD, SRT AWD, SXT AWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.4L
View related parts
Dodge Durango Front Upper Bumper Cover
Part Number: 1XV03TZZAB
$389.70 MSRP: $568.00
You Save: $178.30 (32%)
ADD TO CART
Product Specifications
- Other Name: Fascia Front Upper Primed
- Replaced by: 1XV03TZZAD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2017 Dodge Durango | Citadel AWD, Citadel RWD, GT AWD, GT RWD, Limited AWD, Limited RWD, R/T AWD, R/T RWD, Special Service AWD, Special Service RWD, SXT AWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Dodge Durango Rear Bumper Cover Lower
Part Number: 68260787AA
$258.16 MSRP: $379.00
You Save: $120.84 (32%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Rear Lower; Lower Cover
- Position: Rear Lower
- Replaces: 5113698AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2023 Dodge Durango | Citadel AWD, Citadel RWD, GT AWD, GT RWD, Limited AWD, Limited RWD, Pursuit Vehicle AWD, R/T AWD, R/T RWD, SRT 392 AWD, SRT AWD, SRT Hellcat AWD, SXT AWD, SXT RWD, Special Service AWD, Special Service RWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Durango Front Upper Bumper Cover
Part Number: 6RP39TZZAA
$503.70 MSRP: $734.00
You Save: $230.30 (32%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Front Upper; Bumper Cover
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2020 Dodge Durango | Citadel AWD, Citadel RWD, GT AWD, GT RWD, Pursuit Vehicle AWD, R/T AWD, R/T RWD, Special Service RWD, SRT AWD, SXT AWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.4L
View related parts
Dodge Durango Rear Bumper Cover Lower
Part Number: 68260788AA
$352.71 MSRP: $630.00
You Save: $277.29 (45%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Rear Lower; Lower Cover
- Position: Rear Lower
- Replaces: 5113699AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2023 Dodge Durango | Citadel AWD, Citadel RWD, GT AWD, GT RWD, Limited AWD, Limited RWD, Pursuit Vehicle AWD, R/T AWD, R/T RWD, SRT 392 AWD, SRT AWD, SRT Hellcat AWD, SXT AWD, SXT RWD, Special Service AWD, Special Service RWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Durango Rear Upper Bumper Cover
Part Number: 68237676AA
$322.89 MSRP: $665.00
You Save: $342.11 (52%)
ADD TO CART
Product Specifications
- Other Name: FASCIA-Rear Upper
- Position: Rear Upper
- Replaced by: 68237676AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2015 Dodge Durango | Citadel AWD, Citadel RWD, Limited AWD, Limited RWD, R/T AWD, R/T RWD, Special Service AWD, Special Service RWD, SXT AWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Dodge Durango Rear Bumper Cover
Part Number: 5JE57TZZAA
$290.16 MSRP: $521.00
You Save: $230.84 (45%)
ADD TO CART
Product Specifications
- Other Name: FASCIA-Rear
- Position: Rear
- Replaced by: 5JE57TZZAE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2005 Dodge Durango | Limited 2WD, Limited 4WD, SLT 2WD, SLT 4WD, ST 2WD, ST 4WD, SXT 2WD, SXT 4WD | 6 Cyl 3.7L, 8 Cyl 4.7L, 8 Cyl 5.7L
View related parts
Dodge Durango Rear Bumper Cover
Part Number: 5JE57TZZAD
$290.16 MSRP: $521.00
You Save: $230.84 (45%)
ADD TO CART
Product Specifications
- Other Name: FASCIA-Rear
- Position: Rear
- Replaced by: 5JE57TZZAE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Dodge Durango | Limited 2WD, Limited 4WD, SLT 2WD, SLT 4WD, SXT 2WD, SXT 4WD | 6 Cyl 3.7L, 8 Cyl 4.7L, 8 Cyl 5.7L
View related parts
Dodge Durango Rear Bumper Cover
Part Number: 5JE57TZZAE
$290.16 MSRP: $521.00
You Save: $230.84 (45%)
ADD TO CART
Product Specifications
- Other Name: FASCIA-Rear; Bumper Cover
- Replaces: 5JE57ARHAE, 5JE57CDMAE, 5JE57PR4AE, 5JE57AJCAE, 5JE57WB7AE, 5JE57TZZAA, 5JE57TZZAB, 5JE57WS2AE, 5JE57ZBJAE, 5JE57TZZAC, 5JE57TZZAD, 5JE57DX8AE, 5JE57GW7AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Dodge Durango | Limited 2WD, Limited 4WD, SLT 2WD, SLT 4WD, ST 2WD, ST 4WD, SXT 2WD, SXT 4WD | 6 Cyl 3.7L, 8 Cyl 4.7L, 8 Cyl 5.7L
View related parts
Dodge Durango Front Lower Bumper Cover
Part Number: 5ZW22TZZAA
$267.20 MSRP: $402.00
You Save: $134.80 (34%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Front Lower; Lower Cover
- Position: Front Lower
- Replaces: 5ZW22GTWAA, 5ZW22KFSAA, 5ZW22JRPAA, 5ZW22JRMAA, 5ZW22AXRAA, 5ZW22HT6AA, 5ZW22KGZAA, 5ZW22LAUAA, 5ZW22GW7AA, 5ZW22KBUAA, 5ZW22KARAA, 5ZW22NRVAA, 5ZW22JSCAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2020 Dodge Durango | Citadel AWD, Citadel RWD, GT AWD, GT RWD, Limited AWD, Limited RWD, Pursuit Vehicle AWD, R/T AWD, R/T RWD, Special Service AWD, Special Service RWD, SRT AWD, SXT AWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.4L
View related parts
Dodge Durango Front Lower Bumper Cover
Part Number: 68089166AB
$146.40 MSRP: $218.00
You Save: $71.60 (33%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Front Lower
- Position: Front Lower
- Replaced by: 68089166AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2012 Dodge Durango | Citadel AWD, Citadel RWD, Crew AWD, Crew RWD, Express AWD, Express RWD, Heat AWD, Heat RWD, R/T AWD, R/T RWD, Special Service AWD, Special Service RWD, SXT AWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Dodge Durango Front Bumper Cover
Part Number: 5HP18TZZAB
$345.40 MSRP: $524.00
You Save: $178.60 (35%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Front; Bumper Cover
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Dodge Durango | Limited 2WD, Limited 4WD, SLT 2WD, SLT 4WD, SXT 2WD, SXT 4WD | 6 Cyl 3.7L, 8 Cyl 4.7L, 8 Cyl 5.7L
- 2004 Dodge Durango | Limited 2WD, Limited 4WD, SLT 2WD, SLT 4WD, ST 2WD, ST 4WD | 6 Cyl 3.7L, 8 Cyl 4.7L, 8 Cyl 5.7L
View related parts
Dodge Durango Front Bumper Cover
Part Number: 5073022AA
$440.00 MSRP: $667.00
You Save: $227.00 (35%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Front
- Position: Front
- Replaced by: 5073022AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Dodge Durango | Base 2WD, Base 4WD, R/T 4WD, SLT 2WD, SLT 4WD, SLT Plus 2WD, SLT Plus 4WD, Sport 2WD, Sport 4WD | 8 Cyl 4.7L, 8 Cyl 5.9L
View related parts
Dodge Durango Rear Bumper Cover Lower
Part Number: 5113698AC
$258.16 MSRP: $379.00
You Save: $120.84 (32%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Rear Lower
- Position: Rear Lower
- Replaced by: 68260787AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014 Dodge Durango | Citadel AWD, Citadel RWD, Limited AWD, Limited RWD, R/T AWD, R/T RWD, Special Service AWD, Special Service RWD, SXT AWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Dodge Durango Fascia-Front Lower
Part Number: 6UZ18TZZAA
$120.54 MSRP: $176.00
You Save: $55.46 (32%)
ADD TO CART
Product Specifications
- Other Name: Air Deflector
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2023 Dodge Durango | Citadel AWD, Citadel RWD, GT AWD, GT RWD, Pursuit Vehicle AWD, R/T AWD, R/T RWD, SRT 392 AWD, SRT Hellcat AWD, SXT AWD, SXT RWD, Special Service RWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Durango Fascia-Front Lower
Part Number: 6UZ17RXFAA
$66.06 MSRP: $94.55
You Save: $28.49 (31%)
ADD TO CART
Product Specifications
- Position: Front Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021 Dodge Durango | Citadel AWD, Citadel RWD, GT AWD, GT RWD, Pursuit Vehicle AWD, R/T AWD, R/T RWD, Special Service RWD, SRT 392 AWD, SRT Hellcat AWD, SXT AWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L

| Page 1 of 5 |Next >

1-20 of 93 Results

Dodge Durango Bumper

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Durango Bumper at great affordable prices. Moreover, all genuine Dodge Durango Bumper come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Durango Bumper Parts Questions & Experts Answers

Front Bumper Cover
5HP21ZSPAB
Q: How to remove and install front and rear bumpers on Dodge Durango?
A: All vehicles have a front bumper system consisting of a brush guard, painted bumper cover, painted fascia, and a structural member all painted black for appearance from the exterior, and a black ABS plastic fascia from the interior to protect the lower valence, with Durango models using the same material for the rear bumpers. To demount the bumper cover you should start with the removal of the radiator Grille and then the headlight housings which are followed by the unbolt of the fasteners located at the end of the bumper in the front wheelwell. For Dakota models, the upper mounting fasteners as well as the bumper cover should be detached and, for Durango models, the tabs at the top should be popped to take off the bumper cover. The process of installation is to the contrary of the removal process. Second, to gain access to the bumper cover support, the bumper cover must be removed and if available any fog lamp must be disconnected. For the Dakota models, three fasteners must be uncoupled at the top and six at the front of the support, while for Durango models one must remove the fasteners near the fog lamps before removing the support. Once more, installation is done in the reverse order to the diagram below. The rear bumper for Durango models may be removed by first opening the liftgate: next, remove the upper mounting bolts, then the bottom and side bolts and finally, the rear bumper cover. The process of installation is just an opposite way to the process removal. Again, for Dakota models, pull off any electrical connectors that may hinder the process and you have to use a wrench to take off the bolts at the center of the bumper to the crossmember or to the hitch and with the assistance of another person, you require removing the bolts/nuts attaching the bumper to the hitch or frame rails. Installation procedure is the exact opposite to removal procedure.