How to remove and install an automatic transmission oil cooler on Dodge Durango?

Every automatic-transmission automobile contains an air-to-oil cooler as a building block or an option as well as an oil-to-coolant cooler. External transmission oil coolers are generally located above the radiator, but their size can be different, as well as the location and number of mounting bolts. First of all unscrew the cable from the negative terminal of the battery and put a drain pan under the fittings on the oil cooler line to collect the dropped transmission fluid. Lift the car until it is on jackstands so as to make it easier to check the belts. Taking out the tool that was used in the locking of the fittings in the transmission oil cooler line, it will open the supply line for a moment, pull the line from the cooler and plug the point to minimize leakage. Either separate the transmission oil cooler hoses from the side tank of the radiator or from the transmission, or remove the upper cover and support of the radiator and proceed to the cooler. Pull out the cooler by retracting the mounting bolts endowed for this task although one should ensure not tighten the oil cooler tubes or the radiator fins. If the cooler was taken out to flush it after a transmission failure, it is recommended to have it flushed by a dealer service department or a transmission shop because a properly flushing requires special tools. Reassembly is done in the reverse order of disassembly but before that it is advised to check the level of the transmission fluid and add the fluid if required.

Genuine Dodge Durango Oil Cooler

Engine Oil Cooler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Oil Coolers found

View related parts
Dodge Durango Cooler-Engine Oil
Part Number: 5181879AE
$286.00 MSRP: $434.00
You Save: $148.00 (35%)
ADD TO CART
Product Specifications
- Other Name: Intercooler, Oil Cooler
- Replaces: 5181879AB, 5181879AC, 5181879AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2023 Dodge Durango | 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
- 2021 Dodge Durango | SRT Hellcat AWD | 8 Cyl 6.2L
View related parts
Dodge Durango Engine Oil Filter Adapter
Part Number: 68365931AA
$163.83 MSRP: $217.00
You Save: $53.17 (25%)
ADD TO CART
Product Specifications
- Other Name: Adapter-Engine Oil Filter
- Replaced by: 68596318AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021 Dodge Durango | Citadel AWD, Citadel RWD, GT AWD, GT RWD, Pursuit Vehicle AWD, SXT AWD, SXT RWD, Special Service RWD | 6 Cyl 3.6L
- 2019 Dodge Durango | Citadel AWD, Citadel RWD, GT AWD, GT RWD, Pursuit Vehicle AWD, SXT AWD, SXT RWD, Special Service RWD | 6 Cyl 3.6L
View related parts
Dodge Durango Engine Oil Cooler
Part Number: 5037523AB
$205.71 MSRP: $308.00
You Save: $102.29 (34%)
ADD TO CART
Product Specifications
- Other Name: Cooler-Engine Oil; Oil Cooler
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2023 Dodge Durango | Citadel AWD, Citadel RWD, Pursuit Vehicle AWD, SRT 392 AWD, SRT AWD, Special Service AWD, Special Service RWD | 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Durango ADAPTER-ENGINE OIL FILTER
Part Number: 68596318AB
$144.17 MSRP: $217.00
You Save: $72.83 (34%)
ADD TO CART
Product Specifications
- Other Name: Filter Adapter, Oil Cooler, Oil Filter Housing
- Replaces: 68308741AC, 68308741AA, 68365931AB, 68308741AB, 68365931AD, 68596318AA, 68308741AF, 68365931AA, 68365931AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2023 Dodge Durango | Citadel AWD, Citadel RWD, GT AWD, GT RWD, Limited AWD, Limited RWD, Pursuit Vehicle AWD, SXT AWD, SXT RWD, Special Service AWD, Special Service RWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Durango Transmission Oil Cooler
Part Number: 52029008AB
$118.05 MSRP: $240.00
You Save: $121.95 (51%)
ADD TO CART
Product Specifications
- Other Name: Cooler-Transmission Oil
- Replaced by: 52029009AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2007 Dodge Durango | Limited 2WD, Limited 4WD, SLT 2WD, SLT 4WD, ST 2WD, SXT 2WD, SXT 4WD | 8 Cyl 5.7L
View related parts
Dodge Durango Transmission Oil Cooler
Part Number: 52029009AC
$118.05 MSRP: $240.00
You Save: $121.95 (51%)
ADD TO CART
Product Specifications
- Other Name: Cooler-Transmission Oil
- Replaced by: 52029009AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Durango | Adventurer 4WD, Limited 2WD, Limited 4WD, SE 2WD, SE 4WD, SLT 2WD, SLT 4WD | 6 Cyl 3.7L, 8 Cyl 4.7L, 8 Cyl 5.7L
View related parts
Dodge Durango Transmission Oil Cooler
Part Number: 68232604AB
$203.48 MSRP: $305.00
You Save: $101.52 (34%)
ADD TO CART
Product Specifications
- Other Name: Cooler-Transmission Oil
- Replaces: 68232604AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2020 Dodge Durango | Citadel AWD, Citadel RWD, GT AWD, GT RWD, Limited AWD, Limited RWD, Pursuit Vehicle AWD, R/T AWD, R/T RWD, SXT AWD, SXT RWD, Special Service AWD, Special Service RWD | 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Dodge Durango Engine Oil Filter
Part Number: 68365931AB
$144.22 MSRP: $217.00
You Save: $72.78 (34%)
ADD TO CART
Product Specifications
- Replaced by: 68596318AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020 Dodge Durango | Citadel AWD, Citadel RWD, GT AWD, GT RWD, Pursuit Vehicle AWD, Special Service RWD, SXT AWD, SXT RWD | 6 Cyl 3.6L
View related parts
Dodge Durango Cooler-Transmission Oil
Part Number: 68480077AA
$133.04 MSRP: $199.00
You Save: $65.96 (34%)
ADD TO CART
Product Specifications
- Other Name: Transmission Cooler
- Replaced by: 68596478AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021 Dodge Durango | Citadel AWD, Citadel RWD, GT AWD, GT RWD, Pursuit Vehicle AWD, R/T AWD, R/T RWD, Special Service RWD, SXT AWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Dodge Durango Transmission Oil Cooler
Part Number: 68232604AA
$203.48 MSRP: $305.00
You Save: $101.52 (34%)
ADD TO CART
Product Specifications
- Other Name: Cooler-Transmission Oil
- Replaced by: 68232604AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2016 Dodge Durango | Citadel AWD, Citadel RWD, Limited AWD, Limited RWD, R/T AWD, R/T RWD, Special Service AWD, Special Service RWD, SXT AWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Dodge Durango Transmission Cooler Assembly
Part Number: 52029009AB
$161.30 MSRP: $240.00
You Save: $78.70 (33%)
ADD TO CART
Product Specifications
- Other Name: Cooler-Transmission Oil; Auxiliary Oil Cooler, Transmission Cooler
- Replaces: 52029008AB, 52029009AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2009 Dodge Durango | Adventurer 2WD, Adventurer 4WD, Limited 2WD, Limited 4WD, SE 2WD, SE 4WD, SLT 2WD, SLT 4WD, ST 2WD, ST 4WD, SXT 2WD, SXT 4WD | 6 Cyl 3.7L, 8 Cyl 4.7L, 8 Cyl 5.7L
View related parts
Dodge Durango Auxiliary Oil Cooler
Part Number: 4883713AB
Product Specifications
- Other Name: Cooler-Auxiliary Oil; Transmission Cooler
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Dodge Durango | Base 2WD, Base 4WD | 6 Cyl 3.9L, 8 Cyl 5.2L, 8 Cyl 5.9L
View related parts
Dodge Durango Engine Oil Cooler
Part Number: 52105585AA
Product Specifications
- Other Name: Cooler-Auxiliary Oil; Transmission Cooler
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999 Dodge Durango | Base 2WD, Base 4WD | 6 Cyl 3.9L, 8 Cyl 5.2L, 8 Cyl 5.9L
View related parts
Dodge Durango Transmission Oil Cooler
Part Number: 82205678
Product Specifications
- Other Name: Cooler-Transmission Oil
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2001 Dodge Durango | Base 2WD, Base 4WD | 8 Cyl 4.7L, 8 Cyl 5.2L, 8 Cyl 5.9L
View related parts
Dodge Durango Auxiliary Oil Cooler
Part Number: 52028779AB
Product Specifications
- Other Name: Cooler-Auxiliary Oil; Transmission Cooler
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2003 Dodge Durango | Base 2WD, Base 4WD, R/T 4WD, SLT 2WD, SLT 4WD, SLT Plus 2WD, SLT Plus 4WD, Sport 2WD, Sport 4WD | 6 Cyl 3.9L, 8 Cyl 4.7L, 8 Cyl 5.2L, 8 Cyl 5.9L
View related parts
Dodge Durango Engine Oil Cooler
Part Number: 4893310AA
Product Specifications
- Other Name: Cooler-Engine Oil; Oil Cooler
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2023 Dodge Durango | Citadel AWD, Citadel RWD, Crew AWD, Crew RWD, Limited AWD, Limited RWD, Pursuit Vehicle AWD, R/T AWD, R/T RWD, Special Service AWD, Special Service RWD | 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

Dodge Durango Oil Cooler

Unlike the simple, fixed Thermostat, which merely controls the flow of coolant to the radiator according to engine temperature, the Durango Oil Cooler is a critical device designed with an important function of cooling engine oil and thus, keeping its viscosity in check. The Oil Cooler comprises Oil-to-Water Cooling mechanisms that are incorporated and flow in the vehicle's cooling systems to enhance quick temperature attainment of oil besides protecting the oil from getting too hot which would cause its deterioration. Throughout the model changes of Dodge Durango, there have been several types of Oil Coolers used in the car mainly for improvement of cooling during aggressive use including towing modes. However, factory-installed coolers seem not be adequate in some occasions, therefore, their failures, such as clogging or even corrosion, may occur frequently in severe situations. By fitting higher quality Oil Cooler kits temperature control for oils is enhanced and as a result the overall life span of the oils as well as the engines for Dodge Durango vehicles is boosted.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Durango Oil Cooler at great affordable prices. Moreover, all genuine Dodge Durango Oil Cooler come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Durango Oil Cooler Parts Questions & Experts Answers

Transmission Oil Cooler
52029008AB
Q: How to remove and install an automatic transmission oil cooler on Dodge Durango?
A: Every automatic-transmission automobile contains an air-to-oil cooler as a building block or an option as well as an oil-to-coolant cooler. External transmission oil coolers are generally located above the radiator, but their size can be different, as well as the location and number of mounting bolts. First of all unscrew the cable from the negative terminal of the battery and put a drain pan under the fittings on the oil cooler line to collect the dropped transmission fluid. Lift the car until it is on jackstands so as to make it easier to check the belts. Taking out the tool that was used in the locking of the fittings in the transmission oil cooler line, it will open the supply line for a moment, pull the line from the cooler and plug the point to minimize leakage. Either separate the transmission oil cooler hoses from the side tank of the radiator or from the transmission, or remove the upper cover and support of the radiator and proceed to the cooler. Pull out the cooler by retracting the mounting bolts endowed for this task although one should ensure not tighten the oil cooler tubes or the radiator fins. If the cooler was taken out to flush it after a transmission failure, it is recommended to have it flushed by a dealer service department or a transmission shop because a properly flushing requires special tools. Reassembly is done in the reverse order of disassembly but before that it is advised to check the level of the transmission fluid and add the fluid if required.