How do you replace the Door Handle,latch and lock cylinder on Dodge Grand Caravan?

When installing a new latch, simply close the window and then take off the door trim panel and the watershield. First, if this is the earlier model, unscrew two Torx-head link rods from the latch, then remove the three Torx-head mounting screws if they are overtightened, using an impact-type screwdriver if possible. Closely unscrew the latch then place the new latch and screw it in tightly until they are tightly fixed. Connect the link rods to the latch and ensure that the door will close well, if the latch is an issue, engage the screws and adjust the latch until the door closes properly with the handle flat. After that tighten the linkage adjusting screw with a 5/32-inches hex-head wrench through the adjustment hole, after that, move the squab up in the slot to remove extra Loose from linkage. For the lock cylinder of the outside door handle, it is necessary to disconnect the connecting link and then push the retainer of the key lock cylinder with use of a screwdriver to pull the lock cylinder out of the door and the process of installation is opposite to the mentioned procedure. To remove the outside handle, push down on the end of the remote control link which disengages the latch, unscrew the two nuts on the mounting plate and remove the handle from the door. Last but not the least, position the handle, connect the link and fix the nuts properly on to the Link fixed on Link rod.

Genuine Dodge Grand Caravan Door Lock Cylinder

Door Lock Cylinder Tumbler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Door Lock Cylinders found

View related parts
Dodge Grand Caravan Cylinder Lock
Part Number: 4778125
$66.27 MSRP: $97.95
You Save: $31.68 (33%)
ADD TO CART
Product Specifications
- Other Name: Lock Cylinder; Cylinder & Key, Lock & Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999 Dodge Grand Caravan | Base, ES AWD, ES FWD, LE AWD, LE FWD, SE AWD, SE FWD | 6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Dodge Grand Caravan Cylinder-Door Lock
Part Number: 5139099AA
$69.77 MSRP: $104.00
You Save: $34.23 (33%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Door Lock; Lock Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2020 Dodge Grand Caravan | C/V, Crew, Express, GT, Hero, LUX, Mainstreet, R/T, SE, SXT | 6 Cyl 3.3L, 6 Cyl 3.6L, 6 Cyl 3.8L, 6 Cyl 4.0L
View related parts
Dodge Grand Caravan Cylinder - Door Lock Uncoded
Part Number: 4720931
$29.63 MSRP: $42.80
You Save: $13.17 (31%)
ADD TO CART
Product Specifications
- Other Name: Cylinder & Key, Lock Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1995 Dodge Grand Caravan | Base, LE AWD, LE FWD, SE AWD, SE FWD | 6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Dodge Grand Caravan Cylinder Lock-Door Lock Cylinder
Part Number: 4778149
$10.16 MSRP: $14.70
You Save: $4.54 (31%)
ADD TO CART
Product Specifications
- Other Name: Cap Door Lock Cylinder Bright; Cap
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Grand Caravan | C/V, SE, SXT FWD | 6 Cyl 3.3L, 6 Cyl 3.8L
- 2000-2005 Dodge Grand Caravan | Base, C/V, EL, ES AWD, ES FWD, EX, LE AWD, LE FWD, SE, SE FWD, SXT AWD, SXT FWD, Sport AWD, Sport FWD | 6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.8L
- 1997-1998 Dodge Grand Caravan | Base, LE AWD, LE FWD, SE AWD, SE FWD | 4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.8L
View More
View related parts
Dodge Grand Caravan Cylinder Lock-Door Lock
Part Number: 5011040AA
$59.05 MSRP: $87.30
You Save: $28.25 (33%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Door Lock; Lock Cylinder
- Replaces: 5056182AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Grand Caravan | C/V, SE, SXT FWD | 6 Cyl 3.3L, 6 Cyl 3.8L
- 2001-2005 Dodge Grand Caravan | C/V, EL, ES AWD, ES FWD, EX, SE, SXT AWD, SXT FWD, Sport AWD, Sport FWD | 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Dodge Grand Caravan Cylinder Lock
Part Number: 4778124
$25.53 MSRP: $69.85
You Save: $44.32 (64%)
ADD TO CART
Product Specifications
- Other Name: Lock Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Dodge Grand Caravan | Base, ES AWD, ES FWD, LE AWD, LE FWD, SE FWD, Sport AWD | 6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.8L
- 1996-1998 Dodge Grand Caravan | Base, LE AWD, LE FWD, SE AWD, SE FWD | 4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Dodge Grand Caravan Cylinder Lock-Sliding DOORLOCK Cylinder
Part Number: 4796390
Product Specifications
- Other Name: Lever Sliding DoorLock Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Dodge Grand Caravan | Base, ES AWD, ES FWD, LE AWD, LE FWD, SE FWD, Sport AWD | 6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.8L
- 1996-1997 Dodge Grand Caravan | Base, LE AWD, LE FWD, SE AWD, SE FWD | 4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Dodge Grand Caravan Cylinder Lock-Door Dual Snap Cap
Part Number: 4723484
Product Specifications
- Other Name: Cylinder, Door; Cylinder & Key, Lock Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1995 Dodge Grand Caravan | Base, LE AWD, LE FWD, SE AWD, SE FWD | 6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Dodge Grand Caravan Cylinder Lock
Part Number: 4723489
Product Specifications
- Other Name: Lock Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993 Dodge Grand Caravan | LE AWD, LE FWD, SE AWD, SE FWD | 6 Cyl 3.0L, 6 Cyl 3.3L

Dodge Grand Caravan Door Lock Cylinder

The Door Lock Cylinder is also found in the of the front doors of the Dodge Grand Caravan vehicles, and this entails the use of car key to lock and unlock the doors Model. These help in achieving a secure way of accessing the interior of the vehicle in addition to having ease of use. In due course, because of more use, the Dodge Grand Caravan Door Lock Cylinder wears out and this can pose a problem in the actual locking or unlocking of the car doors and furthermore, the key is stuck. Despite the fact that many of the car manufacturers of the present times have shifted from conventional door lock cylinders, the Dodge Grand Caravan still employs this component. This feature requires proper maintenance, and timely change of the Door Lock Cylinder to function effectively and provide the required level of security on the automobile.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Grand Caravan Door Lock Cylinder at great affordable prices. Moreover, all genuine Dodge Grand Caravan Door Lock Cylinder come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Grand Caravan Door Lock Cylinder Parts Questions & Experts Answers

Cylinder Lock-Door Lock Cylinder
4778149
Q: How do you replace the Door Handle,latch and lock cylinder on Dodge Grand Caravan?
A: When installing a new latch, simply close the window and then take off the door trim panel and the watershield. First, if this is the earlier model, unscrew two Torx-head link rods from the latch, then remove the three Torx-head mounting screws if they are overtightened, using an impact-type screwdriver if possible. Closely unscrew the latch then place the new latch and screw it in tightly until they are tightly fixed. Connect the link rods to the latch and ensure that the door will close well, if the latch is an issue, engage the screws and adjust the latch until the door closes properly with the handle flat. After that tighten the linkage adjusting screw with a 5/32-inches hex-head wrench through the adjustment hole, after that, move the squab up in the slot to remove extra Loose from linkage. For the lock cylinder of the outside door handle, it is necessary to disconnect the connecting link and then push the retainer of the key lock cylinder with use of a screwdriver to pull the lock cylinder out of the door and the process of installation is opposite to the mentioned procedure. To remove the outside handle, push down on the end of the remote control link which disengages the latch, unscrew the two nuts on the mounting plate and remove the handle from the door. Last but not the least, position the handle, connect the link and fix the nuts properly on to the Link fixed on Link rod.