How to Access the Ambient Air Temperature Sensor on Dodge Magnum?

The ambient temperature sensor is located on the trailing edge of the front bumper, below the right horn. To access it, raise the vehicle and secure it on jackstands. Remove the front splash shield that protects the area under the front part of the engine compartment, right behind the trailing edge of the front bumper cover. Disconnect the electrical connector from the sensor by depressing the tab and pulling off the connector. Then, remove the pushpin and detach the sensor from the bumper. Finally, install the sensor by reversing the removal process.

Genuine Dodge Magnum Ambient Temperature Sensor

Inside Outside Auto Thermometer Gauge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ambient Temperature Sensor found

View related parts
Dodge Magnum Sensor-Ambient Temperature
Part Number: 56042395
$23.33 MSRP: $34.70
You Save: $11.37 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor Ambient Temperature
- Replaced by: 68518243AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Dodge Magnum | R/T AWD, R/T RWD, SE RWD, SRT8 RWD, SXT AWD, SXT RWD | 6 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1L

Dodge Magnum Ambient Temperature Sensor

The Ambient Temperature Sensor also known as Throttle Position Sensor in Dodge Magnum vehicles is a critical component used to measure the air getting to the engine intake. This sensor, in addition to the Mass Air Flow (MAF) sensor sends information to the Powertrain Control Module (PCM) to adjust the correct ratio of air to fuel mixture for combustion. An improperly functioning Ambient Temperature Sensor may cause problems like stalling or a bad air/fuel mixture which will turn ON the CHECK ENGINE light. Dodge Magnum automobiles, automobiles might install MAF and VAF Ambient Temperature Sensors. Both are fixed to quantify relative amounts of airflow and they are custom-built to complement certain fuel injectors. Whereas factory sensors do allow for some performance modifications, large increases in air flow may necessitate the use of a higher quality Ambient Temperature Sensor.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Magnum Ambient Temperature Sensor at great affordable prices. Moreover, all genuine Dodge Magnum Ambient Temperature Sensor come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Magnum Ambient Temperature Sensor Parts Questions & Experts Answers

Sensor-Ambient Temperature
56042395
Q: How to Access the Ambient Air Temperature Sensor on Dodge Magnum?
A: The ambient temperature sensor is located on the trailing edge of the front bumper, below the right horn. To access it, raise the vehicle and secure it on jackstands. Remove the front splash shield that protects the area under the front part of the engine compartment, right behind the trailing edge of the front bumper cover. Disconnect the electrical connector from the sensor by depressing the tab and pulling off the connector. Then, remove the pushpin and detach the sensor from the bumper. Finally, install the sensor by reversing the removal process.

Related Dodge Magnum Parts

Browse by Year

2008 Ambient Temperature Sensor 2007 Ambient Temperature Sensor 2006 Ambient Temperature Sensor 2005 Ambient Temperature Sensor