×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Dodge Magnum Door Lock Cylinder
Door Lock Cylinder Tumbler- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Door Lock Cylinders found
Dodge Magnum Door Lock Cylinder
The Door Lock Cylinder in Dodge Magnum is an important part of the vehicle and is fixed in the front door which locks and unlocks the door using the car key. This mechanism is used for locking system of the vehicle and offers access to the interior cabin of the car. However, the Dodge Magnum Door Lock Cylinder like any other automotive part is subjected to wear and tear and therefore result in some challenge when operated such as a key that cannot turn or sticks. Contrary to today's vehicles, the Dodge Magnum still employs the conventional door lock cylinder which is evidently a critically needed element. The Door Lock Cylinder needs to be maintained often and replaced when necessary so that it works efficiently with no security issues. Being able to identify the signs of wear can alleviate potential problems down the road and make sure that the Dodge Magnum stays safe, and easy to open.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Magnum Door Lock Cylinder at great affordable prices. Moreover, all genuine Dodge Magnum Door Lock Cylinder come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Magnum Door Lock Cylinder Parts Questions & Experts Answers
- Q: How to remove and install a door latch,Door Lock Cylinder and outside door handle on Dodge Magnum?A: Raise the window completely and remove the door trim panel and water shield. Remove the door speaker. Remove the fasteners at the rear glass run channel and move the channel away from the latch (Remove the fasteners securing the pull cup bracket). This provides a little extra working room in the latch area inside the door. Rotate the plastic retaining clips off the rods, then detach the latch links. Disconnect the electrical connector. Remove the three mounting screws (it may be necessary to use an impact-type screwdriver to loosen them), then remove the latch from the door ( Remove the latch mounting screws). Place the latch in position and install the screws. Tighten the screws securely. Connect the link rods and electrical connector to the latch. The remainder of installation is the reverse of removal. Remove the outside door handle. Withdraw the lock cylinder from the door handle. Installation is the reverse of removal. Remove the door trim panel. Remove the door speaker. Remove the fasteners at the rear glass run channel and move the channel away from the latch. This provides a little extra working room in the latch area inside the door. Disconnect the link rods from the outside handle, remove the mounting fasteners and carefully detach the handle from the door. Place the handle in position, attach the link and install the nuts. Tighten the fasteners securely. The remainder of installation is the reverse of removal.
