How to Remove a Tie-Rod End on Dodge Magnum?

Loosen wheel lug nuts and raise vehicle. Apply parking brake and remove wheel. Loosen jam nut and mark tie-rod end. Disconnect tie-rod end from steering knuckle arm using puller. Unscrew and thread new tie-rod end onto marked position. Connect to steering knuckle arm, tighten nut, and install wheel. Lower vehicle and tighten lug nuts. Have front end alignment checked and adjusted.

Genuine Dodge Magnum Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Tie Rod End found

View related parts
Dodge Magnum Tie Rod-Outer
Part Number: 2AMTR468AD
$26.07 MSRP: $36.00
You Save: $9.93 (28%)
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Dodge Magnum | R/T RWD, SE RWD | 6 Cyl 3.5L, 8 Cyl 5.7L

Dodge Magnum Tie Rod End

Dodge Magnum vehicles' Tie Rod End is one of the main links that connect the driver's instructions with the wheel's action. These structural rods are produced to help facilitate forces which may be required and can be altered to fitting the suspension system. The signs of a failing Tie Rod End include loose steering wheel, rattling, and the car swerving all over the place. Some of the measures that can be used to prolong the live of Tie Rod End include the following; inspection of the component often, cleaning and greasing appropriately in addition to replacing the damaged parts as soon as they are detected. Thus, by adhering to these maintenance tips, drivers are assured of their Tie Rod Ends' sound health and, therefore, safe and smooth rides.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Magnum Tie Rod End at great affordable prices. Moreover, all genuine Dodge Magnum Tie Rod End come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Magnum Tie Rod End Parts Questions & Experts Answers

Tie Rod-Outer
2AMTR468AD
Q: How to Remove a Tie-Rod End on Dodge Magnum?
A: Loosen wheel lug nuts and raise vehicle. Apply parking brake and remove wheel. Loosen jam nut and mark tie-rod end. Disconnect tie-rod end from steering knuckle arm using puller. Unscrew and thread new tie-rod end onto marked position. Connect to steering knuckle arm, tighten nut, and install wheel. Lower vehicle and tighten lug nuts. Have front end alignment checked and adjusted.

Related Dodge Magnum Parts

Browse by Year

2005 Tie Rod End