Genuine Dodge Magnum Wheel Hub

Wheel Axle Hub
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wheel Hubs found

  • Dodge Magnum Wheel Hub - 4779199AA
    Diagram for Dodge Magnum Wheel Hub - 4779199AA
    View related parts

    Dodge Magnum Brake Bearing

    Part Number: 4779199AA
    $160.19 MSRP: $243.00
    You Save: $82.81 (35%)
    ADD TO CART
    Product Specifications
    • Other Name: Hub And Bearing Brake; Front Hub & Bearing, Hub & Bearing, Hub Assembly
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following Vehicles:
    • 2005-2008 Dodge Magnum | R/T RWD, SE RWD, SRT8 RWD, SXT RWD | 6 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1L
  • Dodge Magnum Wheel Hub - 4779328AA
    Diagram for Dodge Magnum Wheel Hub - 4779328AA
    View related parts

    Dodge Magnum Wheel Bearing Hub Assembly

    Part Number: 4779328AA
    $258.50 MSRP: $396.00
    You Save: $137.50 (35%)
    ADD TO CART
    Product Specifications
    • Other Name: Hub And Bearing Brake
    • Replaced by: 4779328AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following Vehicles:
    • 2005-2008 Dodge Magnum | R/T AWD, SXT AWD | 6 Cyl 3.5L, 8 Cyl 5.7L
  • Dodge Magnum Wheel Hub - 4779218AB
    Diagram for Dodge Magnum Wheel Hub - 4779218AB
    View related parts

    Dodge Magnum Hub And Bearing

    Part Number: 4779218AB
    $258.50 MSRP: $396.00
    You Save: $137.50 (35%)
    ADD TO CART
    Product Specifications
    • Other Name: Hub And Bearing Brake
    • Replaced by: 4779328AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following Vehicles:
    • 2005-2007 Dodge Magnum | R/T AWD, R/T RWD, SE RWD | 6 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7L

Dodge Magnum Wheel Hub Parts Questions & Experts Answers

  • Q: How to Remove and Replace the rear Hub and Bearing Assembly?
    A: To remove and replace the hub and bearing assembly, raise the rear of the vehicle and remove the wheel, brake caliper and disc, and wheel speed sensor from the steering knuckle. Remove the hub mounting bolts and drive axle/hub nut. If the drive axle sticks, use a puller. Installation is the reverse of removal. Make sure to tighten all bolts and nuts.
  • Q: How to Remove and Install a front Hub and Bearing Assembly?
    A: Loosen wheel lug nuts, raise vehicle, remove wheel, brake disc, and dust cap. Remove hub nut and slide hub off spindle. Reverse steps to install, tightening hub nut, brake caliper bracket, and bolts. Install wheel, lower vehicle, and tighten lug nuts.

Related Dodge Magnum Parts