How do you remove and install a door latch,Door Lock Cylinder and handle on Dodge Neon?

Remove the door trim panel and watershield, then close the window completely. Disconnect the link rods from the latch. For power door lock models, disconnect the electrical connector from the door lock motor. Remove the three mounting screws from the end of the door, using an impact-type screwdriver if necessary, and a Torx-head driver for the door latch screws. Detach the clips from the control rods and remove the latch from the door by unsnapping the clip from the rod and pulling the rod out of the lever. Place the latch in position, install the screws, and tighten them securely. Connect the link rods to the latch. Disconnect the link and electrical connector, remove the lock cylinder clip retainer, and withdraw the lock cylinder from the door handle assembly by pushing off the clip at its base. Installation is the reverse of removal. Disconnect the link, remove the mounting bolts, and detach the handle from the door, which is retained by two bolts. Place the handle in position, attach the links, and install the bolts, tightening them securely.

Genuine Dodge Neon Door Lock Cylinder

Door Lock Cylinder Tumbler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Door Lock Cylinders found

View related parts
Dodge Neon Cylinder Lock
Part Number: 4778125
$66.27 MSRP: $97.95
You Save: $31.68 (33%)
ADD TO CART
Product Specifications
- Other Name: Lock Cylinder; Cylinder & Key, Lock & Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002 Dodge Neon | ACR, Base, ES, R/T, S, SE | 4 Cyl 1.6L, 4 Cyl 2.0L
- 1995-1999 Dodge Neon | 2 Door Base, 2 Door High Line, 2 Door Sport, 4 Door Base, 4 Door High Line, 4 Door Sport | 4 Cyl 2.0L
View related parts
Dodge Neon Cylinder Lock-Door Lock Cylinder
Part Number: 4778149
$10.16 MSRP: $14.70
You Save: $4.54 (31%)
ADD TO CART
Product Specifications
- Other Name: Cap Door Lock Cylinder Bright; Cap
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Dodge Neon | SE, SRT-4, SXT | 4 Cyl 2.0L, 4 Cyl 2.4L
- 1997-2003 Dodge Neon | 2 Door Base, 2 Door High Line, 2 Door Sport, 4 Door Base, 4 Door High Line, 4 Door Sport, ACR, Base, ES, R/T, S, SE, SRT-4, SXT | 4 Cyl 1.6L, 4 Cyl 2.0L, 4 Cyl 2.4L
View related parts
Dodge Neon Cylinder Lock-Door Lock
Part Number: 5011040AA
$59.05 MSRP: $87.30
You Save: $28.25 (33%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Door Lock; Lock Cylinder
- Replaces: 5056182AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Dodge Neon | SE, SRT-4, SXT | 4 Cyl 2.0L, 4 Cyl 2.4L
- 2000-2002 Dodge Neon | 4 Door High Line, ACR, Base, ES, R/T, S, SE | 4 Cyl 1.6L, 4 Cyl 2.0L
View related parts
Dodge Neon Cylinder Lock-DECKLID
Part Number: 4746904
Product Specifications
- Other Name: Lock Cylinder Decklid Black; Lock Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1996 Dodge Neon | 2 Door Base, 2 Door High Line, 2 Door High Line , 2 Door Sport, 4 Door Base, 4 Door High Line, 4 Door Sport | 4 Cyl 2.0L
View related parts
Dodge Neon Cylinder Door Dual Snap Ca
Part Number: 4746928
Product Specifications
- Other Name: Cylinder Lock Package; Lock Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995 Dodge Neon | 2 Door Base, 2 Door High Line , 2 Door Sport, 4 Door Base, 4 Door High Line, 4 Door Sport | 4 Cyl 2.0L
View related parts
Dodge Neon Cylinder Lock-Deck Lid Lock
Part Number: 4778146
Product Specifications
- Other Name: Cylinder Deck Lid Lock
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2003 Dodge Neon | 2 Door Base, 2 Door High Line, 4 Door Base, 4 Door High Line, ACR, Base, ES, R/T, S, SE, SRT-4, SXT | 4 Cyl 1.6L, 4 Cyl 2.0L, 4 Cyl 2.4L
- 1995 Dodge Neon | 2 Door Base, 2 Door High Line, 2 Door Sport, 4 Door Base, 4 Door High Line, 4 Door Sport | 4 Cyl 2.0L

Dodge Neon Door Lock Cylinder

The Door Lock Cylinder in Dodge Neon vehicles is an important part of the cars which is fixed in the front door to lock and unlock the doors with the help of the car key. It affords ease of use in terms of accessing the compartmentalized interior of the vehicle while at the same time offering adequate security. With constant usage, there are high chances that the Dodge Neon Door Lock Cylinder degrades, sometimes making it hard to lock or unlock the doors while creating this possibility of the key to be stuck. Nevertheless, the presence of door lock cylinders has been kept with the Dodge Neon, and the form of buttons and their capabilities can be slightly changed from model release to model release. It is therefore important to ensure that the Dodge Neon's Door Lock Cylinder is well maintained and replaced on time so as to avoid problems that relate to a worn lock.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Neon Door Lock Cylinder at great affordable prices. Moreover, all genuine Dodge Neon Door Lock Cylinder come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Neon Door Lock Cylinder Parts Questions & Experts Answers

Cylinder Lock-Door Lock Cylinder
4778149
Q: How do you remove and install a door latch,Door Lock Cylinder and handle on Dodge Neon?
A: Remove the door trim panel and watershield, then close the window completely. Disconnect the link rods from the latch. For power door lock models, disconnect the electrical connector from the door lock motor. Remove the three mounting screws from the end of the door, using an impact-type screwdriver if necessary, and a Torx-head driver for the door latch screws. Detach the clips from the control rods and remove the latch from the door by unsnapping the clip from the rod and pulling the rod out of the lever. Place the latch in position, install the screws, and tighten them securely. Connect the link rods to the latch. Disconnect the link and electrical connector, remove the lock cylinder clip retainer, and withdraw the lock cylinder from the door handle assembly by pushing off the clip at its base. Installation is the reverse of removal. Disconnect the link, remove the mounting bolts, and detach the handle from the door, which is retained by two bolts. Place the handle in position, attach the links, and install the bolts, tightening them securely.