×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Dodge Neon Hood Latch
Engine Hood Latch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Hood Latches found
Dodge Neon Hood Latch
While it is vital, the only function of the Hood Latch of Dodge Neon cars is to give access to the hood of the car. This mechanism allows the driver to open the hood more often for check ups as well as repairs. Proper care must be taken as failure of this hood latch to hold well can cause the hoods to be forc ed open which in turn will cause damage to the hoods and any other part which this hood covers. Dodge Neon have commonly an internal hood latch situated at the right area of the driver's seat below the steering wheel. There is this wrench which helps open the hood somewhat, and you should not use the force when unlocking it since it has a little cable which may break. Implementing regular maintenance will go a long way in preventing rust in new condition and applying penetrating oil on the hood latch will keep the Dodge Neon roadworthy for longer.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Neon Hood Latch at great affordable prices. Moreover, all genuine Dodge Neon Hood Latch come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Neon Hood Latch Parts Questions & Experts Answers
- Q: How do you replace the hood release cable and Hood Latch on Dodge Neon?A: Open the Hood and support it on the prop rod. Remove the radiator Grille. Detach the latch assembly by removing the nuts, then disconnect the release cable from the hood latch. In the passenger compartment, remove the left front kick panel and the bolts securing the hood release handle, moving the handle away from the cowl panel. Under the dash, take out the cable grommet from the firewall. Connect a piece of heavy string or flexible wire to the engine compartment end of the cable, then pull the release cable and wire through the firewall into the passenger compartment, disconnecting the string or wire from the old cable. Attach the string or wire to the new cable and pull it through the firewall into the engine compartment. The remainder of the installation is the reverse of removal, ensuring the grommet seats properly in the firewall.
