×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Dodge Neon Wheel Hub
Wheel Axle Hub- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
11 Wheel Hubs found
Dodge Neon Drivestar Front Driver/Passenger Side Wheel Hub
Part Number: 4670292AC$135.51 MSRP: $200.00You Save: $64.49 (33%)
Dodge Neon Wheel Hub
The Wheel Hub of Dodge Neon vehicles is an important component that connects the wheels and the vehicle maintaining safety and allowing the wheels to spin. It holds sub assemblies of wheels such as wheel bearings and brake system which plays an important role in vehicle performance and steering. Dodge Neon comes with different Wheel Hub styles, and each of them has its own bolt circular locations and dimensions that correspond to the model's needs. It is essential when fixing a Dodge Neon to opt for a Wheel Hub that offered as an exact fit so that it will function as required. The assembly is often provided with splined teeth for the power and roller bearing for the rotation. It is therefore important to have adequate knowledge of these differences in Wheel Hub designs so as to enhance safety and reliability in the Dodge Neon vehicles.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Neon Wheel Hub at great affordable prices. Moreover, all genuine Dodge Neon Wheel Hub come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Neon Wheel Hub Parts Questions & Experts Answers
- Q: How to remove and install a wheel and hub assembly on Dodge Neon?A: Lose the wheel lug nuts, lift the car off the ground, and place it on a jackstand and only then remove the wheel. If models have rear drum brakes, then remove the drum; if the models have rear disc brakes, then it is required to remove the caliper and the brake disc. Take the following illustrations to take off the hub and bearing assembly where there is the dust cap, the mounting nut and finally the hub and bearing assembly. The process of installation is the complete opposite of the removal process noting to apply wheel bearing grease on the spindle end of the outboard hub and tighten the hub-to-spindle nut to the amount of torque. Then put back the brake drum/disc and caliper; later, the wheel and the wheel lug nuts should also be installed. At last, turn down the vehicle and then one more time having a torque wrench tighten the lug nuts with the indicated torque.
