How to Replace the Coolant Expansion Tank on Dodge Nitro?

To replace the coolant expansion tank, begin by draining the cooling system and disconnecting the hoses from the tank. For four-cylinder models, remove the tank by taking off the mounting nuts from the firewall. For V6 models with a non-pressurized tank, disconnect the battery cable and remove the fasteners to detach the coolant/windshield washer reservoir assembly from the radiator support. For pressurized, remove the expansion tank by taking off the bracket nuts. Finally, reinstall the tank and refill the cooling system.

Genuine Dodge Nitro Coolant Reservoir

Coolant Tank Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Coolant Reservoirs found

View related parts
Dodge Nitro Bottle-COOLANT Reserve & Washer Fl
Part Number: 68004868AA
$159.50 MSRP: $330.00
You Save: $170.50 (52%)
ADD TO CART
Product Specifications
- Other Name: Bottle Coolant Reserve & Washer Fluid
- Replaced by: 68004868AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Dodge Nitro | SLT 2WD, SLT 4WD, SXT 2WD, SXT 4WD | 6 Cyl 3.7L, 6 Cyl 4.0L
View related parts
Dodge Nitro Bottle-Washer And COOLANT
Part Number: 68004868AC
$222.22 MSRP: $330.00
You Save: $107.78 (33%)
ADD TO CART
Product Specifications
- Other Name: Reservoir Washer and Coolant; Reservoir, Reservoir Tank
- Replaces: 68004868AA, 68004868AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator 2WD, Detonator 4WD, Heat 2WD, Heat 4WD, SE 2WD, SE 4WD, SLT 2WD, SLT 4WD, SXT 2WD, SXT 4WD, Shock 2WD, Shock 4WD | 6 Cyl 3.7L, 6 Cyl 4.0L
View related parts
Dodge Nitro Bottle-PRESSURIZED COOLANT
Part Number: 55037842AD
Product Specifications
- Other Name: Bottle Pressurized Coolant
- Replaced by: 55037842AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Dodge Nitro | SLT 2WD, SLT 4WD

Dodge Nitro Coolant Reservoir

The Coolant Reservoir that is used in Dodge Nitro cars, is an important part of the engine cooling system with the purpose of controlling the extra coolant fluid and at the same time also preventing air from getting inside the system. This prevent formation of rust and corrosion in cooling parts which if happens may result in emission of dangerous antifreeze. The Dodge Nitro utilizes two primary types of Coolant Reservoirs: There are two kinds of tanks, namely, overflow tank systems and expansion tank systems. On the overflow system, the pressure cap will be mounted on the radiator and it lets coolant be collected in a different tank whenever pressure surpasses the capacity of the cap. On the other hand the expansion tank system helps in holding a pressure cap on the tank which is made to withstand the pressure due to coolant expansion and contraction. the Coolant Reservoir of Dodge Nitro should be inspected from time to time to see that it is not cracking or leaking which may call for replacement of the whole car if badly affected.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Nitro Coolant Reservoir at great affordable prices. Moreover, all genuine Dodge Nitro Coolant Reservoir come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Nitro Coolant Reservoir Parts Questions & Experts Answers

Bottle-Washer And COOLANT
68004868AC
Q: How to Replace the Coolant Expansion Tank on Dodge Nitro?
A: To replace the coolant expansion tank, begin by draining the cooling system and disconnecting the hoses from the tank. For four-cylinder models, remove the tank by taking off the mounting nuts from the firewall. For V6 models with a non-pressurized tank, disconnect the battery cable and remove the fasteners to detach the coolant/windshield washer reservoir assembly from the radiator support. For pressurized, remove the expansion tank by taking off the bracket nuts. Finally, reinstall the tank and refill the cooling system.