How to Replace the Brake Light Switch on Dodge Ram 1500?

Disconnect the cable(s) from the negative battery terminal(s). The switch is mounted at the brake pedal, so disconnect the wiring from the switch. Hold the brake pedal down, then turn the switch slightly clockwise and pull it from its bracket. On early 2009 models, the switch must be replaced with a new one whenever it's removed. Let up the brake pedal. For early 2009 models, hold the brake pedal down and insert the new switch into its bracket until it's properly seated, then turn it counterclockwise to lock it in place. Let go of the brake pedal, but don't pull it up. Turn the plunger release lever clockwise until it snaps into place. Make sure the switch is seated properly before moving the lever. If an error is made, the switch will have to be discarded and replaced with a new one. Connect the wiring harness and the battery cable(s). For late 2009 and later models, verify that the switch plunger is completely extended. Hold the brake pedal down and install the switch into its bracket, seating it fully. Turn the switch clockwise to lock it in place. Let go of the brake pedal to allow the switch to adjust itself. Connect the wiring harness and the battery cable(s).

Genuine Dodge Ram 1500 Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Brake Light Switches found

View related parts
Dodge Ram 1500 Switch-Stop Lamp
Part Number: 4671336
$24.26 MSRP: $33.25
You Save: $8.99 (28%)
ADD TO CART
Product Specifications
- Other Name: Switch Stop Lamp
- Replaced by: 4671336AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-1998 Dodge Ram 1500 | Club Cab 2WD, Club Cab 4WD, Club Cab 6FT BOX 2WD, Club Cab 6FT BOX 4WD, Club Cab 8FT BOX 2WD, Club Cab 8FT BOX 4WD, Quad Cab 2WD, Quad Cab 4WD, Regular Cab 2WD, Regular Cab 4WD, Regular Cab 6FT BOX 2WD, Regular Cab 6FT BOX 4WD, Regular Cab 8FT BOX 2WD, Regular Cab 8FT BOX 4WD | 6 Cyl 3.9L, 8 Cyl 5.2L, 8 Cyl 5.9L
View related parts
Dodge Ram 1500 Switch-Stop Lamp
Part Number: 56038914AA
$23.62 MSRP: $34.85
You Save: $11.23 (33%)
ADD TO CART
Product Specifications
- Other Name: Switch Stop Lamp
- Replaced by: 56038914AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 1500 | Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Quad Cab 2WD, Laramie Quad Cab 4WD, SLT Crew CAB 2WD, SLT Crew Cab 4WD, SLT HEV Crew Cab 4WD, SLT Quad Cab 2WD, SLT Quad Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Quad Cab 2WD, ST Quad Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD | 6 Cyl 3.7L, 8 Cyl 4.7L, 8 Cyl 5.7L
View related parts
Dodge Ram 1500 Switch-Parking Brake
Part Number: 4221463
$13.60 MSRP: $20.15
You Save: $6.55 (33%)
ADD TO CART
Product Specifications
- Other Name: Switch Parking Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2010 Dodge Ram 1500 | Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Quad Cab 2WD, Laramie Quad Cab 4WD, Laramie Regular Cab 2WD, Laramie Regular Cab 4WD, Quad Cab 2WD, Quad Cab 4WD, Regular Cab 2WD, Regular Cab 4WD, SLT Crew CAB 2WD, SLT Crew Cab 4WD, SLT HEV Crew Cab 4WD, SLT Quad Cab 2WD, SLT Quad Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, SRT-10 Quad Cab 2WD, SRT-10 Regular Cab 2WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Quad Cab 2WD, ST Quad Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD | 10 Cyl 8.3L, 6 Cyl 3.7L, 8 Cyl 4.7L, 8 Cyl 5.7L, 8 Cyl 5.9L
- 1994-1996 Dodge Ram 1500 | 3-Person Cab 2WD, 3-Person Cab 4WD, Club Cab 2WD, Club Cab 4WD, Regular Cab 2WD, Regular Cab 4WD | 6 Cyl 3.9L, 8 Cyl 5.2L, 8 Cyl 5.9L
View related parts
Dodge Ram 1500 Sw Pkg-Stop Lamp
Part Number: 5083344AA
$26.76 MSRP: $37.80
You Save: $11.04 (30%)
ADD TO CART
Product Specifications
- Other Name: Switch Package Stop Lamp
- Replaces: 56045043AE, 56045043AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2009 Dodge Ram 1500 | Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Quad Cab 2WD, Laramie Quad Cab 4WD, Laramie Regular Cab 2WD, Laramie Regular Cab 4WD, Quad Cab 2WD, Quad Cab 4WD, Regular Cab 2WD, Regular Cab 4WD, SLT Crew CAB 2WD, SLT Crew Cab 4WD, SLT Quad Cab 2WD, SLT Quad Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, SRT-10 Quad Cab 2WD, SRT-10 Regular Cab 2WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Quad Cab 2WD, ST Quad Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD | 10 Cyl 8.3L, 6 Cyl 3.7L, 6 Cyl 3.9L, 8 Cyl 4.7L, 8 Cyl 5.2L, 8 Cyl 5.7L, 8 Cyl 5.9L
View related parts
Dodge Ram 1500 Sw Pkg-Stop Lamp
Part Number: 5016294AA
$24.95 MSRP: $36.20
You Save: $11.25 (32%)
ADD TO CART
Product Specifications
- Other Name: Switch Package Stop Lamp
- Replaced by: 5016294AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999 Dodge Ram 1500 | Club Cab 2WD, Club Cab 4WD, Quad Cab 2WD, Quad Cab 4WD, Regular Cab 2WD, Regular Cab 4WD | 6 Cyl 3.9L, 8 Cyl 5.2L, 8 Cyl 5.9L
View related parts
Dodge Ram 1500 Sw Pkg-Stop Lamp
Part Number: 5016294AB
Product Specifications
- Other Name: Switch Package Stop Lamp
- Replaced by: 5016294AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2001 Dodge Ram 1500 | Club Cab 2WD, Club Cab 4WD, Quad Cab 2WD, Quad Cab 4WD, Regular Cab 2WD, Regular Cab 4WD | 6 Cyl 3.9L, 8 Cyl 5.2L, 8 Cyl 5.9L
View related parts
Dodge Ram 1500 Switch-Stop Lamp
Part Number: 56045043AC
Product Specifications
- Other Name: Switch Stop Lamp
- Replaced by: 5016294AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001 Dodge Ram 1500 | Club Cab 2WD, Club Cab 4WD, Quad Cab 2WD, Quad Cab 4WD | 8 Cyl 5.2L, 8 Cyl 5.9L
- 1999 Dodge Ram 1500 | Club Cab 2WD, Club Cab 4WD, Quad Cab 2WD, Quad Cab 4WD, Regular Cab 2WD, Regular Cab 4WD | 6 Cyl 3.9L, 8 Cyl 5.2L, 8 Cyl 5.9L

Dodge Ram 1500 Brake Light Switch

The Brake Light Switch in Dodge Ram 1500 is very important in that it is used to switch on the brake lamps whenever the brake pedal is pressed. In addition, this mechanism helps to notify the drivers behind the Dodge Ram 1500 that the car is slowing down or is coming to a standstill, thus increasing safety on the road. Different types of Brake Light Switch have been used in Dodge ram 1500 throughout the years though it is not easy to understand differences between such types. Regardless of the style, the primary goal remains consistent: To give clear indications to other motorists and reduce the level of risks in driving. For proper functioning of the lighting system of Dodge Ram 1500, the efficient working of the Brake Light Switch is very compulsory.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Ram 1500 Brake Light Switch at great affordable prices. Moreover, all genuine Dodge Ram 1500 Brake Light Switch come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Ram 1500 Brake Light Switch Parts Questions & Experts Answers

Switch-Parking Brake
4221463
Q: How to Replace the Brake Light Switch on Dodge Ram 1500?
A: Disconnect the cable(s) from the negative battery terminal(s). The switch is mounted at the brake pedal, so disconnect the wiring from the switch. Hold the brake pedal down, then turn the switch slightly clockwise and pull it from its bracket. On early 2009 models, the switch must be replaced with a new one whenever it's removed. Let up the brake pedal. For early 2009 models, hold the brake pedal down and insert the new switch into its bracket until it's properly seated, then turn it counterclockwise to lock it in place. Let go of the brake pedal, but don't pull it up. Turn the plunger release lever clockwise until it snaps into place. Make sure the switch is seated properly before moving the lever. If an error is made, the switch will have to be discarded and replaced with a new one. Connect the wiring harness and the battery cable(s). For late 2009 and later models, verify that the switch plunger is completely extended. Hold the brake pedal down and install the switch into its bracket, seating it fully. Turn the switch clockwise to lock it in place. Let go of the brake pedal to allow the switch to adjust itself. Connect the wiring harness and the battery cable(s).