×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Dodge Ram 1500 Steering Wheel
Navigation Steering Wheel- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
53 Steering Wheels found
| Page 1 of 3 |Next >
1-20 of 53 Results
Dodge Ram 1500 Steering Wheel
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Ram 1500 Steering Wheel at great affordable prices. Moreover, all genuine Dodge Ram 1500 Steering Wheel come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Ram 1500 Steering Wheel Parts Questions & Experts Answers
- Q: How to Remove the Steering Wheel on Dodge Ram 1500?A: To remove the airbag module, start by parking the vehicle with the front wheels straight. Disconnect the negative battery terminal(s) and wait for the electrical system to discharge. Remove the upper steering column cover and lower the steering column fully. Turn the steering wheel to bring each of the three airbag retaining clips to the top position, then use a small screwdriver to pry and release them. Pull the airbag module out enough to reach the wiring harnesses at the rear and carefully disconnect them. Lift off the airbag module. Remove the steering wheel bolt and mark the relationship of the steering wheel to the steering shaft. Use a jaw-type puller to remove the steering wheel, detaching the wires and feeding them through the wheel as you remove it. If necessary, unplug the electrical connector for the clockspring and remove the screws to lift it from the steering column. When installing the clockspring, ensure it is centered with the arrows on the rotor and case lined up. Installation is the reverse of removal, making sure the clockspring is centered before installing the steering wheel. Align the marks on the shaft and steering wheel hub, install a new steering wheel bolt, and tighten it. Finally, enable the airbag system.
