×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Jeep Wagoneer Sway Bar Kit
Stabilizer Sway Bar Set- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
9 Sway Bar Kits found
Jeep Wagoneer Sway Bar Kit
The Sway Bar Kit on Jeep Wagoneer models is used to improve on the handling of the vehicle as it links opposite ends of the suspensions. This kit decreases the lateral movement of weight whilst cornering and where surfaces are irregular; hence increasing stability. The anti-roll bar is a component of the Sway Bar Kit; it uses a torsion spring to raise the roll stiffness without affecting the vertical spring rate resulting in reduced sideways tilt and better grip on the road. Sway Bar kits have been used in the Jeep Wagoneer vehicles in different generations, with development being made on features as adjustable and active anti-roll bars. These modern systems can add variable stiffness, enabling better handling and presumably, the better ride, as specified, in adverse driving conditions. The conventional type of sway bars enhances the stability and handling of the car but it goes to the extent of transferring bumps between the wheels in case of the rough roads.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Wagoneer Sway Bar Kit at great affordable prices. Moreover, all genuine Jeep Wagoneer Sway Bar Kit come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Jeep Wagoneer Sway Bar Kit Parts Questions & Experts Answers
- Q: How do you remove and install a rear stabilizer bar on a Jeep Wagoneer?A: To remove the sway bar kit, raise the rear of the vehicle and support it securely on jack stands. Then, unbolt the sway bar link at the spring tie plate and remove the kit. Inspect the brackets and bushings for wear and replace them if necessary. To install the sway bar kit, push the bushings and brackets onto the bar, position it against the frame, install the bracket bolts, and tighten them securely. Finally, connect the links to the spring tie plates and tighten them securely.
