×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Jeep Wagoneer Wheel Cylinder
Brake Wheel Cylinder- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Wheel Cylinders found
Jeep Wagoneer Wheel Cylinder
In Jeep Wagoneer brands, the Wheel Cylinder is a vital component that offer hydraulic pressure to make the brake shoes push against the brake drum to allow the car togradually stop. The principal element consists of a body with pistons and rubber gaskets; when the brake pressure is applied, they are displaced and try and make the shoes touch the drum. Others employ dual single piston cylinder to accomplish the same task Their mechanisms of operation are also slightly different. Earlier, wheel cylinders were manufactured from cast iron, but new varieties are manufactured from aluminum to avoid rusting. Wheel cylinders can wear out and, therefore, develop small or large leaks that may reduce the braking capacity of the car; however, they are relatively cheap and can be reconditioned or replaced to guarantee that the vehicle will stop as required for safety.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Wagoneer Wheel Cylinder at great affordable prices. Moreover, all genuine Jeep Wagoneer Wheel Cylinder come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Jeep Wagoneer Wheel Cylinder Parts Questions & Experts Answers
- Q: How to rebuild a wheel cylinder on Jeep Wagoneer?A: New wheel cylinders are available, which makes this job quite easy. If it's decided to rebuild the wheel cylinder, make sure that a rebuild kit is available before proceeding. Never overhaul only one wheel cylinder always rebuild both of them at the same time. Raise the rear of the vehicle and support it securely on jackstands. Block the front wheels to keep the vehicle from rolling. Remove the brake shoe assembly. Remove all dirt and foreign material from around the wheel cylinder. Completely loosen the Brake Line fitting, then remove the two wheel cylinder mounting bolts. Don't pull the brake line away from the wheel cylinder. Remove the wheel cylinder mounting bolts. Detach the wheel cylinder from the brake backing plate and place it on a clean work bench. Immediately plug the brake line to prevent fluid loss and contamination. If the brake shoe linings are contaminated with brake fluid, install new brake shoes. Remove the bleeder screw, piston cups, pistons, boots and expander assembly from the wheel cylinder body. Clean the wheel cylinder with brake fluid or brake system cleaner. Use compressed air to remove excess fluid from the wheel cylinder and to blow out the passages. Check the cylinder bore for corrosion and score marks. Crocus cloth can be used to remove light corrosion and stains, but the cylinder must be replaced with a new one if the defects cannot be removed easily, or if the bore is scored. Lubricate the new cups with brake fluid. Assemble the wheel cylinder components. Make sure the recessed sides of the cups face in. Place the wheel cylinder in position and install the bolts. Connect the brake line and tighten the fitting. Install the brake shoe assembly. Bleed the brakes. Check brake operation before driving the vehicle in traffic.
