How to Replace the Brake Light Switch on Ram 1500?

Disconnect the cable(s) from the negative battery terminal(s). The switch is mounted at the brake pedal, so disconnect the wiring from the switch. Hold the brake pedal down, then turn the switch slightly clockwise and pull it from its bracket. On early 2009 models, the switch must be replaced with a new one whenever it's removed. Let up the brake pedal. For early 2009 models, hold the brake pedal down and insert the new switch into its bracket until it's properly seated, then turn it counterclockwise to lock it in place. Let go of the brake pedal, but don't pull it up. Turn the plunger release lever clockwise until it snaps into place. Make sure the switch is seated properly before moving the lever. If an error is made, the switch will have to be discarded and replaced with a new one. Connect the wiring harness and the battery cable(s). For late 2009 and later models, verify that the switch plunger is completely extended. Hold the brake pedal down and install the switch into its bracket, seating it fully. Turn the switch clockwise to lock it in place. Let go of the brake pedal to allow the switch to adjust itself. Connect the wiring harness and the battery cable(s).

Genuine Ram 1500 Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Light Switches found

View related parts
Ram 1500 Switch-Stop Lamp
Part Number: 56038914AA
$23.62 MSRP: $34.85
You Save: $11.23 (33%)
ADD TO CART
Product Specifications
- Other Name: Switch Stop Lamp
- Replaced by: 56038914AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ram 1500 | Laramie Crew Cab 4WD, Laramie Quad Cab 4WD, Longhorn Crew Cab 4WD, SLT Crew Cab 4WD, SLT HEV Crew Cab 4WD, SLT HEV Plus Crew 4WD, SLT Quad Cab 4WD, SLT Regular Cab 4WD, Sport Crew CAB 4WD, Sport Quad Cab 4WD, Sport Regular Cab 4WD, ST Crew Cab 4WD, ST Quad Cab 4WD, ST Regular Cab 4WD | 8 Cyl 4.7L, 8 Cyl 5.7L
View related parts
Ram 1500 Switch-Parking Brake
Part Number: 4221463
$13.60 MSRP: $20.15
You Save: $6.55 (33%)
ADD TO CART
Product Specifications
- Other Name: Switch Parking Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2018 Ram 1500 | HFE Quad Cab 2WD, HFE Reg Cab 2WD, HFE Regular Cab 2WD, Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Quad Cab 2WD, Laramie Quad Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Rebel 2WD, Rebel 4WD, SLT Crew Cab 2WD, SLT Crew CAB 2WD, SLT Crew Cab 4WD, SLT HEV Crew Cab 4WD, SLT HEV Plus Crew 4WD, SLT Quad Cab 2WD, SLT Quad Cab 4WD, SLT Reg Cab 2WD, SLT Reg Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, Sport Crew Cab 2WD, Sport Crew Cab 4WD, Sport Crew CAB 4WD, Sport Quad Cab 2WD, Sport Quad Cab 4WD, Sport Reg Cab 2WD, Sport Reg Cab 4WD, Sport Regular Cab 2WD, Sport Regular Cab 4WD, SSV Crew Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Quad Cab 2WD, ST Quad Cab 4WD, ST Reg Cab 2WD, ST Reg Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD | 6 Cyl 3.0L Diesel, 6 Cyl 3.6L, 8 Cyl 4.7L, 8 Cyl 5.7L
View related parts
Ram 1500 Sensor-Brake Pedal
Part Number: 68078700AE
$28.62 MSRP: $39.10
You Save: $10.48 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor Brake Pedal; Stoplamp Switch
- Replaces: 68078700AD, 68078700AB, 68078700AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ram 1500 | HFE Quad Cab 2WD, HFE Reg Cab 2WD, HFE Regular Cab 2WD, Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Quad Cab 2WD, Laramie Quad Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Rebel 2WD, Rebel 4WD, SLT Crew CAB 2WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Quad Cab 2WD, SLT Quad Cab 4WD, SLT Reg Cab 2WD, SLT Reg Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, SSV Crew Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Quad Cab 2WD, ST Quad Cab 4WD, ST Reg Cab 2WD, ST Reg Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD, Sport Crew CAB 4WD, Sport Crew Cab 2WD, Sport Crew Cab 4WD, Sport Quad Cab 2WD, Sport Quad Cab 4WD, Sport Reg Cab 2WD, Sport Reg Cab 4WD, Sport Regular Cab 2WD, Sport Regular Cab 4WD, Tradesman Crew Cab 2WD, Tradesman Crew Cab 4WD, Tradesman Quad Cab 2WD, Tradesman Quad Cab 4WD, Tradesman Reg Cab 2WD, Tradesman Reg Cab 4WD | 6 Cyl 3.0L Diesel, 6 Cyl 3.6L, 8 Cyl 4.7L, 8 Cyl 5.7L
View related parts
Ram 1500 Sensor-Brake Pedal
Part Number: 68340480AB
$41.82 MSRP: $61.65
You Save: $19.83 (33%)
ADD TO CART
Product Specifications
- Other Name: Stoplamp Switch
- Replaces: 68340480AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2019-2020 Ram 1500 | Bighorn/Lonestar Crew 2WD, Bighorn/Lonestar Crew 4WD, Bighorn/Lonestar Quad 2WD, Bighorn/Lonestar Quad 4WD, HFE Quad Cab 2WD, Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Quad Cab 2WD, Laramie Quad Cab 4WD, Limited Crew Cab 2WD, Limited Crew Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Rebel Crew Cab 2WD, Rebel Crew Cab 4WD, Rebel Quad Cab 4WD, Tradesman Crew Cab 2WD, Tradesman Crew Cab 4WD, Tradesman Quad Cab 2WD, Tradesman Quad Cab 4WD | 6 Cyl 3.0L Diesel, 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Ram 1500 Sensor-Brake Pedal
Part Number: 68339352AB
$41.82 MSRP: $61.65
You Save: $19.83 (33%)
ADD TO CART
Product Specifications
- Other Name: Stoplamp Switch
- Replaces: 68339352AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2019-2020 Ram 1500 | Bighorn/Lonestar Crew 2WD, Bighorn/Lonestar Crew 4WD, Bighorn/Lonestar Quad 2WD, Bighorn/Lonestar Quad 4WD, HFE Quad Cab 2WD, Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Quad Cab 2WD, Laramie Quad Cab 4WD, Limited Crew Cab 2WD, Limited Crew Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Rebel Crew Cab 2WD, Rebel Crew Cab 4WD, Rebel Quad Cab 4WD, Tradesman Crew Cab 2WD, Tradesman Crew Cab 4WD, Tradesman Quad Cab 2WD, Tradesman Quad Cab 4WD | 6 Cyl 3.0L Diesel, 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Ram 1500 Brake Pedal
Part Number: 68493444AA
$39.67 MSRP: $58.55
You Save: $18.88 (33%)
ADD TO CART
Product Specifications
- Other Name: Stoplamp Switch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2024 Ram 1500 | Bighorn/Lonestar Crew 2WD, Bighorn/Lonestar Crew 4WD, Bighorn/Lonestar Quad 2WD, Bighorn/Lonestar Quad 4WD, HFE Crew Cab 2WD, HFE Quad Cab 2WD, Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Quad Cab 2WD, Laramie Quad Cab 4WD, Limited Crew Cab 2WD, Limited Crew Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Rebel Crew Cab 2WD, Rebel Crew Cab 4WD, Rebel Quad Cab 4WD, TRX Crew Cab 4WD, Tradesman Crew Cab 2WD, Tradesman Crew Cab 4WD, Tradesman Quad Cab 2WD, Tradesman Quad Cab 4WD | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.0L Diesel, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L

Ram 1500 Brake Light Switch

Brake Light Switch in Ram 1500 plays a significant role of turn on the brake lights whenever the brake pedal is pressed. This mechanism means that drivers behind the Ram 1500 are able to be informed that the car being behind is slowing, or coming to stop an aspect that makes it safer on the road. There has been the use of different types of Brake Light Switch over the year in Ram 1500 although specific type has not been explained. The primary use of the switch once again is to inform other vehicle operators of the braking actions and this stays constant for all the models of the Ram 1500. As the Brake Light Switch plays an important role in the operation of the car's braking system it is important to ensure the Brake Light Switch is effective in its role of ensuring that drivers do not drive at high speeds and maintain safe distance from the car in front.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Ram 1500 Brake Light Switch at great affordable prices. Moreover, all genuine Ram 1500 Brake Light Switch come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Ram 1500 Brake Light Switch Parts Questions & Experts Answers

Switch-Stop Lamp
56038914AA
Q: How to Replace the Brake Light Switch on Ram 1500?
A: Disconnect the cable(s) from the negative battery terminal(s). The switch is mounted at the brake pedal, so disconnect the wiring from the switch. Hold the brake pedal down, then turn the switch slightly clockwise and pull it from its bracket. On early 2009 models, the switch must be replaced with a new one whenever it's removed. Let up the brake pedal. For early 2009 models, hold the brake pedal down and insert the new switch into its bracket until it's properly seated, then turn it counterclockwise to lock it in place. Let go of the brake pedal, but don't pull it up. Turn the plunger release lever clockwise until it snaps into place. Make sure the switch is seated properly before moving the lever. If an error is made, the switch will have to be discarded and replaced with a new one. Connect the wiring harness and the battery cable(s). For late 2009 and later models, verify that the switch plunger is completely extended. Hold the brake pedal down and install the switch into its bracket, seating it fully. Turn the switch clockwise to lock it in place. Let go of the brake pedal to allow the switch to adjust itself. Connect the wiring harness and the battery cable(s).