×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Ram 2500 Brake Caliper
Caliper- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
22 Brake Calipers found
| Page 1 of 2 |Next >
1-20 of 22 Results
Ram 2500 Brake Caliper
The Brake Caliper found in Ram 2500 has the responsibility of translating hydraulic pressure exerted on it by master cylinder into mechanical force for the purpose of braking. This force is must to press the brake pads onto the rotors, thus slowing or stopping the operation of vehicle. Ram 2500 Brake Calipers can be categorized into two primary types: There are the fixed and floating types. Fixed actuators comprise a set of multiple pistons on either side of the rotor and apply pressure uniformly on it while the floating actuators comprise pistons on one side of the rotor only that slides to clamp the rotor when brakes are applied. Since its production, Ram 2500 has been produced in different generations of Brake Caliper, some of which are performance, boosting its ability to stop and its looks. Original equipment calipers are designed to function while driving a vehicle but performance calipers are better equipped in providing the functionality and the ability to endure the test of time making them ideal for performance driven vehicles. Maintenance and inspection of Brake Caliper are very important to avoid problems like mismatched pad wear, and brake drag when it is installed in Ram 2500 vehicles.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Ram 2500 Brake Caliper at great affordable prices. Moreover, all genuine Ram 2500 Brake Caliper come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Ram 2500 Brake Caliper Parts Questions & Experts Answers
- Q: How to Remove and Install a Disc Brake Caliper on Ram 2500?A: This procedure applies to the front and rear disc brake calipers. To begin, loosen the front or rear wheel lug nuts and raise the vehicle, securing it on jackstands. Block the wheels at the opposite end and remove the front or rear wheel. Next, remove the brake hose-to-caliper banjo bolt and disconnect the brake hose from the caliper. Remember to discard the old sealing washers and plug the brake hose immediately to prevent contaminants and air from entering the brake system. If you are only removing the caliper for access to other components, leave the brake hose connected and suspend the caliper with a length of wire, ensuring it does not hang by the hose. Remove the caliper mounting bolts and detach the caliper from the mounting bracket. When installing, use new sealing washers on each side of the brake hose fitting and tighten the banjo bolt and caliper mounting bolts. Finally, bleed the brake system if the brake hose was disconnected, checking for leaks and testing the brakes before returning the vehicle to normal service.
