How to Replace the Brake Light Switch on Ram 2500?

Disconnect the cable(s) from the negative battery terminal(s). The switch is mounted at the brake pedal, so disconnect the wiring from the switch. Hold the brake pedal down, then turn the switch slightly clockwise and pull it from its bracket. On early 2009 models, the switch must be replaced with a new one whenever it's removed. Let up the brake pedal. For early 2009 models, hold the brake pedal down and insert the new switch into its bracket until it's properly seated, then turn it counterclockwise to lock it in place. Let go of the brake pedal, but don't pull it up. Turn the plunger release lever clockwise until it snaps into place. Make sure the switch is seated properly before moving the lever. If an error is made, the switch will have to be discarded and replaced with a new one. Connect the wiring harness and the battery cable(s). For late 2009 and later models, verify that the switch plunger is completely extended. Hold the brake pedal down and install the switch into its bracket, seating it fully. Turn the switch clockwise to lock it in place. Let go of the brake pedal to allow the switch to adjust itself. Connect the wiring harness and the battery cable(s).

Genuine Ram 2500 Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Light Switches found

View related parts
Ram 2500 Switch-Stop Lamp
Part Number: 56038914AA
$23.62 MSRP: $34.85
You Save: $11.23 (33%)
ADD TO CART
Product Specifications
- Other Name: Switch Stop Lamp
- Replaced by: 56038914AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ram 2500 | Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 2WD, Longhorn Mega Cab 4WD, Power Wagon Crew Cab 4WD, Powerwagon Crew Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD | 6 Cyl 6.7L Diesel, 8 Cyl 5.7L
View related parts
Ram 2500 Switch-Parking Brake
Part Number: 4221463
$13.60 MSRP: $20.15
You Save: $6.55 (33%)
ADD TO CART
Product Specifications
- Other Name: Switch Parking Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Ram 2500 | Big Horn Crew Cab 2WD, Big Horn Crew Cab 4WD, Big Horn Mega Cab 4WD, Big Horn Reg Cab 2WD, Big Horn Reg Cab 4WD, Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Limited Crew Cab 2WD, Limited Crew Cab 4WD, Limited Mega Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 2WD, Longhorn Mega Cab 4WD, Power Wagon Crew Cab 4WD, Powerwagon Crew Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Reg Cab 2WD, SLT Reg Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Reg Cab 2WD, ST Reg Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD, Tradesman Crew Cab 2WD, Tradesman Crew Cab 4WD, Tradesman Reg Cab 2WD, Tradesman Reg Cab 4WD | 6 Cyl 6.7 L DIESEL, 6 Cyl 6.7L Diesel, 8 Cyl 5.7L, 8 Cyl 5.7L CNG, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Ram 2500 Sensor-Brake Pedal
Part Number: 68078700AE
$28.61 MSRP: $39.10
You Save: $10.49 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor Brake Pedal; Stoplamp Switch
- Replaces: 68078700AD, 68078700AB, 68078700AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2023 Ram 2500 | Big Horn Crew Cab 2WD, Big Horn Crew Cab 4WD, Big Horn Mega Cab 4WD, Big Horn Reg Cab 2WD, Big Horn Reg Cab 4WD, Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Limited Crew Cab 2WD, Limited Crew Cab 4WD, Limited Mega Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 2WD, Longhorn Mega Cab 4WD, Power Wagon Crew Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Reg Cab 2WD, SLT Reg Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Reg Cab 2WD, ST Reg Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD, Tradesman Crew Cab 2WD, Tradesman Crew Cab 4WD, Tradesman Reg Cab 2WD, Tradesman Reg Cab 4WD | 6 Cyl 6.7 L DIESEL, 6 Cyl 6.7L Diesel, 8 Cyl 5.7L, 8 Cyl 5.7L CNG, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Ram 2500 Sensor-Brake Pedal
Part Number: 68078700AC
$26.39 MSRP: $39.10
You Save: $12.71 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor Brake Pedal
- Replaced by: 68078700AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013 Ram 2500 | Laramie Crew Cab 2WD, Laramie Mega Cab 2WD, Longhorn Crew Cab 2WD, Longhorn Mega Cab 2WD, SLT Crew Cab 2WD, SLT Mega Cab 2WD, SLT Regular Cab 2WD, ST Crew Cab 2WD, ST Regular Cab 2WD | 6 Cyl 6.7L Diesel, 8 Cyl 5.7L

Ram 2500 Brake Light Switch

The Brake Light Switch on Ram 2500 plays a very important role of turning on the brake lights whenever the brake is pressed. This mechanism relays a signal to the drivers Behind the Ram 2500 that the vehicle is slowing down or coming to a stand still hence increasing safety on the roads. Different types of Brake Light Switch exist and have been mounted in Ram 2500 brand through the years though distinctions between such types have not been described. Regardless of the style, the primary goal remains consistent: to pass clear information to other motorists in the road hence safe driving by all the motorists. Brake Light Switch is a vital component to the overall performance of Ram 2500 on the road hence it importance to work effectively.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Ram 2500 Brake Light Switch at great affordable prices. Moreover, all genuine Ram 2500 Brake Light Switch come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Ram 2500 Brake Light Switch Parts Questions & Experts Answers

Switch-Stop Lamp
56038914AA
Q: How to Replace the Brake Light Switch on Ram 2500?
A: Disconnect the cable(s) from the negative battery terminal(s). The switch is mounted at the brake pedal, so disconnect the wiring from the switch. Hold the brake pedal down, then turn the switch slightly clockwise and pull it from its bracket. On early 2009 models, the switch must be replaced with a new one whenever it's removed. Let up the brake pedal. For early 2009 models, hold the brake pedal down and insert the new switch into its bracket until it's properly seated, then turn it counterclockwise to lock it in place. Let go of the brake pedal, but don't pull it up. Turn the plunger release lever clockwise until it snaps into place. Make sure the switch is seated properly before moving the lever. If an error is made, the switch will have to be discarded and replaced with a new one. Connect the wiring harness and the battery cable(s). For late 2009 and later models, verify that the switch plunger is completely extended. Hold the brake pedal down and install the switch into its bracket, seating it fully. Turn the switch clockwise to lock it in place. Let go of the brake pedal to allow the switch to adjust itself. Connect the wiring harness and the battery cable(s).