How to Disconnect the Knock Sensors on Ram 2500?

To disconnect the knock sensors, disconnect the cable(s) from the negative battery terminal(s). For the 3.6L V6, remove the intake manifolds and disconnect the electrical connector before removing the sensor(s) mounting bolt(s). Finally, install the knock sensor(s) by reversing the removal process.

Genuine Ram 2500 Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Knock Sensors found

View related parts
Ram 2500 Sensor-Knock
Part Number: 5033316AB
$124.34 MSRP: $187.00
You Save: $62.66 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor Knock; Knock Sensor, Map Sensor
- Replaces: 5033316AA, 56028563AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2018 Ram 2500 | Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 2WD, Longhorn Mega Cab 4WD, Power Wagon Crew Cab 4WD, Powerwagon Crew Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Reg Cab 2WD, SLT Reg Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Reg Cab 2WD, ST Reg Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD | 8 Cyl 5.7L, 8 Cyl 5.7L CNG, 8 Cyl 6.4L
View related parts
Ram 2500 Sensor-Knock
Part Number: 5033316AA
$123.21 MSRP: $187.00
You Save: $63.79 (35%)
ADD TO CART
Product Specifications
- Other Name: Sensor Knock
- Replaced by: 5033316AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ram 2500 | Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 2WD, Longhorn Mega Cab 4WD, Power Wagon Crew Cab 4WD, Powerwagon Crew Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD | 8 Cyl 5.7L
View related parts
Ram 2500 Sensor-Knock
Part Number: 68223050AA
$22.07 MSRP: $32.55
You Save: $10.48 (33%)
ADD TO CART
Product Specifications
- Other Name: Knock Sensor
- Replaced by: 68570138AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2020 Ram 2500 | Big Horn Crew Cab 2WD, Big Horn Crew Cab 4WD, Big Horn Mega Cab 4WD, Big Horn Reg Cab 2WD, Big Horn Reg Cab 4WD, Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Limited Crew Cab 2WD, Limited Crew Cab 4WD, Limited Mega Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 2WD, Longhorn Mega Cab 4WD, Power Wagon Crew Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Reg Cab 2WD, SLT Reg Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Reg Cab 2WD, ST Reg Cab 4WD, Tradesman Crew Cab 2WD, Tradesman Crew Cab 4WD, Tradesman Reg Cab 2WD, Tradesman Reg Cab 4WD | 8 Cyl 5.7L, 8 Cyl 5.7L CNG, 8 Cyl 6.4L
View related parts
Ram 2500 KNOCK
Part Number: 68570138AA
$22.07 MSRP: $32.55
You Save: $10.48 (33%)
ADD TO CART
Product Specifications
- Other Name: Knock Sensor
- Replaces: 68223050AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2023 Ram 2500 | Big Horn Crew Cab 2WD, Big Horn Crew Cab 4WD, Big Horn Mega Cab 4WD, Big Horn Reg Cab 2WD, Big Horn Reg Cab 4WD, Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Limited Crew Cab 2WD, Limited Crew Cab 4WD, Limited Mega Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 2WD, Longhorn Mega Cab 4WD, Power Wagon Crew Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Reg Cab 2WD, SLT Reg Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Reg Cab 2WD, ST Reg Cab 4WD, Tradesman Crew Cab 2WD, Tradesman Crew Cab 4WD, Tradesman Reg Cab 2WD, Tradesman Reg Cab 4WD | 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7L, 8 Cyl 5.7L CNG, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L

Ram 2500 Knock Sensor

The Knock Sensor in Ram 2500 vehicles offers a significant function of perceiving the engine knock and consequential communicative to the powertrain control module regarding the change in ignition timing. Often piezoelectric the sensor transforms the mechanical waves in to electrical signals which are then constantly scanned for spikes to denote knock. This makes it possible to make slight alteration of the ignition time in order to enhance the workmanship of the engine and reduce incidences of component failure. Some modern systems can control timings for each cylinder or even manage boost pressure, that is, guarantee high power and durability in various conditions. The Ram 2500 vehicles for instance come with the Knock Sensor as an indication of technological advancement in the enhancement of the engines.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Ram 2500 Knock Sensor at great affordable prices. Moreover, all genuine Ram 2500 Knock Sensor come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Ram 2500 Knock Sensor Parts Questions & Experts Answers

Sensor-Knock
5033316AB
Q: How to Disconnect the Knock Sensors on Ram 2500?
A: To disconnect the knock sensors, disconnect the cable(s) from the negative battery terminal(s). For the 3.6L V6, remove the intake manifolds and disconnect the electrical connector before removing the sensor(s) mounting bolt(s). Finally, install the knock sensor(s) by reversing the removal process.