×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Ram 2500 Radiator
Cooling Radiator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
13 Radiators found
Ram 2500 Engine Cooling Radiator
Part Number: 52014720AA$1158.17 MSRP: $1785.00You Save: $626.83 (36%)
Ram 2500 Engine Cooling Radiator
Part Number: 52014738AA$843.19 MSRP: $1305.00You Save: $461.81 (36%)
Ram 2500 Radiator
The basic job of this part in Ram 2500 vehicles is to expel heat from the engine for effective running temperature. This is however done through convection, by passing coolant through narrow tubes in which the heat is transferred to the surrounding air through the large surface area and through the use of aluminum for the heat transfer. Casting through the years - Ram 2500 models may have most likely changed the form of the radiator, but mostly, the focus is on making it lightweight and affordable through using aluminum cores instead of older and heavier materials such as copper and brass. Some of the problems that a radiator might develop include cases when it will leak, for instance because the metal might be worn out or dented, and internal buildup of rust because the coolant might have become dirty. There is also need to service Ram 2500 radiator through fixing minor leakages, and flushing of cooling system in order to increase its durability.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Ram 2500 Radiator at great affordable prices. Moreover, all genuine Ram 2500 Radiator come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Ram 2500 Radiator Parts Questions & Experts Answers
- Q: How to Remove the Radiator on Ram 2500?A: To remove the gasoline engine, start by disconnecting the cable from the negative battery terminal. Then, raise the vehicle and support it securely on jackstands. Drain the cooling system and remove the cover from beneath the radiator if necessary. Use pliers to remove the lower radiator hose clamps and remove the lower fan shroud and lower electric fan wiring harness clip if applicable. Lower the truck and remove the upper radiator hose and upper radiator cover. Remove the engine-mounted viscous fan, grille, and transmission cooler lines if it's an automatic transmission-equipped vehicle. For 2009-2011 models, remove the Coolant Reservoir and windshield washer reservoir, and remove the bolts from the front of the transmission cooler and air conditioning condenser. Remove the top center clip securing the electric fan to the radiator and disconnect the transmission cooler lines. Detach the air conditioning compressor and transmission cooler from the radiator and remove the fan shroud mounting bolts. Release the fan clips from the radiator and remove the viscous engine-mounted fan, shroud, and electric fan together. For 2012 and later models, unbolt the jumper line tapping block from the radiator and detach the brackets from the air conditioning condenser and transmission cooler. Carefully release the cooler from the clip and disconnect the wiring from the electric fan. Remove the fan shroud mounting bolts and slide it to the rear. Remove the fan shroud and electric fan together. Disconnect the overflow hose from the filler neck of the radiator. For all models, remove the upper radiator mounting bolts and lift the radiator from the engine compartment. When reinstalling, inspect the radiator for leaks and damage, clean the front of the radiator, and inspect the radiator mounts. Fill the cooling system with the proper mixture of antifreeze and water, start the engine, and check for leaks.
