×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Ram 2500 Throttle Body
Fuel Injection Throttle Body- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Throttle Bodies found
Ram 2500 Throttle Body
A common component of the vehicles Ram 2500 cars is referred to as Throttle Body that has the main function of controlling the amount of fresh air that gets into the engines chamber for fuel injection. Located in between the air cleaner and intake manifold it contains a butterfly valve which opens or closes in accordance to the pedal on the accelerator. When the pedal is depressed further the valve opens more air in and at the same time the other sensors relay signals to the PCM to increase the flow of fuel as well. In the years that have elapsed this throttle body design has been used on Ram 2500: Mechanical throttle linkages as well as Electronic Throttle Control (ETC) Systems work with the traction control system and improves on safety features as well as performance. While earlier Ram 2500 models usually came with a Throttle Body Injection or even a TBI - a system cheaper and easier to implement, today's models are equipped with multi-port fuel injection which helps to increase both efficiency and emissions. However, it is also true that high mileage cars have wear or buildup on some of the parts such as Throttle Body and thus need cleaning or replacement.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Ram 2500 Throttle Body at great affordable prices. Moreover, all genuine Ram 2500 Throttle Body come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Ram 2500 Throttle Body Parts Questions & Experts Answers
- Q: How to Remove and Install a Throttle Body on a Ram 2500?A: Disconnect the cable from the negative battery terminal. Remove the air inlet tube. Disconnect the wiring harness from the throttle body. Disconnect any vacuum lines from the throttle body. Remove the four mounting bolts and remove the throttle body. Thoroughly clean all sealing surfaces. Inspect the gasket/0-ring and replace it if necessary. Install the throttle body and tighten the bolts finger tight, then tighten them with a torque wrench. The remainder of installation is the reverse of removal. On 5.7L Hemi engines, take the vehicle to a dealer or other qualified service center that has the appropriate scan tool and have them perform the ETC Relearn function.
