×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Ram 3500 Battery Cable
Car Battery Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
37 Battery Cables found
Ram 3500 Positive Battery Junction Block Cable
Part Number: 68281076AB$84.74 MSRP: $128.00You Save: $43.26 (34%)
Ram 3500 Positive Battery Junction Block Cable
Part Number: 68281076AA$84.74 MSRP: $128.00You Save: $43.26 (34%)
| Page 1 of 2 |Next >
1-20 of 37 Results
Ram 3500 Battery Cable
The Battery Cables are used in Ram 3500 cars to convey electric current from the battery to almost every electrical unit which supports operation of the starter and to initiate the vehicle's engine. These cables may starting to break due to, oxidation, casing warping, corrosion or complete failure to start due to various reasons. The Ram 3500 Battery Cables should therefore at regular intervals be inspected to confirm they are serviceable and capable of delivering a secure hookup. There may be many Battery Cables which were used in different models of Ram 3500 manufactured in different years, the change being the quality of the Battery Cable and the material used like copper. As wear and tear is a common problem, there is the availability of Premium replacement Battery Cables so as to eradicate the problems that may be caused by it. It is important to keep the Battery Cables of Ram 3500 in the premier condition possible since damaged cables affects battery performance of starting the vehicle.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Ram 3500 Battery Cable at great affordable prices. Moreover, all genuine Ram 3500 Battery Cable come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Ram 3500 Battery Cable Parts Questions & Experts Answers
- Q: How Should I Periodically Inspect Battery Cables on Ram 3500?A: Periodically inspect the entire length of each battery cable for damage, cracked or burned insulation, and corrosion. Poor battery cable connections can cause starting problems and decreased engine performance. Check the cable-to-terminal connections at the ends of the cables for cracks, loose wire strands, and corrosion. The presence of white, fluffy deposits under the insulation at the cable terminal connection is a sign that the cable is corroded and should be replaced. Check the terminals for distortion, missing mounting bolts, and corrosion. When removing the cables, always disconnect the cable from the negative battery terminal first and hook it up last to avoid accidentally shorting the battery. Even if you're only replacing the cable for the positive terminal, always disconnect the cable from the negative battery terminal first. After disconnecting the old cables from the battery, trace each of them to their opposite ends and detach them from the starter solenoid and ground terminals. Note the routing of each cable to ensure correct installation. If a cable is bundled with another wiring harness, cut the electrical tape tying them together, remove any protective sheathing, and separate them. If you are replacing either or both of the battery cables, take them with you when buying new cables to ensure identical parts. Clean the threads of the solenoid or ground connection with a wire brush to remove rust and corrosion. Apply a light coat of battery terminal corrosion inhibitor or petroleum jelly to the threads to prevent future corrosion. Attach the cable to the solenoid or ground connection and tighten the mounting nut/bolt securely. Before connecting a new cable to the battery, make sure that it reaches the battery post without having to be stretched. Connect the positive cable first, followed by the negative cable.
