×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Ram 3500 Heater Core
HVAC Heater Core- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Heater Cores found
Ram 3500 Heater Core
Heater Core in Ram 3500 vehicles is importance part of the climate control system as it supply warm air to the cabin when the heater is engaged. It works like a radiator: hot coolant from the engine is passed through the heater core while a fan is used to draw air over the core and heat the inside of the car. The Heater Core is made from aluminum or brass with fins to boost on the heat transfer rate. In Ram 3500 models, different types of Heater Core have been installed over some years, the strategies of some systems are including the valves and the electromechanical actuator for the temperature control. Heater Core is mainly used to heat the cabin but, it also act as reserve to cool the engine. Problems with Heater Core are clogging, leaks, and corrosion, because of this, the repairs are difficult, and the dashboard must be disassembled.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Ram 3500 Heater Core at great affordable prices. Moreover, all genuine Ram 3500 Heater Core come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Ram 3500 Heater Core Parts Questions & Experts Answers
- Q: How Difficult Is It to Remove a Heater Core on Ram 3500?A: Heater core removal is a challenging task for home mechanics. The entire instrument panel must be removed to access and remove the heater/air conditioning unit. The air conditioning system must be discharged, the battery cable(s) disconnected, and the cooling system drained. The heater hoses and air conditioning lines must be disconnected, and the nuts retaining the heater housing on the firewall removed. The instrument panel and air ducts must be removed. The lower bolt and two nuts retaining the heater housing must be removed, followed by the heater housing assembly. The foam insulator from the water pipe flange must be removed, and then the flange detached. Reinstall all components in reverse order, being careful not to pinch any wiring harnesses. Refill the cooling system, start the engine, and check for proper operation. Have the air conditioning system evacuated, recharged, and leak-tested by a professional shop.
