×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Ram 3500 Oil Filter
Engine Oil filter- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
9 Oil Filters found
Ram 3500 Oil Filter
The Oil Filter in the Ram 3500 vehicles is a very important component since it ensures that the engine oil is clean and not contaminated in any way. It works through filtering out the particles that are damaging while at the same time maintaining proper oil flow and it uses either cellulose or synthetic media. Its important to change the oil and the filter on a regular basis because the filter is only capable of holding so much dirt. Ram 3500 vehicles have employed both replaceable element cartridge filter and the more conventional spin on type filter. Spin-on filters come with a strong metallic casing that can withstand high oil pressure and body movements and performance filters offer high durability and filtering ability to eliminate 99% of the particles. Such performance filters are designed to work under severe conditions to guarantee proper functioning of the engine. All in all, the Oil Filter plays an important role in the Ram 3500 engine's durability and its ability to perform.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Ram 3500 Oil Filter at great affordable prices. Moreover, all genuine Ram 3500 Oil Filter come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Ram 3500 Oil Filter Parts Questions & Experts Answers
- Q: How to perform an oil and Oil Filter change for preventive maintenance on Ram 3500?A: Frequent oil changes are essential for preventive maintenance to prolong the life of the engine. It is important to have all the necessary tools and rags or newspapers ready before starting the procedure. Access to the underside of the vehicle can be improved by lifting it on a hoist, ramps, or jack stands. Familiarize yourself with the locations of the oil drain plug and oil filter before starting the oil change. Park the vehicle on a level spot and allow the engine to reach its normal operating temperature before turning it off. Raise the vehicle securely on jack stands and place a drain pan under the drain plug. Remove the plug and allow the old oil to drain completely. Inspect the old oil for any metal shavings or chips. Wipe off the drain plug and clean the area around it before reinstalling and tightening it securely. Move the drain pan under the oil filter and loosen the filter using an oil filter wrench. Wipe off the mounting surface on the block and ensure no old gasket remains. Smear clean engine oil on the rubber gasket of the new filter and attach it to the engine following the tightening directions. For 3.6L V6 engines, lift up the engine cover and remove the filter cap and filter. Remove and discard the old O-ring and insert a new filter into the cap. Apply clean engine oil to the new O-ring and thread the cap into the housing. Remove all tools and lower the vehicle. Add new oil to the engine through the oil filler cap and check the level on the dipstick. Start the engine and check for leaks. Wait for the oil to drain into the pan and recheck the level on the dipstick. After an oil change, check for leaks and proper oil level during the first few trips. Dispose of the old oil properly. To reset the oil change required light, turn the key to the On position without starting the engine and depress the accelerator pedal three times. Turn the key off and start the engine to verify that the indicator message is no longer illuminated.
