Make sure this part fits

Chrysler R0291186 60 Amp 6&8CYLINDER

1984-1987 Chrysler R0291186

Customer Questions & Expert Answers (13)
Mopar R0291186 60 Amp 6&8CYLINDER
  • Part Description
    ALTERNATOR, PROD.#4111226-60 Amp. 1986
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part NumberR0291186
    Part DescriptionALTERNATOR, PROD.#4111226-60 Amp. 1986
    Other NamesAlternator
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKUR0291186
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1984 Chrysler Executive Sedan
    1984-1987 Chrysler Fifth Avenue8 Cyl 5.2L
    1986, 1984 Chrysler Laser
    1986, 1984 Chrysler LeBaron
    1986, 1984 Chrysler New Yorker
    1986, 1984 Chrysler Town & Country
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if R0291186 fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What Are the Signs of a Faulty Alternator on Chrysler Laser? Posted by Customer
    A:
    Due to the specialized training and equipment needed to test and service the alternator, it is recommended to take the vehicle to a dealer or repair shop with the proper equipment if a problem arises. The most obvious sign of a problem is the alternator warning light on the instrument panel coming on, particularly at low speeds, indicating that the alternator is not charging. Other symptoms include dim headlights and the starter motor turning the engine over slowly, indicating a low battery state-of-charge. The first check should always be the drivebelt tension, followed by ensuring all electrical connections are secure and free of dirt and corrosion. If the drivebelt tension, electrical connections, and battery are good, an internal fault in the alternator or voltage regulator is likely. Due to the specialized tools and techniques required, diagnosis and repair should be left to a properly-equipped shop. If the vehicle has considerable miles on it, a good alternative is to replace the alternator with a rebuilt unit.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you install the alternator for the 1986 Chrysler Laser? Posted by Customer
    A:
    To install the alternator, place it in position and install the pivot bolt and nut finger-tight. Install the drivebelt and then the locking/adjusting bolts, adjusting the drivebelt tension and tightening the locking bolt. Finally, tighten the pivot bolt and nut.
    Posted by MoparPartsGiant Specialist
    Q:
    How is the current produced for the 1986 Chrysler Laser? Posted by Customer
    A:
    The rotor turns inside the stator to produce an alternating current.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done when connecting the battery cables for the 1985 Chrysler Laser? Posted by Customer
    A:
    The negative (-) cable should always be grounded, while the output (+) cable should never be grounded and should always be connected to the positive battery terminal.
    Posted by MoparPartsGiant Specialist
    Q:
    How often should the brushes be inspected for the 1984 Chrysler Laser? Posted by Customer
    A:
    The brushes should be inspected for wear after about 75,000 miles (120,000 km).
    Posted by MoparPartsGiant Specialist
    Q:
    How often should the brushes be inspected for the 1984 Dodge Daytona? Posted by Customer
    A:
    The brushes should be inspected for wear after about 75,000 miles (120,000 km).
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Alternator
    Q:
    How is the alternating current converted to direct current for the 1986 Dodge Daytona? Posted by Customer
    A:
    The alternating current is converted to direct current by diodes.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Alternator
    Q:
    How do you install the alternator for the 1986 Dodge Daytona? Posted by Customer
    A:
    To install the alternator, place it in position and install the pivot bolt and nut finger-tight. Install the drivebelt and then the locking/adjusting bolts, adjusting the drivebelt tension and tightening the locking bolt. Finally, tighten the pivot bolt and nut.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Alternator
    Q:
    What precautions should be taken when working for the 1984 Dodge Daytona? Posted by Customer
    A:
    Ensure that the battery cables are never reversed, the negative (-) cable should always be grounded, the output (+) cable should never be grounded and should always be connected to the positive battery terminal, avoid using a high voltage tester on the alternator, do not operate the engine with the voltage regulator plug disconnected, disconnect the negative battery cable first when removing the alternator or disconnecting its wiring, never operate the engine with the battery-to-alternator cable disconnected, disconnect the battery cables before charging the battery from an external source, and always observe correct polarity when using a booster battery or charger.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Alternator
    Q:
    What is the most obvious sign of a problem with the alternator for the 1986 Dodge Daytona? Posted by Customer
    A:
    The most obvious sign of a problem is the alternator warning light on the instrument panel coming on, particularly at low speeds, indicating that the alternator is not charging.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Alternator
    Q:
    What is the first step in removing the alternator for the 1985 Dodge Ramcharger? Posted by Customer
    A:
    Disconnect the negative (ground) cable from the battery.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the next step after removing the screws for the 1992 Dodge Ramcharger? Posted by Customer
    A:
    Remove the insulating washers and separate the brushes from the alternator end shield.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Alternator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part R0291186, the Right Choice

To ensure reliability, purchase Mopar part # R0291186 60 Amp 6&8CYLINDER. It is sometimes referred to as Chrysler Alternator. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler Laser, LeBaron, Town & Country models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar R0291186 60 Amp 6&8CYLINDER. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly