Chrysler 4656678AI ABSORBER-Suspension

You can Select Your Vehicle to check if 4656678AI fits your vehicle.

Mount the strut clevis bracket portion of the strut assembly in a vise, being careful not to clamp any other portion of the strut assembly. Install the spring compressor on the spring and compress it sufficiently to relieve all pressure from the upper spring seat. While holding the damper shaft from turning, loosen the shaft nut with a socket. Remove the nut and suspension support, inspecting the bearing and rubber portion for any issues. Remove the upper spring seat and dust boot from the damper shaft, as well as the rubber bumper. Carefully lift the compressed spring from the assembly and set it in a safe place, making sure to mark it for reinstallation.

Loosen the front wheel lug nuts and raise the vehicle and support it securely on jackstands.

Install the wheels and lug nuts and lower the vehicle. Finally, tighten the lug nuts to the specified torque.